Competition between H and CO for Active Sites Governs Copper‐Mediated Electrosynthesis of Hydrocarbon Fuels

The dynamics of carbon monoxide on Cu surfaces was investigated during CO reduction, providing insight into the mechanism leading to the formation of hydrogen, methane, and ethylene, the three key products in the electrochemical reduction of CO₂. Reaction order experiments were conducted at low temperature in an ethanol medium affording high solubility and surface‐affinity for carbon monoxide. Surprisingly, the methane production rate is suppressed by increasing the pressure of CO, whereas ethylene production remains largely unaffected. The data show that CH₄ and H₂ production are linked through a common H intermediate and that methane is formed through reactions among adsorbed H and CO, which are in direct competition with each other for surface sites. The data exclude the participation of solution species in rate‐limiting steps, highlighting the importance of increasing surface recombination rates for efficient fuel synthesis.     

Spontaneous Isomerization of Peptide Cation Radicals Following Electron Transfer Dissociation Revealed by UV-Vis Photodissociation Action Spectroscopy

Peptide cation radicals of the z-type were produced by electron transfer dissociation (ETD) of peptide dications and studied by UV-Vis photodissociation (UVPD) action spectroscopy. Cation radicals containing the Asp (D), Asn (N), Glu (E), and Gln (Q) residues were found to spontaneously isomerize by hydrogen atom migrations upon ETD. Canonical N-terminal [z₄ + H]^+● fragment ion-radicals of the R-C^●H-CONH- type, initially formed by N?C_α bond cleavage, were found to be minor components of the stable ion fraction. Vibronically broadened UV-Vis absorption spectra were calculated by time-dependent density functional theory for several [^●DAAR + H]⁺ isomers and used to assign structures to the action spectra. The potential energy surface of [^●DAAR + H]⁺ isomers was mapped by ab initio and density functional theory calculations that revealed multiple isomerization pathways by hydrogen atom migrations. The transition-state energies for the isomerizations were found to be lower than the dissociation thresholds, accounting for the isomerization in non-dissociating ions. The facile isomerization in [^●XAAR + H]⁺ ions (X = D, N, E, and Q) was attributed to low-energy intermediates having the radical defect in the side chain that can promote hydrogen migration along backbone C_α positions. A similar side-chain mediated mechanism is suggested for the facile intermolecular hydrogen migration between the c- and [z + H]^●-ETD fragments containing Asp, Asn, Glu, and Gln residues.

Open image in new window

Graphical Abstract ?

     

Development of Abraham model correlations for describing the transfer of molecular solutes into propanenitrile and butanenitrile from water and from the gas phase

Experimental solubilities were measured for 20 crystalline organic solutes dissolved in propanenitrile and for 13 crystalline organic solutes dissolved in butanenitrile at 298.15 K. Infinite dilution activity coefficient data for solutes dissolved in propanenitrile and butanenitrile have been compiled from the published chemical and engineering literature and converted into gas-to-liquid partition coefficients and water-to-organic solvent partition coefficients through standard thermodynamic relationships. Abraham model correlations were developed for describing solute transfer into both propanenitrile and butanenitrile by combining our measured solubility data with the partition coefficients that we calculated from the published activity coefficient data. The derived Abraham model correlations were found to back-calculate the observed partition coefficients and molar solubility data to within 0.14 log units.     

NMR difference spectroscopy with a dual saddle-coil difference probe

A new difference probe for nuclear magnetic resonance (NMR) spectroscopy is presented. The difference probe uses two saddle-shaped coils to excite and detect two samples simultaneously. The samples are held in a specially modified 3-mm NMR tube with an Ultem plastic disk to separate the samples. The probes resonant circuit contains two crossed diodes that passively switch the relative phase of each coil during the NMR experiment. The result is a difference spectrum from the two samples. The degree of cancellation of common signals was determined to be approximately 90%, and the application of the probe to relaxation-edited difference spectroscopy for identifying protein–ligand interactions was demonstrated using glutathione and glutathione S-transferase binding protein.     

