Synthesis,Photophysical Properties of Tribranched Chromophores Based on 1,3,5‐Triazine Core and Different Electro‐donating End‐groups

Three two‐photon absorption (TPA) tribranched chromophores were successfully prepared, in which 1,3,5‐triazine is been as electron deficient core, 1,4‐phenylenedivinylene as conjugated bridge, 3,4‐ethylenedioxythiophene (EDOT) ( T1 ), N‐methylpyrrole ( T2 ) or triphenylamine ( T3 ) as electron‐donating end‐groups. Their photophysical properties were studied by absorption, one‐ and two‐photon fluorescence and TPA cross‐section determination. The nonlinear transmission (NLT) measurement in femtoseconds (fs) regime at 800 nm indicates that TPA cross‐section (₂ values of T1 , T2 and T3 with extended Π‐conjugated bridge are much larger than the corresponding chromophore T4 with a short length bridge, and TPA cross‐section of T1 with end‐groups EDOT exhibits a remarkable enhancement compared with T2 and T3 having the same length Π‐system. The chromophores T1 , T2 and T3 show also remarkable up‐converted luminescence and optical limiting activity.     

Electrocatalysis Oxidation of GMP Based on Layered Double Hydroxide Functionalized with Anionic Surfactant and Room Temperature Ionic Liquid Modified Glassy Carbon Electrode

The electrocatalysis oxidation of guanosine‐5′‐monophosphate (GMP) was investigated on Mg‐Al layered double hydroxide (LDH) functionalized with sodium dodecyl sulfate (SDS) and room temperature ionic liquid (RTIL) modified glass carbon electrode (GCE). The cyclic voltammogram of GMP on the modified electrode (RTIL/ LDH‐SDS/GCE) exhibited a well defined anodic peak at 1.091 V in 0.2 mol·L^?1 pH 4.4 acetate buffer solution. The GMP oxidation was enhanced in the presence of anionic surfactant in the ?lms. The results suggest that the surfactant molecules intercalate the LDH layers to preconcentrate GMP molecules and the RTIL showed good ionic conductivity. The experimental parameters were optimized, the kinetic parameters were investigated and the probable oxidation mechanism was proposed. Under the optimized conditions, the oxidation peak current was proportional to GMP concentration in the range from 5.0×10^?7 to 1.0×10^?4 mol·L^?1 with the correlation coefficient of 0.9987 and the detection limit was 1.0×10^?7 mol·L^?1. The RTIL/LDH‐SDS/GCE showed a good electrochemical response to the oxidation of GMP and would be developed into a new biosensor.     

Adsorption of aqueous Hg (II) by a novel poly(aniline‐co‐o‐aminophenol)/mesoporous silica SBA‐15 composite

A novel poly(aniline‐co‐o‐aminophenol) (PAOA)/mesoporous silica SBA‐15 nanocomposite was synthesized and investigated for adsorption of Hg (II) from aqueous solutions of wide pH range. A chemical oxidation method was employed for polymerization of aniline and o‐aminophenol on an ordered SBA‐15 template to obtain a significantly enlarged BET surface area of the adsorbent. Efficiency study revealed that the PAOA/SBA‐15 could reach a maximum Hg (II) adsorption capacity of over 400 mg/g. Kinetic study showed that the Hg (II) adsorption by the PAOA/SBA‐15 fitted a pseudo‐second‐order kinetic model, indicating that the mercury adsorption process was predominantly controlled by chemical process. The results of this study also proved that the adsorbed Hg (II) could be effectively desorbed from the PAOA/SBA‐15 in 0.1M HCl and 5% sulfocarbonide solutions. Associated adsorption mechanism was also investigated by means of Fourier transform infrared (FTIR) and X‐ray photoelectron spectroscopy (XPS) techniques. Copyright © 2010 John Wiley & Sons, Ltd.     

Novel electroactive poly(arylene ether sulfone) copolymers containing pendant oligoaniline groups: Synthesis and properties

We present a series of novel poly(arylene ether sulfone) copolymers containing pendant oligoaniline groups. A novel monomer containing oligoaniline, 2,6‐difluorobenzoyl aniline tetramer (DFAT), was synthesized by reaction of 2,6‐difluorobenzoyl chloride and parent aniline tetramer and incorporated into the aforementioned copolymers via direct copolymerization with 4,4′‐dichlorodiphenyl sulfone (DCDPS), and 4,4′‐isopropylidene diphenol (BPA) using N,N′‐dimethylacetamide as solvent. The structures of these copolymers were confirmed by FTIR, ¹H NMR, and GPC. Spectral analysis of the copolymers in different oxidation states was investigated via UV‐visible spectra. The copolymers exhibited outstanding thermal stability and good solubility in various organic solvents. Their electroactivity, explored with cyclic voltammetry, was found to increase as the content of oligoaniline in the polymer increased. The electric and dielectric properties of the copolymers were also studied in detail. The electrochromic performance of the copolymers was investigated by electrochromic photographs and transmittance spectra; the color of the copolymer thin films changes from grey (at 0.0 V), to green (at 0.4 V), to blue (at 0.6 V) and to pearl blue (at 1.0 V) and the maximum transmittance change (ΔT) at 700 nm is 42.6% (90.7% ? 48.1%). © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and characterization of well‐defined lactic acid–PEG cooligomers and its tricarbonyl rhenium conjugates

