Mössbauer effect of iodine at pressures to 30 GPa

We report the first high pressure¹²⁹I Mössbauer measurements with elemental iodine at pressures to 30 GPa. A 20 mg/cm^{2 129}I₂ absorber was mounted in a diamond anvil cell with an effective diameter of 0.21 mm. The source used was Mg₃ ^129mTeO₆. Experiments were performed mainly at 4 K and the pressure was monitored by the ruby fluorescence method. With increasing pressure we observe a gradual decrease in ¦e²qQ¦ and an increase in IS and values of the low pressure, molecular phase; at 16 GPa a new phase (HP1) is detected characterized by a change in sign of e²qQ and a smaller value of ¦e²qQ¦, and a substantial increase in . At 24 GPa a new phase (HP2) is formed that is characterized by a smaller value of . In general the population of the molecular phase decreases from 1.0 near 15 GPa to a value of 0.4 at 30 GPa. The fraction of the high pressure phase (HP1 + HP2) increases at the expense of the molecular phase and that of the HP2 at the expense of the HP1 phase. These observations are discussed in relation to the onset of a metallic phase near 16 GPa and recent x-ray diffraction studies.Work performed under the auspices of the U.S. Department of Energy.     

Fabrication of highly ordered TiO2 nanotube arrays using an organic electrolyte

Anodization of titanium in a fluorinated dimethyl sulfoxide (DMSO) and ethanol mixture electrolyte is investigated. The prepared anodic film has a highly ordered nanotube-array surface architecture. Using a 20 V anodization potential (vs Pt) nanotube arrays having an inner diameter of 60 nm and 40 nm wall thickness are formed. The overall length of the nanotube arrays is controlled by the duration of the anodization, with nanotubes appearing only after approximately 48 h; a 72 h anodization results in a nanotube array approximately 2.3 mum in length. The photoelectrochemical response of the nanotube-array photoelectrodes is studied using a 1 M KOH solution under both UV and visible (AM 1.5) illumination. Enhanced photocurrent density is observed for samples obtained in the organic electrolyte, with an UV photoconversion efficiency of 10.7%.     

Probe metal binding mode of imine covalent organic frameworks: cycloiridation for (photo)catalytic hydrogen evolution from formate

Metalation of covalent organic frameworks (COFs) is a critical strategy to functionalize COFs for advanced applications yet largely relies on the pre-installed specific metal docking sites in the network, such as porphyrin, salen, 2,2′-bipyridine, etc. We show in this study that the imine linkage of simple imine-based COFs, one of the most popular COFs, readily chelate transition metal (Ir in this work) via cyclometalation, which has not been explored before. The iridacycle decorated COF exhibited more than 10-fold efficiency enhancement in (photo)catalytic hydrogen evolution from aqueous formate solution than its molecular counterpart under mild conditions. This work will inspire more functional cyclometallated COFs to be explored beyond catalysis considering the large imine COF library and the rich metallacycle chemistry.

This study describes cyclometallation as a new metal binding mode for imine-based COFs. The iridacycle decorated COF could be used for catalytic hydrogen evolution from aqueous formate solution with high stability and high efficacy.     

Stereoselective diels-alder reactions between 9-alkyl-1,4-dihydronaphthalen-1,4-imines and 2-alkylisoindoles

The Diels-Alder reaction between 9-alkyl-1,4-dihydronaphthalen-1,4-imines ($\text{1}$) and 2-alkylisoindoles ($\text{2}$) occurs in refluxing xylene to give exclusively the exo-endo cyclo-adducts $\text{3}$ ($\text{D}$).     

Emission from aromatic hydrocarbon-diene and -olefin exciplexes

Luminescence from aromatic hydrocarbon-olefin and -diene exciplexes, providing strong evidence for their intermediary in singlet quenching processes, is reported. Solvent dependence of the emission maximum gives a value of 10.8D for the dipole moment of the 1-cyanonaphthalene-1,2-dimethylcyclopentene exciplex while the temperature dependence affords a value of 6.7 kcal/M for the heat of formation. Linear-free-energy correlations of rate constants for 1-cyanonaphthalene and naphthalene fluorescence quenching by dienes and olefins and strained hydrocarbons with the adiabatic ionization potentials of the quenchers are consistent with major contributions from charge-resonance in the exciplex formation process.     

