Optical and Electrical Properties of Polymerizing Plasmas and Their Correlation with DLC Film Properties

Diamond-like carbon (DLC) films were grown from radiofrequency plasmas of acetylene-argon mixtures, at different excitation powers, P. The effects of this parameter on the plasma potential, electron density, electron temperature, and plasma activity were investigated using a Langmuir probe. The mean electron temperature increased from about 0.5 to about 7.0 eV while the mean electron density decreased from about 1.2 × 10⁹ to about 0.2 × 10⁹ cm^–3 as P was increased from 25 to 150 W. Both the plasma potential and the plasma activity were found to increase with increasing P. Through actinometric optical emission spectrometry, the relative concentrations of CH, [CH], and H, [H], in the discharge were mapped as a function of the applied power. A rise in [H] and a fall in [CH] with increasing P were observed and are discussed in relation to the plasma characteristics and the subimplantation model. The optical properties of the films were calculated from ultraviolet-visible spectroscopic data; the surface resistivity was measured by the two-point probe method. The optical gap, E _G, and the surface resistivity, _s, fall with increasing P. E _G and _s are in the ranges of about 2.0–1.3 eV and 10¹⁴–10¹⁶ /, respectively. The plasma power also influences the film self-bias, V _b, via a linear dependence, and the effect of V _b on ion bombardment during growth is addressed together with variation in the relative densities of sp² and sp³ bonds in the films as determined by Raman spectroscopy.     

Interfacial properties of pulmonary surfactant layers

The composition of the pulmonary surfactant and the border conditions of normal human breathing are relevant to characterize the interfacial behavior of pulmonary layers. Based on experimental data methods are reviewed to investigate interfacial properties of artificial pulmonary layers and to explain the behavior and interfacial structures of the main components during compression and expansion of the layers observed by epifluorescence and scanning force microscopy. Terms like over-compression, collapse, and formation of the surfactant reservoir are discussed. Consequences for the viscoelastic surface rheological behavior of such layers are elucidated by surface pressure relaxation and harmonic oscillation experiments. Based on a generalized Volmer isotherm the interfacial phase transition is discussed for the hydrophobic surfactant proteins, SP-B and SP-C, as well as for the mixtures of dipalmitoylphosphatidylcholine (DPPC) with these proteins. The behavior of the layers depends on both the oligomerisation state and the secondary structure of the hydrophobic surfactant proteins, which are controlled by the preparation of the proteins. An example for the surface properties of bronchoalveolar porcine lung washings of uninjured, injured, and Curosurf treated lavage is discussed in the light of surface behavior. An outlook summarizes the present knowledge and the main future development in this field of surface science.     

Characterization and complementation of a Pichia stipitis mutant unable to grow on d-xylose or l-arabinose

Pichia stipitis CBS 6054 will grow on d-xylose, d-arabinose, and l-arabinose. d-Xylose and l-arabinose are abundant in seed hulls of maize, and their utilization is important in processing grain residues. To elucidate the degradation pathway for l-arabinose, we obtained a mutant, FPL-MY30, that was unable to grow on d-xylose and l-arabinose but that could grow on d-arabinitol. Activity assays of oxidoreductase and pentulokinase enzymes involved in d-xylose, d-arabinose, and l-arabinose pathways indicated that FPL-MY30 is deficient in d-xylitol dehydrogenase (D-XDH), d- and l-arabinitol dehydrogenases, and d-ribitol dehydrogenase. Transforming FPL-MY30 with a gene for xylitol dehydrogenase (PsXYL2), which was cloned from CBS 6054 (Gen Bank AF127801), restored the D-XDH activity and the capacity for FPL-MY30 to grow on l-arabinose. This suggested that FPL-MY30 is critically deficient in XYL2 and that the d-xylose and l-arabinose metabolic pathways have xylitolas a common intermediate. The capacity for FPL-MY30 to grow on d-arabinitol could proceed through d-ribulose.     