Morpholino‐Functionalized and Heteroaryl‐Substituted Titanocene Anti‐Cancer Drugs: Synthesis and Cytotoxicity Studies

From the carbolithiation of 6‐morpholino fulvene ( 3a ) and different ortho‐lithiated heterocycles (furan, thiophene and N‐methylpyrrole), the corresponding lithium cyclopentadienide intermediate ( 4a – c ) was formed. These three lithiated intermediates underwent a transmetallation reaction with TiCl₄ resulting in morpholino‐functionalised titanocenes 5a – c . When these titanocenes were tested against LLC‐PK cells, the IC₅₀ values obtained were of 58, 63 and 115 μM for titanocenes 5a – c respectively. The most cytotoxic titanocene 5a with an IC₅₀ value of 58 μM is found to be approximately 20 times less cytotoxic than cis‐platin, which showed an IC₅₀ value of 3.3 μM, when tested on the LLC‐PK cell line, and 10 times less cytotoxic than its dimethylamino‐functionalised analogue (Titanocene C , IC₅₀ = 5.5 μM).     

Capillary waveguide nucleic acid based biosensor

Micro-capillaries are finding increasing utility in the development of portable analytical sensors. We present design guidelines for optimizing the collection of free propagating fluorescence for capillary waveguide sensors used in the detection of nucleic acids. A dual function integrated opto/fluid connector is also described. Evanescent wave excitation of the coating layer containing a DNA probe is achieved by using a fiber optic ring arrangement for coupling light directly into the capillary wall. The central part of the connector is used for injecting a DNA or RNA target into the capillary channel. In situ hybridization has been used to detect target molecules at a concentration of 30 pg ml⁻¹. The sensor can be regenerated for repeated detection of DNA or RNA targets.     

Efficiency of the dry–wet method for the MALDI‐MSI analysis of latent fingermarks

Matrix‐assisted laser desorption/ionisation mass spectrometry imaging (MALDI‐MSI) has proven to be a powerful analytical tool to investigate problems in several fields of life science. A novel application is in the field of forensics, particularly in the analysis of latent fingermarks. This technology enables images of the fingermark ridge detail and additional intelligence to be simultaneously obtained. Although several methods are available to deposit the MALDI matrix, to make the technology forensically operational, another deposition approach was devised and reported, namely the ‘dry–wet’ method. In the present study, the efficiency of the dry–wet method was evaluated and compared with the conventional spray coat methodology. Results indicate that the dry–wet method is superior for all the donors' typologies in terms of ion signal intensity and clarity of the ridge details. To underpin the reasons of this efficiency, scanning electron microscopy analyses were carried out in parallel to MALDI‐MSI experiments using matrices of different particle size. Results have confirmed that the particle size plays an important role in the efficiency of the method as higher quality images and higher intensity spectra are produced as the matrix particle size decreases. Copyright © 2013 John Wiley & Sons, Ltd.     

Optimized constraints for the linearized geoacoustic inverse problem

A geoacoustic inversion scheme to estimate the depth-dependent sound speed characteristics of the shallow-water waveguide is presented. The approach is based on the linearized perturbative technique developed by Rajan et al. [J. Acoust. Soc. Am. 82, 998-1017 (1987)]. This method is applied by assuming a background starting model for the environment that includes both the water column and the seabed. Typically, the water column properties are assumed to be known and held fixed in the inversion. Successful application of the perturbative inverse technique lies in handling issues of stability and uniqueness associated with solving a discrete ill-posed problem. Conventionally, such problems are regularized, a procedure which results in a smooth solution. Past applications of this inverse technique have been restricted to cases for which the water column sound speed profile was known and sound speed in the seabed could be approximated by a smooth profile. In this work, constraints that are better suited to specific aspects of the geoacoustic inverse problem are applied. These techniques expand on the original application of the perturbative inverse technique by including the water column sound speed profile in the solution and by allowing for discontinuities in the seabed sound speed profile.