Treatment of cutaneous T cell lymphoma with extracorporeal photopheresis induces Fas-ligand expression on treated T cells,but does not suppress the expression of co-stimulatory molecules on monocytes

Following extracorporeal photopheresis (ECP), lymphocytes become apoptotic and upregulate class I MHC antigenic peptides. Conversely, ECP treated monocytes demonstrate activation markers and have an increased avidity for the phagocytosis of apoptotic T cells. Processing of apoptotic T cells by monocytes, following ECP, is thought to induce an immunomodulatory response, which targets untreated, but clonal T cells. Recently we detected apoptotic lymphocytes immediately post ECP. Although enhanced CD95 (Fas) expression has been observed 24 h post ECP, CD95 and Fas-ligand (Fas-L) expression have not been determined at this very early apoptotic stage. Exposure of monocytes to UV has previously suppressed expression of the co-stimulatory molecules required for the presentation of processed antigens to T cells. Our data demonstrate no increase in CD95 or Fas-L expression on T cells tested immediately following ECP. However, the number of T cells expressing Fas-L significantly increased 24 h post ECP (P<0.005). The expression of the co-stimulatory molecules, CD54, CD80 and CD86, remained unaltered on monocytes treated by ECP. Although the mechanism responsible for early induction of lymphocyte apoptosis remains unclear, the later apoptosis involves Fas-L expression. The maintenance of co-stimulatory molecules, on treated monocytes, indicates that they retain the ability to induce an immunomodulatory response.     

Copper(II) chloride complexes with multimodal ligands based on the cyclotriphosphazene platform

The reaction of hexakis(2-pyridyloxy)cyclotriphosphazene (L) and hexakis(4-methyl-2-pyridyloxy)cyclotriphosphazene (MeL) with copper(ii) chloride afford the complexes [CuLCl(2)], [(CuCl(2))(2)(MeL)], [CuLCl]PF(6) and [Cu(MeL)Cl]PF(6). The single-crystal X-ray structure of [CuLCl(2)] shows the copper ion to be in a square based pyramidal distorted trigonal bipyramidal (SBPDTBP) environment (tau= 0.47) with L acting as a kappa(3)N donor, coordinating via the nitrogen atoms from two non-geminal pyridyloxy pendant arms, a nitrogen atom in the phosphazene ring and two chloride ions. In the dimetallic complex, [(CuCl(2))(2)(MeL)], the geometry about both (symmetry related) copper(ii) centres is also SBPDTBP (tau= 0.57) with a 'N(3)Cl(2)' donor set. In the monocation of [CuLCl]PF(6), L acts as a kappa(5)N donor, bonding to the copper(ii) centre through the nitrogen atoms of four pyridyloxy pendant arms, a phosphazene ring nitrogen atom and a chloride ion to give an elongated rhombic octahedral coordination sphere. The phosphazene ring atoms remain virtually coplanar in all three structures as a consequence of the phenoxy-hinge, which links the pyridine pendant donors to the cyclotriphosphazene platform, allowing the formation of six-membered chelate rings. The spectroscopic (mass spectral, EPR and electronic) and magnetic properties of the complexes are discussed. The EPR and variable temperature magnetic susceptibility results for the dicopper complex, [(CuCl(2))(2)(MeL)], point to a very weak electronic interaction between the metal atoms.     

HRTEM image simulations for the study of ultrathin gate oxides.

We have performed high resolution transmission electron microscope (HRTEM) image simulations to qualitatively assess the visibility of various structural defects in ultrathin gate oxides of MOSFET devices, and to quantitatively examine the accuracy of HRTEM in performing gate oxide metrology. Structural models contained crystalline defects embedded in an amorphous 16-A-thick gate oxide. Simulated images were calculated for structures viewed in cross section. Defect visibility was assessed as a function of specimen thickness and defect morphology, composition, size, and orientation. Defect morphologies included asperities lying on the substrate surface, as well as "bridging" defects connecting the substrate to the gate electrode. Measurements of gate oxide thickness extracted from simulated images were compared to actual dimensions in the model structure to assess TEM accuracy for metrology. The effects of specimen tilt, specimen thickness, objective lens defocus, and coefficient of spherical aberration (Cs) on measurement accuracy were explored for nominal 10-A gate oxide thickness. Results from this work suggest that accurate metrology of ultrathin gate oxides (i.e., limited to several percent error) is feasible on a consistent basis only by using a Cs-corrected microscope. However, fundamental limitations remain for characterizing defects in gate oxides using HRTEM, even with the new generation of Cs-corrected microscopes.     

Acid digestion of geological and environmental samples using open-vessel focused microwave digestion

The application of open vessel focused microwave acid digestion is described for the preparation of geological and environmental samples for analysis using inductively coupled plasma-mass spectrometry (ICP-MS). The method is compared to conventional closed-vessel high pressure methods which are limited in the use of HF to break down silicates. Open-vessel acid digestion more conveniently enables the use of HF to remove Si from geological and plant samples as volatile SiF4, as well as evaporation-to-dryness and sequential acid addition during the procedure. Rock reference materials (G-2 granite, MRG-1 gabbros, SY-2 syenite, JA-1 andesite, and JB-2 and SRM-688 basalts) and plant reference materials (BCR and IAEA lichens, peach leaves, apple leaves, Durham wheat flour, and pine needles) were digested with results comparable to conventional hotplate digestion. The microwave digestion method gave poor results for granitic samples containing refractory minerals, however fusion was the preferred method of preparation for these samples. Sample preparation time was reduced from several days, using conventional hotplate digestion method, to one hour per sample using our microwave method.