Synthesis,characterization and anticancer activity of new palladacycles derived from chiral α‐diimines

Optically pure α‐diimines quantitatively obtained in solvent‐free conditions starting from 2,3‐butanedione and (S)‐(?)‐1‐phenylethylamine and (S)‐(?)‐1‐(4‐methylphenyl)ethylamine, respectively, yielded the new chiral mono‐Pd complexes 2a–b, which have been partly characterized by IR, ¹H‐ and ¹³C‐NMR spectroscopies along with MS‐FAB⁺ spectrometry. The crystal and molecular structure for palladacycle 2a has been fully confirmed by single‐crystal X‐ray studies. Studies in vitro of 2a–b have displayed growth inhibition against different classes of cancer: leukemia (K‐562 CML), colon cancer (HCT‐15), breast cancer (MCF‐7), central nervous system (U‐251 Glio) and prostate cancer (PC‐3) cell lines. Copyright © 2009 John Wiley & Sons, Ltd.     

Complexation of Hg2+ with α‐Lipoic and Dihydrolipoic Acids: Study by Differential Pulse Voltammetry on Rotating Au‐Disk Electrode and ESI‐MS

The complexation of the natural antioxidants α‐lipoic acid (ALA) and its reduced form dihydrolipoic acid (DHLA) with Hg²⁺ was investigated by a recently proposed differential pulse voltammetric (DPV) method using the rotating Au‐disk electrode. Complexation processes are proposed from the multivariate curve resolution by alternating least squares (MCR‐ALS) analysis of DPV titration data. Main complexes were both 1 : 1 Hg : ALA and Hg : DHLA, although the formation of 1 : 2 complexes can be also deduced. ALA and DHLA show different Hg²⁺‐binding patterns at different pH. Voltammetric findings are completed with the data obtained by electrospray ionization mass‐spectrometry (ESI‐MS), especially in negative mode.     

Density functional study for the polymerization of ethylene monomer using a new nickel catalyst

The present computational study was designed to study the polymerization of ethylene catalyzed by a new Ni‐based PymNox organometallic compound. Recently, we have synthesized and tested the behavior of this type of catalyst in olefin polymerization. It has been experimentally observed that the unsubstituted catalyst Ni2 (aldimino PymNox catalyst ) is less active than the methyl substituted Ni1 (acetaldimino PymNox catalyst ) analogue. The reactivity of both catalysts was examined using density functional theory (DFT) models. Our results indicate that the methyl substituted Ni1 introduces some additional steric hindrance that probably renders a more suitable catalyst conformation for the monomer incorporation. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1160–1165, 2010     

Synthesis and characterization of WO3 nanoparticles prepared by the precipitation method: Evaluation of photocatalytic activity under vis-irradiation

WO₃ nanoparticles were synthesized by the precipitation method varying the time employed in the formation of their precursor in aqueous media and the calcination temperature. The WO₃ crystallization process and morphology of the synthesized samples were followed by the XRD, TEM and SEM techniques. The effects of the calcination temperature on the surface area and optical properties of the WO₃ nanoparticles were also investigated. Nanoparticles with morphologies such as square and rectangular plates and ovoid forms were observed for the different experimental conditions. WO₃ nanoparticles with different morphologies were tested for the photocatalytic degradation of organic dyes. In general, the photocatalysts showed a capacity to bleach the dye solution in the following sequence: indigo carmine (IC) > rhodamine B (rhB) > congo red (CR). The extent of mineralization was determined by means of total organic carbon (TOC) measurements, which showed a satisfactory TOC reduction (93%, within 75 h) only for IC. This value was even better than the one concerning the P-25 Degussa reference.     

