Structure and properties of the Ti-Si-N nanocrystalline coatings synthesized in vacuum by the electroarc method

Phase composition, defect substructure, and mechanical properties of the Ti-Si-N coating deposited on metal and ceramic-metal substrates by electroarc sputtering of the Ti-Si composite cathode in an ionized nitrogen atmosphere are investigated by the methods of modern materials science. It is established that coatings so formed with a thickness of ∼1–3 μm are superhard (H_v ∼ 50 GPa), and have the nanocrystalline structure (with crystalline sizes D = 7 nm) based on titanium nitride δ-TiN. __________ Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Fizika, No. 2, pp. 46–51, February, 2007.     

Squeezed states and uncertainty relations since 1991

A brief review of the history of ten workshops/conferences on “Squeezed States and Uncertainty Relations” and main achievements in the related fields of quantum physics for the period from 1991 to 2007 are presented.     

Electrodynamic properties of nanoporous silicon in the range from terahertz to infrared frequencies

The dielectric response (conductivity and permittivity) spectra of a series of nanoporous silicon samples prepared by anodization of low-resistivity single-crystal silicon are measured, for the first time, using terahertz and IR spectroscopy in the frequency range 7–4000 cm^?1 at room temperature. The spectra obtained are analyzed in terms of the effective medium theory with a size-dependent dielectric response function of nanoinclusions and averaged dielectric characteristics of the surrounding medium. The geometric and dielectric characteristics of silicon nanoinclusions are determined. The dielectric properties of inclusions are found to be affected by nanosize effects, namely, carrier scattering at crystallite boundaries and a broadening of the band gap due to quantum confinement. The spectra of the samples prepared by adding iodine to the electrolyte exhibit a resonance at frequencies of 150–300 cm^?1. The nature of the resonance can be associated with the presence of chemisorbed iodine on the surface of porous silicon. Possible mechanisms responsible for the changes in broadband conductivity and permittivity spectra of single-crystal silicon upon transformation into a nanoporous structure are discussed.     

Calculation of the bond ionicity in complex oxides

A technique for calculating the bond ionicity of crystalline materials using electronegativities of elements and taking into account the structure of polyhedra of the complex-oxide structure is proposed.     

Scattering of a Rayleigh wave by monopole-dipole resonators

The problem of scattering of a Rayleigh wave by a chain of identical closely spaced monopole-dipole resonators with friction is considered. The values of resonator parameters that provide the rejection of the Rayleigh wave are found. The conditions under which the Rayleigh wave is much more efficiently reflected by the dipole resonators than by the monopole ones are determined.     

Change in the magnetic state of a surface upon formation of hydrogen bonds during adsorption

It is established that reversible adsorption of water and methyl alcohol molecules, occurring via formation of hydrogen bonds, changes the dynamic properties of domain walls in the surface region of soft ferromagnets, as well as their initial static magnetic susceptibility. A mechanism is proposed for the effects revealed.     

Magnetic structure and transport properties of atomically disordered crystals of two-dimensional manganites La2−2x Sr1+2x Mn2O7

The magnetic structure and transport properties of partially disordered crystals of two-dimensional manganites La_2?2x Sr_1+2x Mn₂O₇ (x = 0.3, 0.4) are studied over a wide range of temperatures. The crystals are transformed into an atomically disordered state under irradiation with fast neutrons at a dose of 2 × 10¹⁹ cm^?2. The average concentration of substitutional defects in the crystal is ≈4%. It is found that substitutional defects are responsible for the transition of these manganites from the ferromagnetic metal state to the insulator state with a spin glass structure. The results obtained are discussed in terms of the ratio between the kinetic energy of charge carriers and the exchange energy of localized spins.     

Geometrically qualified ESPI vibration analysis of an engine

This paper presents an application in the automotive industry where a combination of electronic speckle-pattern interferometry and laser doppler velocimetry were used at a critical stage in the design process of an internal combustion engine. Combined deformation and surface relief measurements were used to study the phase and amplitude of deformation of a vibrating engine. The relief data was combined with the interferometer geometry and used to geometrically correct the deformation data, in an effort to improve accuracy. The measurements allowed rapid identification and quantification of design weaknesses, particularly those causing undesirable resonances. This led to a significant reduction in the design time and lowering of costs, when compared with existing design optimisation methods.     

Graphitic nanofillers in PMMA nanocomposites—An investigation of particle size and dispersion and their influence on nanocomposite properties

Mechanical, thermal, and electrical properties of graphite/PMMA composites have been evaluated as functions of particle size and dispersion of the graphitic nanofiller components via the use of three different graphitic nanofillers: “as received graphite” (ARG), “expanded graphite,” (EG) and “graphite nanoplatelets” (GNPs) EG, a graphitic materials with much lower density than ARG, was prepared from ARG flakes via an acid intercalation and thermal expansion. Subsequent sonication of EG in a liquid yielded GNPs as thin stacks of graphitic platelets with thicknesses of ～10 nm. Solution‐based processing was used to prepare PMMA composites with these three fillers. Dynamic mechanical analysis, thermal analysis, and electrical impedance measurements were carried out on the resulting composites, demonstrating that reduced particle size, high surface area, and increased surface roughness can significantly alter the graphite/polymer interface and enhance the mechanical, thermal, and electrical properties of the polymer matrix. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2097–2112, 2007     

A potentiometric DNA sensor for determining autoimmune antibodies to DNA

A new technique is proposed for detecting interactions between DNA and DNA autoimmune antibodies using a potentiometric sensor based on a glassy-carbon electrode modified with polyaniline and native DNA from chicken erythrocytes. It is shown that the DNA-antibody interaction changes the rate of polyaniline doping in transferring the DNA sensor from an alkaline (pH 7.5) solution, which is optimum for the immunochemical reaction, to an acidic (pH 3.0) solution. The dynamics of the variation of the DNA sensor potential depends on the titer of antibodies and their origin. The dependence of the DNA sensor signal on the dilution of the blood sera from systemic lupus erythematosus and autoimmune thyroiditis patients shows that DNA antibodies can be diagnosed by the characteristic maximum in the dilution curve found in the range of serum dilutions from 1: 20 to 1: 50.