The interaction between adsorbed OH and O2 on TiO2 surfaces

Reduced TiO₂(110) surfaces usually have OH groups as a result of H₂O dissociation at oxygen vacancy defects. Because of excess electrons due to OH adsorption, OH/TiO₂ exhibit interesting properties favorable to further O₂ or H₂O adsorption. Both O₂ and H₂O can adsorb and easily diffuse on the OH/TiO₂ surface; such behavior plays a significant role in photocatalysis, heterogeneous catalysis, electronic devices and sensors. Indeed, the processes of H₂O dissociation, O₂ and H₂O diffusion on such TiO₂ surfaces, in the presence of OH groups, are important issues in their own right. Herein, the most recent experimental and theoretical progresses in understanding the interactions between adsorbed OH groups and O₂, or H₂O, over TiO₂(110) surfaces and their implications will be reviewed.     

The lowest 2A' excited state of the water-hydroxyl complex

Vertical and adiabatic excitation energies of the lowest (2)A(') excited state in the water-hydroxyl complex have been determined using coupled cluster, multireference configuration interaction, multireference perturbation theory, and density-functional methods. A significant redshift of about 0.4 eV in the vertical excitation energy of the complex compared to that of the hydroxyl radical monomer is found with the coupled cluster calculations validating previous results. Electronic excitation leads to a structure with near-equal sharing of the hydroxyl hydrogen by both oxygen atoms and a concomitantly large redshift of the adiabatic excitation energy of approximately 1 eV relative to the vertical excitation energy. The combination of redshifts ensures that the electronic transition in the complex lies well outside the equivalent excitation in the hydroxyl radical monomer. The complex is approximately five times more strongly bound in the excited state than in the ground state.     

Protonated 2-methyl-1,2-epoxypropane: a challenging problem for density functional theory

Protonated epoxides feature prominently in organic chemistry as reactive intermediates. Herein, we describe 10 protonated epoxides using B3LYP, MP2, and CCSD/6-311++G calculations. Relative to CCSD, B3LYP consistently overestimates the C2-O bond length. Protonated 2-methyl-1,2-epoxypropane is the most problematic species studied, where B3LYP overestimates the C2-O bond length by 0.191 angstroms. Seventeen other density functional methods were applied to this protonated epoxide; on average, they overestimated the CCSD bond length by 0.2 angstroms. We present a range of data that suggest the difficulty for DFT methods in modeling the structure of the titled protonated epoxide lies in the extremely weak C2-O bond, which is reflected in the highly asymmetric charge distribution between the two ring carbons. Protonated epoxides featuring more symmetrical charge distribution and cyclic homologues featuring less ring strain are treated with greater accuracy by B3LYP. Finally, MP2 performed very well against CCSD, deviating in the C2-O bond length at most by 0.009 angstroms; it is, therefore, recommended when computational resources prove insufficient for coupled cluster methods.     

Two-dimensional vectorial photonic crystals formed in azo-dye-doped liquid crystals

A 2D, square lattice, vectorial photonic crystal is formed by vectorial holography using an azo-dye-doped liquid-crystal material. Four coherent beams are interfered to generate a highly stable, switchable polarization holography structure. The formation of the vectorial lattice by the liquid-crystal molecular orientation is confirmed by diffraction pattern and polarization microscopy analysis. Simulations of the alignment and diffraction pattern are in good agreement with the experimental results. Polarization sensitive diffraction behavior is also consistent with the Kakichashvili model.     

Photochemical properties of selected flavonol dyes: Effects on their separation using capillary electrophoresis

Flavonols are naturally occurring dyes that can be extracted from plants. Because of their antioxidant properties, they are thought to have health benefits. In this study, the photochemical degradation properties of selected flavonols were investigated. Dilute solutions of dyes were exposed to light from a broadband visible light source, and the rate of photodegradation was determined by measuring the decrease in fluorescence of the dyes with respect to time. At pH 9.24, the first-order rate constants for 10?µg?mL^?1 solutions of myricetin, quercetin, kaempferol, and morin were 0.468, 0.162, 0.108, and 0.126?s^?1, respectively. Interestingly, the stability of these historical dyes was also found to be greatly affected by pH. Awareness of the photochemical properties and stability of flavonol dyes is very important for capillary electrophoresis (CE) separations. Photodegradation of the flavonol dyes under the alkaline conditions (pH 9.2) used in CE can have a profound effect on the reproducibility of repeated separations. Even a modest decrease in pH (pH 8.5) greatly improved the stability of these dyes and enabled the successful separation of these flavonol dyes with minimal degradation over time.     

