An electrically conductive metallocycle: densely packed molecular hexagons with π-stacked radicals

Electrical conduction among metallocycles has been unexplored because of the difficulty in creating electronic transport pathways. In this work, we present an electrocrystallization strategy for synthesizing an intrinsically electron-conductive metallocycle, [Ni₆(NDI-Hpz)₆(dma)₁₂(NO₃)₆]·5DMA·nH₂O (PMC-hexagon) (NDI-Hpz = N,N′-di(1H-pyrazol-4-yl)-1,4,5,8-naphthalenetetracarboxdiimide). The hexagonal metallocycle units are assembled into a densely packed ABCABC… sequence (like the fcc geometry) to construct one-dimensional (1D) helical π-stacked columns and 1D pore channels, which were maintained under the liberation of H₂O molecules. The NDI cores were partially reduced to form radicals as charge carriers, resulting in a room-temperature conductivity of (1.2–2.1) × 10⁻⁴ S cm⁻¹ (pressed pellet), which is superior to that of most NDI-based conductors including metal–organic frameworks and organic crystals. These findings open up the use of metallocycles as building blocks for fabricating conductive porous molecular materials.

Intrinsically electron-conductive metallocycle was synthesized. π-Radicals play a key role in constructing π-stacked columns among molecular hexagons and achieving high electrical conductivity over 10⁻⁴ S cm⁻¹ in polycrystalline pellet.     

Analysis on electrical characteristics of high-voltage GaN-based light-emitting diodes

<正>In order to investigate their electrical characteristics,high-voltage light-emitting-diodes(HV-LEDs) each containing four cells in series are fabricated.The electrical parameters including varying voltage and parasitic effect are studied. It is shown that the ideality factors(IFs) of the HV-LEDs with different numbers of cells are 1.6,3.4,4.7,and 6.4.IF increases linearly with the number of cells increasing.Moreover,the performance of the HV-LED with failure cells is examined.The analysis indicates that the failure cell has a parallel resistance which induces the leakage of the failure cell.The series resistance of the failure cell is 76.8Ω,while that of the normal cell is 21.3Ω.The scanning electron microscope(SEM) image indicates that different metal layers do not contact well.It is hard to deposit the metal layers in the deep isolation trenches.The fabrication process of HV-LEDs needs to be optimized.     

Rapid Detection of Five Estrogens Added Illegally to Dietary Supplements by Combining TLC with Raman Imaging Microscope

Estrogens added illegally to dietary supplements are hazardous to human health. Traditional detection and analysis methods have many limitations, and we have developed an assay that combines thin-layer chromatography with Raman imaging microscopy (TLC-RIM). The five estrogens (estrone, estradiol, estriol, ethinyl estradiol, and diethylstilbestrol) were initially separated by TLC, then detected by area scanning Raman imaging with a 532 nm laser under a microscope. Raman spectra were obtained for each estrogen, which were used for detecting estrogen illegally added to botanical dietary supplements. The LOD of each estrogen was 0.4, 1.0, 0.8, 0.2, and 0.2 mg/mL, respectively. The matrix in the real sample did not interfere with the detection of estrogens. The method was fast, sensitive, stable, specific, and reliable.     

Impact of the Acetaldehyde-Mediated Condensation on the Phenolic Composition and Antioxidant Activity of Vitis vinifera L. Cv. Merlot Wine

Acetaldehyde is a critical reactant on modifying the phenolic profile during red wine aging, suggesting that the acetaldehyde-mediated condensation can be responsible for the variation of antioxidant activity during the aging of this beverage. The present study employs exogenous acetaldehyde at six levels of treatment (7.86 ± 0.10–259.02 ± 4.95 mg/L) before the bottle aging of Merlot wines to encourage phenolic modification. Acetaldehyde and antioxidant activity of wine were evaluated at 0, 15, 30, 45, 60 and 75 days of storage, while monomeric and polymeric phenolics were analyzed at 0, 30 and 75 days of storage. The loss of acetaldehyde was fitted to a first-order reaction model, the rate constant (k) demonstrated that different chemical reaction happened in wines containing a different initial acetaldehyde. The disappearance of monomeric phenolics and the formation of polymeric phenolics induced by acetaldehyde could be divided into two phases, the antioxidant activity of wine did not alter significantly in the first phase, although most monomeric phenolics vanished, but the second phase would dramatically reduce the antioxidant activity of wine. Furthermore, a higher level of acetaldehyde could shorten the reaction time of the first phase. These results indicate that careful vinification handling aiming at controlling the acetaldehyde allows one to maintain prolonged biological activity during wine aging.     