This article describes the synthesis and characterization of hydroxyl tailored, molecularly defined biodegradable cooligomers capable of chelating rhenium for potential radiopharmaceuticals. New insights were gained during the synthesis of lactide based on dimethylaminopyridine‐catalyzed transesterification. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Theoretical study on influence of ligand and solvent to CdS clusters

Based on the experimental zinc blende and wurtzite structures of CdS nanocrystals, five new CdS clusters (Cd₃S₃, (Cd₃S₃)₂, (Cd₃S₃)₃, Cd₄S₄ with C_2V, and Cd₄S₄ with T_D symmetry) are investigated via optimization of their original structures at B3LYP/Lanl2dz theoretical level. Through considering integration influence of solvent and ligand, our calculated Raman and absorption spectra can be consistent with the reported experimental results. First, our calculated Raman peaks of Cd₃S₃, Cd₄S₄ (T_D), (Cd₃S₃)₂, and (Cd₃S₃)₃ are within the range of 260–290 cm^?1, which is also reported by experiment. Subsequently, for deep researching five clusters, the absorption spectra of them are calculated using time‐dependent DFT method. The wavelengths of the absorption peaks, which is calculated in solvent, increase in the order Cd₃S₃, Cd₄S₄ (T_D), (Cd₃S₃)₂, and (Cd₃S₃)₃. Moreover, the wavelengths of absorption peaks shift to blue in solvent, compared with those without solvent. Furthermore, our clusters are smaller than the size of the smallest CdS nanocrystals, the calculated absorption spectra of five clusters in solvent show obvious blue shift than the wavelengths of absorption spectra of reported CdS nanocrystals. This is induced by the quantum size effect. Besides, we further investigated the influence of ligands to CdS unit in aqueous condition. Through structures and characters analysis of S? Cd? SR, we discovered that ligands took important role during the formation of CdS nanocrystals in aqueous synthesis. Calculated results of spectra, bond length, and Wiberg bond index (WBI) values show that different ligands have similar influence on CdS unit. Moreover, using WBI values, we also confirm that Cd atom has stronger interaction with S in nanocrystals than that with S atom in ligand. © 2009 Wiley Periodicals, Inc. Int J Quantum Chem, 2011     

镝掺杂LaPO4拉曼光谱变化规律的探讨

采用水热法和后续热处理合成出单斜相LaPO4以及LaPO4:Dy3+,通过XRD对样品进行物相分析,结果表明:所得样品为LaPO4,且XRD图谱及拉曼光谱中峰位的偏移表明Dy的存在,即Dy被掺杂到LaPO4基质中。通过研究用Dy对LaPO4进行不同量掺杂后其拉曼光谱的变化规律,进而找出用Dy对LaPO4进行不同量掺杂后其内部结构的变化规律。结果显示,用Dy对LaPO4进行不同量掺杂后,随着掺杂比例的增大,晶格畸变程度先上升后下降,且在镧镝物质的量比例为1∶0.06时对基体晶格结构影响最大。     

Complementary MS Methods Assist Conformational Characterization of Antibodies with Altered S–S Bonding Networks

As therapeutic monoclonal antibodies (mAbs) become a major focus in biotechnology and a source of the next-generation drugs, new analytical methods or combination methods are needed for monitoring changes in higher order structure and effects of post-translational modifications. The complexity of these molecules and their vulnerability to structural change provide a serious challenge. We describe here the use of complementary mass spectrometry methods that not only characterize mutant mAbs but also may provide a general framework for characterizing higher order structure of other protein therapeutics and biosimilars. To frame the challenge, we selected members of the IgG2 subclass that have distinct disulfide isomeric structures as a model to evaluate an overall approach that uses ion mobility, top-down MS sequencing, and protein footprinting in the form of fast photochemical oxidation of proteins (FPOP). These three methods are rapid, sensitive, respond to subtle changes in conformation of Cys?→?Ser mutants of an IgG2, each representing a single disulfide isoform, and may be used in series to probe higher order structure. The outcome suggests that this approach of using various methods in combination can assist the development and quality control of protein therapeutics.