Optimization of a solid-phase extraction procedure in the fluorimetric determination of sulfonamides in milk using the second-order advantage of PARAFAC and D-optimal design

The objective of this work is to optimize a solid-phase extraction procedure for the simultaneous determination of sulfadiazine, sulfamerazine, and sulfamethazine in milk by fluorimetric detection. For this task, an alternative strategy is employed, which allows one to reduce noticeably the number of experiments without losing the quality of the estimations. It consists of the use of a D-optimal design together with PARAFAC decomposition for the calculation of the response in the experimental design. Effects of amount of cartridge sorbent, kind of milk, volume of conditioning solutions, kind of wash and elution, and kind of mixture of sulfonamides have been evaluated, for maximizing sulfonamide mean recovery and minimizing its standard deviation. Since milk without sulfonamides may give some matrix effect over the fluorescence signal, its behavior has also been studied. Optimal conditions have been selected where the ratio between sulfonamide recovery and milk without sulfonamides was the highest, which are 500 mg of cartridge sorbent, acid wash, and elution and 3 mL of conditioning solutions. The type of milk and mixture of sulfonamides not significant. This makes the procedure suitable for the combined determination of sulfadiazine, sulfamerazine, and sulfamethazine in any kind of milk. Finally, an experimental procedure is proposed, obtaining a sulfonamide mean recovery equal to 68.5% with values of standard deviation between 7 and 8 μg kg⁻¹.     

Trichoderma harzianum IOC-4038: A Promising Strain for the Production of a Cellulolytic Complex with Significant β-Glucosidase Activity from Sugarcane Bagasse Cellulignin

Sugarcane bagasse is an agroindustrial residue generated in large amounts in Brazil. This biomass can be used for the production of cellulases, aiming at their use in second-generation processes for bioethanol production. Therefore, this work reports the ability of a fungal strain, Trichoderma harzianum IOC-4038, to produce cellulases on a novel material, xylan free and cellulose rich, generated from sugarcane bagasse, named partially delignified cellulignin. The extract produced by T. harzianum under submerged conditions reached 745, 97, and 559 U L⁻¹ of β-glucosidase, FPase, and endoglucanase activities, respectively. The partial characterization of this enzyme complex indicated, using a dual analysis, that the optimal pH values for the biocatalysis ranged from 4.9 to 5.2 and optimal temperatures were between 47 and 54 °C, depending on the activity studied. Thermal stability analyses revealed no significant decrease in activity at 37 °C during 23 h of incubation. When compared to model strains, Aspergillus niger ATCC-16404 and Trichoderma reesei RutC30, T. harzianum fermentation was faster and its extract showed a better balanced enzyme complex, with adequate characteristics for its application in simultaneous saccharification and fermentation processes.     

Desirability functions as response in a d‐optimal design for evaluating the extraction and purification steps of six tranquillizers and an anti‐adrenergic by liquid chromatography‐tandem mass spectrometry

Internal standards can be added at different stages of an analytical procedure. When they are added at the beginning of a multiresidue method and their behavior is not exactly the same as that of the analytes, the intended correction for small variations within the analytical process could not be achieved. Because of this, in the present work, the use of d ‐optimal designs together with desirability functions is proposed to state the experimental response under study. The overall desirability function used relates two analytical criteria: to assess a similar chemical behavior of each analyte in relation to its internal standard and to avoid a significant reduction of the absolute peak area of the internal standards. This strategy has been applied to the analysis of the effect of four factors related to the extraction and purification steps of six tranquillizers and a β‐blocker from pig muscle analyzed by liquid chromatography–tandem mass spectrometry. The effect of those factors has been evaluated by means of an ad hoc d ‐optimal design consisting of only 11 experiments. The resulting levels of the four factors that enable to achieve the greatest overall desirability have also been compared with those obtained when either the standardized or absolute peak area has been considered as response. Differences in both the significant factors and their optimum levels have been observed. It is noticeable that the experimental effort necessary to study the effect of the factors has been reduced by more than 50% thanks to the d ‐optimal design. Copyright © 2015 John Wiley & Sons, Ltd.