Thermal and field emission effects of laser radiation on metal whisker diodes: Application to infrared detection devices

In a series of recent experiments, research groups have made absolute frequency measurements with laser beams in the infrared region of the spectrum (λ ? 10 μm) using a metal point contact diode for generation, frequency mixing and detection. It has been postulated that the mechanism for the nonlinear current-voltage characteristic of the diode is tunnelling of electrons through an intermediate oxide film from the whisker into the metal base, i.e., the configuration is considered to be a metal-oxide-metal (MOM) tunnelling junction. Several features of the diode's operation create considerable doubt concerning the applicability of the MOM tunnelling mechanism. Analysis of the available experimental data led us to postulate an alternate solid state mechanism, namely a thermally enhanced field emission process. Such emission would be a consequence of the immersion of the whisker tip in the laser radiation resulting in (1) conduction heating which induces thermionic emission and (2) generation of an electric field at the tip necessary for electron tunnelling by field emission. In this paper we calculate rigorously the power absorbed in the metal whisker from the incident radiation. From the power absorbed, the heat conduction equation is solved for model geometries to obtain the laser induced temperature distribution at the whisker surface. Estimates of the electric field are obtained and combined with temperature calculations to obtain the nonlinear I–V characteristics of the thermally enhanced field emission model. Finally some simple experiments are proposed to test the thermal field emission hypothesis as a possible mechanism to explain the nonlinear characteristics of the metal whisker point contact diode.     

Hybrid gold nanoparticles in molecular imaging and radiotherapy

Metallic nanoparticles, because of their size, chemical and physical properties, are particularly attractive as therapeutic probes in treating cancer. Central to any clinical advances in nanoparticulate based therapy will be to produce hybrid nanoparticles that can be targeted to vascular, extracellular or cell surface receptors. Development of hybrid nanoparticles that specifically target cancer vasculature has received considerable attention. Most cancers have leaky vasculature and the defective vascular architecture, created due to the rapid vascularization necessary to serve fast growing cancers, in combination with poor lymphatic drainage allows increased permeation and retention effects. The leaky vasculature, because of higher porosity and permeability, serve as natural high affinity targets to metallic nanoparticles. Another attractive approach toward the application of nanotechnology to nanomedicine is the utility of nanoparticles that display inherent therapeutic properties. For example radioactive gold nanoparticles present attractive prospects in therapy of cancer. The radioactive properties of Au-198 (β_max=0.96 MeV; t_1/2=2.7 d) and Au-199 (β_max=0.46 MeV; t_1/2=3.14 d) make them ideal candidates for use in radiotherapeutic applications. In addition, they both have imageable gamma emissions for dosimetry and pharmacokinetic studies and Au-199 can be made carrier-free by indirect methods. Gold nanoparticles are of interest for treatment of disease as they can deliver agents directly into cells and cellular components with a higher concentration of radioactivity, e.g. higher dose of radioactivity, to cancerous tumor cells.     

Analysis of intermittency and probe data in a supersonic flow with injection

 Probe measurements were performed in the flow field produced by injection of helium or air into a supersonic airstream. The injectant was seeded with water and Rayleigh scattering was used to image the injectant plume. The region of the flow containing injectant–air mixture is seen to be highly unsteady, leading to the intermittent presence of injectant in certain regions. The intermittency is inferred. It is shown that bias errors can occur when the probe data is analyzed by techniques which assume steady flow. A technique for relatively bias-free analysis utilizing the intermittency measurements is presented and the bias errors are estimated. The gas-sampling probe is shown to measure the mass-weighted-mean mass fraction of helium, which is significantly less than the simple mean. A new measure of mixing efficiency obtained from the combined probe and intermittency measurements is discussed. Received: 2 February 1996/Accepted: 2 December 1996     

Influence of the boundary conditions on the fermi energy and density of states in a free-electron solid of sub-micron dimensions

Asymptotic expressions for the distribution of the eigenvalues of the Helmholtz-Schrödinger equation are used to anlyze the dependence of the Fermi energy, E_F, and the density of states, ρ(E), on sample size, shape, and electron density, in a free-electron model with Dirichlet boundary conditions. It is found that for very small samples E_F is increased relative to its asymptotic (i.e., bulk) value and ρ(E) is decreased relative to its bulk value. These effects are more pronounced for samples with low electron density and with a large surface-to-volume ratio. In general E_F and ρ(E_F) deviate significantly from their bulk values only for systems with fewer than 50,000 electrons and/or with linear dimensions of 100 Å or less. The use of smoothing functions to represent the density of states obtained from the exact eigenvalue distribution is also discussed. It is shown that an oscillating density of states leads to small cusps in the plot of E_F as a function of sample size. This is in qualitative agreement with the results of experiments on size-dependent oscillations in field emission from thin metallic films. Comparison is also made between photoemission experiments from thin films and other results obtained in this study.     

Novel bioactive breviane spiroditerpenoids from Penicillium brevicompactum Dierckx

The structures of four new, naturally occurring bioactive spiroditerpenoids, (+)-breviones B, C, D, and E, potential allelopathic agents, have been determined from extracts of semisolid fermented Penicillium brevicompactum Dierckx. The structures display the novel breviane spiroditerpenoid skeleton. Structure elucidation was performed by chemical transformations and by homo- and heteronuclear 2D-NMR spectral data. On the basis of combined studies of the theoretical conformations and NOEDIFF data, their relative stereochemistry is proposed. A mixed biogenesis for this novel family of spiroditerpenoids is tendered. The levels of activity shown by breviones B, C, and E in the etiolated wheat coleoptiles bioassay, especially breviones E (100% inhibition) and C (80% inhibition) both at 10(-4) M, suggest them as lead compounds for new agrochemicals.     

Reduction of Ekman circulation within Taylor-Couette flow

We demonstrate experimentally that independently rotating intermediary end-rings between the cylinders of a Taylor–Couette apparatus can be utilized to reduce friction-driven secondary flow, i.e. Ekman circulation. This allows for velocity profiles in a device of small aspect ratio to be less constrained by ‘end effects’, so that the resulting wide-gap flows can be made to have a radial distribution of circumferential velocity that resembles a narrow-gap Couette solution.