ComBn(m+n≤6)团簇的结构，电子特性和磁性研究

基于密度泛函理论和卡里普索结构预测方法,系统研究了ComBn(m+n≤6)团簇的结构,电子特性和磁性。首先,通过卡里普索结构预测方法获得了体系的基态和亚稳态结构。基于基态结构,利用HOMO-LUMO能隙,垂直电离势,垂直电子亲和势和化学硬度分析了掺杂体系的稳定性。最后,研究了基态结构对应的自然布局分布,自然电子组态等电子特性和磁性。     

光谱成像技术无损鉴别西洋参饮片的研究

应用电可控液晶光谱成像装置,测定不同市售来源的西洋参饮片,以期为其质量控制提供新的方法。系统光谱分辨率5nm,光谱覆盖范围为405～680nm,空间分辨率50lp·mm-1。从成像光谱立方体中提取特征光谱曲线,构建饮片指纹图谱;采用主成分等聚类分析方法解析其指纹图谱,用于饮片真伪鉴别与质量判定。结果与性状,显微及理化鉴定结果相吻合。表明光谱成像分析技术可用于中药指纹图谱的构建和质量评价,操作方法简便、快速、无损。     

基于低相干光的阵列透镜束匀滑技术研究

基于激光加载的材料状态方程的实验研究对靶面光强分布的均匀性及稳定性提出了极高的要求,靶面光强的上述两大特性在很大程度上决定了实验结果的精度和可重复性.本文针对传统窄带高相干激光装置在激光加载材料状态方程实验中表现出的靶面光强均匀性和光强分布稳定性两方面可能存在的问题,提出了基于宽带低相干激光,利用消衍射阵列透镜联合诱导非相干技术的束匀滑方案,并重点分析了波前相位畸变对靶面不均匀性及稳定性的影响.模拟结果表明,该方法明显降低了靶面不均匀性,提高了对波前相位畸变的包容度,获得了均匀、稳定的光强分布.统计分析显示,焦斑强度分布极差和不均匀性与波前相位畸变均方根梯度相关性较强.因此,可以根据统计结果以及实验对焦斑强度分布的要求,给出波前相位畸变的容差范围,对状态方程实验中激光驱动器参数的设计与优化具有指导意义.     

Complementary MS Methods Assist Conformational Characterization of Antibodies with Altered S–S Bonding Networks

As therapeutic monoclonal antibodies (mAbs) become a major focus in biotechnology and a source of the next-generation drugs, new analytical methods or combination methods are needed for monitoring changes in higher order structure and effects of post-translational modifications. The complexity of these molecules and their vulnerability to structural change provide a serious challenge. We describe here the use of complementary mass spectrometry methods that not only characterize mutant mAbs but also may provide a general framework for characterizing higher order structure of other protein therapeutics and biosimilars. To frame the challenge, we selected members of the IgG2 subclass that have distinct disulfide isomeric structures as a model to evaluate an overall approach that uses ion mobility, top-down MS sequencing, and protein footprinting in the form of fast photochemical oxidation of proteins (FPOP). These three methods are rapid, sensitive, respond to subtle changes in conformation of Cys?→?Ser mutants of an IgG2, each representing a single disulfide isoform, and may be used in series to probe higher order structure. The outcome suggests that this approach of using various methods in combination can assist the development and quality control of protein therapeutics.      

Synthesis, structure, and activity evaluation of two silver(I) complexes as Helicobacter pylori urease inhibitors

Two silver(I) compounds, [Ag(R,R-hxn)](C₇H₄BrO₂) · 2H₂O (I) (Chxn = 1,2-diaminocyclohexane) and [Ag(C₅H₆N₂)₂]₂(C₈H₄O₄) · 10H₂O (II), were synthesized and complex I was structurally characterized by X-ray crystallography. Compound I contains a catena-(trans-1,2-diaminocyclohexane) silver polycation ([Ag(Chxn)]_∞) in a roughly linear fashion, while II possesses a linear-type silver monocation. Compounds I and II were evaluated for their inhibitory activities against Helicobacter pylori urease in vitro. Both were found to have strong inhibitory activities against H. pylori urease comparable to that of acetohydroxamic acid.