Water as an Efficient Solvent for Oxygenation Transformations with 34% Hydrogen Peroxide Catalyzed by some Heteropolyoxometalates

Summary. A highly efficient, selective, fast, and cheap protocol is developed for oxidation of aromatic amines and alcohols utilizing 34% hydrogen peroxide in water catalyzed by some W- and Mo-based heteropolyoxometalates. Findings showed that dodecatungstophosphoric acid, H₃PW₁₂O₄₀, was the most efficient catalyst in the examined oxidation reactions. This methodology may prove to be a valuable alternative for eco-friendly green oxidation. Inherent simplicity, easy work up, and using regenerable catalysts were other key aspects of this oxidation protocol.     

Hydrothermal synthesis, crystal structures and luminescent properties of two new Ln(III)–succinate (Ln=Eu, Tb) complexes exhibiting three dimensional networks

Two new coordination polymers, [Eu₂(L)₃(H₂O)₂]_n 1 and {[Tb₂(L)₃(H₂O)₂]·H₂O}_n 2, (H₂L=succinic acid) have been synthesized by the reaction of H₂L with nitrate salts of Eu(III) or Tb(III) under hydrothermal conditions. The X-ray diffraction analysis reveals that the two complexes are constructed by L bridging the chains of edge-sharing EuO₈(H₂O) or TbO₈(H₂O) polyhedra to form 3D network structure. 1 and 2 possess different topological structures due to the difference in the conformations of L. The solid photoluminescence of 1 and 2 was also investigated in room temperature.     

Identification of a chemical indicator of the rupture of 1,4-β-glycosidic bonds of cellulose in an oil-impregnated insulating paper system

In this study, headspace gas chromatography/mass spectrometry has been used to assess the volatile by-products generated by the ageing of oil-impregnated paper insulation of power transformers. Sealed-glass ampoules were used to age under oxidative conditions 0.5-g specimens of insulating paper in 9 mL of inhibited mineral oil in a temperature range of 60–120 °C and moisture of 0.5, 1 and 2% (w/w). A linear relationship between one of the oil-soluble degradation by-products, i.e. methanol, and the number of ruptured 1,4-β-glycosidic bonds of cellulose, regardless of the type of paper (ordinary Kraft or thermally-upgraded (TU) Kraft paper), was established for the first time in this field. Ageing at 130 °C of model compounds of the Kraft paper constituents (α-cellulose, hemicellulose and lignin) and two cellulosic breakdown by-products (D-(+)-glucose and 1,6-anhydro-β-d-glucopyranose) confirmed that the α-cellulose degradation was mostly responsible for the presence of this molecule in the system. Furthermore, additional 130 °C-tests with six different papers and pressboard samples under a tight control of initial moisture indicated that at least one molecule of methanol is formed for each rupture of 1,4-β-glucosidic bond of the molecular chains. Stability tests showed that the ageing indicator is stable under the oxygen and temperature conditions of open-breathing transformers. The presence of methanol was detected in 94% of oil samples collected from over than 900 in-service pieces of equipment, confirming the potential for this application. Lastly, the tests have shown that oil-oxidation by-products and TU-nitrogenous agents modify the methanol partitioning coefficients in the paper/oil/air system, which makes their study essential over a range of field conditions encountered by power transformers. Results are presented and discussed in comparison with 2-furfuraldehyde, which is the current reference in the domain.     

Organic–inorganic nanocomposites prepared from fluoro-aramid and silica

Fluoro-aramid-based sol/gel-derived nanocomposites were synthesized by condensing a mixture of 4,4′-(hexafluoro-isopropylidene)dianiline and 1,3-phenylenediamine with terephthaloylchloride (TPC) in dimethylacetamide. TPC was added in slight excess to produce amide chains with carbonyl chloride end groups and then replaced with alkoxy groups using aminophenyltrimethoxysilane to develop bonding with the silica network. Mechanical, dynamic mechanical thermal, water absorption and morphological measurements were carried out on the thin hybrid films. Increase in the tensile strength and modulus was observed as compared to pristine polyamide. The thermal decomposition temperature was found in the range of 400–500 °C. The water absorption was found to be reduced with higher silica content. The glass transition temperature and the storage moduli increased with increasing silica concentration. The maximum increase in the T _g value (345 °C) was observed with 20 wt% silica. Scanning electron microscopy revealed the uniform distribution of silica in the matrix with an average particle size ranging from 8 to 50 nm.     

酞菁铜与Q-CdS超微粒子界面的光致电荷转移研究

半导体超微粒子与有机分子界面的光致电行转移过程是当前光化学和材料科学研究的一个活跃领域［‘，2］；研究的目的主要有两个方面，一是研究半导体超微粒子表面光致电行转移的特性；二是研究有机分子对超微粒子的光敏化作用．目前，超微粒子的功能化研究日益深入，其独特的光     

在配位体络合体系中合成窄分布聚苯乙烯

本文报道了在RLi-配位体络合体系中阴离子聚合方法合成窄分布聚苯乙烯的研究结果.在己烷、庚烷、甲苯等溶液中合成分子量范围为10~2～10~3。的窄分布聚苯乙烯(MWD<1.10)时,以鹰爪豆矸、N,N,N’,N’-四甲基乙二胺为配位体的络合体系,聚合操作简便,效果非常好.在非极性溶剂中加一定比例的THF以后,该体系也能合成分子量范围为10~4～10~5的窄分布聚苯乙烯.     

煤炭液化复合铁系催化剂的研究

用微型高压釜,以杂酚油为溶剂,在反应温度400℃,氢初压6.08MPa,反应时间30分钟的条件下,研究了多种含铁矿物质、复合铁系催化剂对煤炭液化的催化效果。并用高压DTA技术进一步证实了复合铁系催化剂的良好液化加氢活性。     

PVC基管状流通钾离子选择电极的研制及其在流动注射分析中的应用

实验装置由PVC基管状流通钾离子选择电极和与它结合的流动注射分析体系两部分组成。对该体系的分析特点和影响测定的参数进行了讨论,建立了土壤浸提液中钾测定方法,样品分析结果和火焰光度法有良好一致性。     

Phase Diagram and Properties of Glasses of the System Sb<Subscript>2</Subscript>S<Subscript>3</Subscript>-AgI

The phase diagram of the system Sb₂S₃-AgI was constructed from data of the differential thermal and X-ray phase analyses. The physicochemical properties of glassy and crystalline alloys were studied.