Synthesis of 2- and 2,7-functionalized pyrene derivatives: an application of selective C-H borylation

An efficient synthetic route to 2- and 2,7-substituted pyrenes is described. The regiospecific direct C-H borylation of pyrene with an iridium-based catalyst, prepared in situ by the reaction of [{Ir(μ-OMe)cod}(2)] (cod = 1,5-cyclooctadiene) with 4,4'-di-tert-butyl-2,2'-bipyridine, gives 2,7-bis(Bpin)pyrene (1) and 2-(Bpin)pyrene (2, pin = OCMe(2)CMe(2)O). From 1, by simple derivatization strategies, we synthesized 2,7-bis(R)-pyrenes with R = BF(3)K (3), Br (4), OH (5), B(OH)(2) (6), and OTf (7). Using these nominally nucleophilic and electrophilic derivatives as coupling partners in Suzuki-Miyaura, Sonogashira, and Buchwald-Hartwig cross-coupling reactions, we obtained 2,7-bis(R)-pyrenes with R = (4-CO(2)C(8)H(17))C(6)H(4) (8), Ph (9), C≡CPh (10), C≡C[{4-B(Mes)(2)}C(6)H(4)] (11), C≡CTMS (12), C≡C[(4-NMe(2))C(6)H(4)] (14), C≡CH (15), N(Ph)[(4-OMe)C(6)H(4)] (16), and R = OTf, R' = C≡CTMS (13). Lithiation of 4, followed by reaction with CO(2), yielded pyrene-2,7-dicarboxylic acid (17), whilst borylation of 2-tBu-pyrene gave 2-tBu-7-Bpin-pyrene (18) selectively. By similar routes (including Negishi cross-coupling reactions), monosubstituted 2-R-pyrenes with R = BF(3)K (19), Br (20), OH (21), B(OH)(2) (22), [4-B(Mes)(2)]C(6)H(4) (23), B(Mes)(2) (24), OTf (25), C≡CPh (26), C≡CTMS (27), (4-CO(2)Me)C(6)H(4) (28), C≡CH (29), C(3)H(6)CO(2)Me (30), OC(3)H(6)CO(2)Me (31), C(3)H(6)CO(2)H (32), OC(3)H(6)CO(2)H (33), and O(CH(2))(12)Br (34) were obtained from 2. These derivatives are of synthetic and photophysical interest because they contain donor, acceptor, and conjugated substituents. The crystal structures of compounds 4, 5, 7, 12, 18, 19, 21, 23, 26, and 28-31 have also been obtained from single-crystal X-ray diffraction data, revealing a diversity of packing modes, which are described in the Supporting Information. A detailed discussion of the structures of 1 and 2, their polymorphs, solvates, and co-crystals is reported separately.     

Use of F-BODIPYs as a protection strategy for dipyrrins: optimization of BF(2) removal

We recently reported the first general method for the deprotection of 4,4-difluoro-4-bora-3a,4a-diaza-s-indacenes (F-BODIPYs) involving a microwave-assisted procedure for the removal of the BF(2) moiety, and liberation of the corresponding free-base dipyrrin. Further optimization of the reaction has resulted in a more convenient and accessible protocol. The availability of this new methodology enables BF(2)-complexation to be used as a dipyrrin protection strategy. Herein lies a detailed examination of the deprotection reaction, with a view to optimization and gaining mechanistic insight, and its application in facilitating a multistep synthesis of pyrrolyldipyrrins.     

The optical activity of carvone: a theoretical and experimental investigation

The optical rotatory dispersion (ORD) and circular dichroism of the conformationally flexible carvone molecule has been investigated in 17 solvents and compared with results from calculations for the "free" (gas phase) molecule. The G3 method was used to determine the relative energies of the six conformers. The optical rotation of (R)-(-)-carvone at 589 nm was calculated using coupled cluster and density functional methods, including temperature-dependent vibrational corrections. Vibrational corrections are significant and are primarily associated with normal modes involving the stereogenic carbon atom and the carbonyl group, whose n → π? excitation plays a significant role in the chiroptical response of carvone. Without the inclusion of vibrational corrections the optical rotation calculated with CCSD and DFT has the opposite sign of experimental data. Calculations of optical rotation performed in solution using the polarizable continuum model were also opposite in sign when compared to that of the experiment.