Searching for precursors to metal-metal bonded dipalladium species: a study of Pd2(4+) complexes

Reactions of Pd3(OAc)6 with lithium salts of mononegative bidentate N,N-ligands, L, of various types, such as formamidinates, benzamidinates, triazinates, and guanidinates, were investigated in a search for ways to obtain Pd2(4+) compounds that could serve as precursors to paddlewheel complexes with a metal-metal bond and a Pd2(5+) core. It was found that the reactions are complex and that either square planar mononuclear or dinuclear species may be formed depending on the reaction conditions or the method of isolation. For Pd2L4 compounds, alpha and beta isomers were sometimes obtainable. In the alpha isomer, all N,N-ligands serve as bridges, whereas in the beta isomer, two ligands bridge the Pd2(4+) unit and each of the other two chelate to a metal atom. Electrochemistry shows that the paddlewheel compounds Pd2(TolNC(H)NTol)4, Pd2(PhNC(Ph)NPh)4, and Pd2(PhNC(Ph)NPh)3(OAc) and the orthometalated complex cis-Pd2[eta2-C6H4NC(Ph)N(H)Ph]2(mu-OAc)2 have reversible oxidation waves between 0.70 and 0.92 V vs Ag/AgCl, which makes them good candidates for chemical oxidation.     

Modifying electronic communication in dimolybdenum units by linkage isomers of bridged oxamidate dianions

Reactions of Mo(2)(O(2)CCH(3))(DAniF)(3), DAniF = N,N'-di-p-anisylformamidinate, with oxamidate dianions [ArNC(O)C(O)NAr](2-), Ar = C(6)H(5) and p-anisyl, give pairs of isomeric compounds where the [Mo(2)] units are bridged by the oxamidate anions. For the alpha isomers, the C-C unit of the dianion is nearly perpendicular to the Mo-Mo bonds, and these are essentially perpendicular to each other. For the beta isomers, the corresponding C-C unit and the Mo-Mo bonds are essentially parallel to each other. Each type of isomer is stable in solution. The electronic communication as measured by the DeltaE(1/2) for the oxidation of each of the Mo(2) units is significantly better for the beta isomers. This is supported also by the appearance of what is conventionally called an intervalence charge-transfer band in the near infrared region upon oxidation of the beta isomers but not the alpha isomers. Molecular mechanics and DFT calculations help explain the relative conformations in the alpha isomers and the relative energy differences between the alpha and beta isomers.     

Trapping tetramethoxyzincate and -cobaltate(II) between Mo24+ units

Two compounds of a new type, [Mo(2)](CH(3)O)(2)M(CH(3)O)(2)[Mo(2)] where [Mo(2)] is an abbreviation for Mo(2)[(p-MeOC(6)H(4))NCHN(p-MeOC(6)H(4))](3) and M = Zn (1) and Co (2), are reported. Discrete [M(OR)(4)](2-) ions, either as such or in the mu(2),eta(4) role, have not heretofore been described. In these compounds they have distorted tetrahedral structures and bridge two [Mo(2)] groups in much the same way as did SO(4)(2-), MoO(4)(2-), and WO(4)(2-) ions in other recently reported compounds (Cotton, F. A.; Donahue, J. P.; Murillo, C. A. Inorg. Chem. 2001, 40, 2229). The (1)H NMR spectrum of 1 and the visible spectrum and magnetic properties of 2 are consistent with these structures. The M(OCH(3))(4) bridges are moderately effective in coupling the two [Mo(2)] redox centers. Compounds 1 and 2 may also be viewed as having Zn(II) and Co(II) centers tetrahedrally coordinated by the bidentate ligand [Mo(2)[(p-MeOC(6)H(4))NCHN(p-MeOC(6)H(4))](3)(OMe)(2)](-). From that point of view they may be compared with Zn(DPM)(2) and Co(DPM)(2) (3), where DPM is the anion of dipivaloylmethane. For purposes of comparison, 3 has been fully characterized structurally, spectroscopically, and magnetically. Close analogies between 2 and 3 are shown to exist.     

Dinuclear and heteropolynuclear complexes containing Mo2(4+) units

The quadruply bonded compound Mo2(DpyF)4 (1), where DpyF- is the anion of N,N'-di(2-pyridyl)formamidine, has been prepared by ligand substitution reactions of Mo2(OOCCF3)4 and either the neutral ligand, HDpyF, at ambient temperature or its lithium salt, LiDpyF, under refluxing conditions. An X-ray structural analysis shows that 1 has a paddlewheel structure with a [symbol: see text] distance of 2.1108(6) A. Reaction of 1 with CoCl2 in methanol produces the paramagnetic compound [Mo2Co(DpyF)4][CoCl4].2MeOH (2). The Co(II) atom in the cation [Mo2Co(DpyF)4]2+ resides on a low-spin hexacoordinate environment (S = 1/2) with a Co...Mo separation of 2.979(6) A, suggesting there is no direct bonding interaction between the Co and Mo atoms. The Mo-Mo distance of 2.1096(5) A is similar to that in 1. Reaction of 1 and CuCl in methanol yields [Mo2Cu4(DpyF)4Cl2][CuCl2]2.2MeOHxEt2O (3). In the cation there are two copper atoms on each side of the Mo2 core. Each is coordinated to two pyridyl nitrogen atoms of the cis DpyF- ligands and loosely bridged to the other by a chloride ion. As a result, the Cu(I) atoms are not aligned with the Mo2 unit. The Cu to Mo separations are in the range 3.003(1)-3.015(1) A, and the Mo-Mo distance of 2.127(1) A is comparable to those in 1 and 2.     

Non-trivial behavior of palladium(II) acetate

Reaction of activated palladium metal with a HNO3/acetic acid mixture produces both orange Pd3(OAc)6, 1, and purple Pd3(OAc)5(NO2), 2. Compound has a trinuclear structure derived from that of the well-known triangular complex 1 in which one acetate group has been replaced by a nitrite group which is bonded to one palladium atom by the nitrogen atom and to another Pd atom using one of the oxygen atoms. Highly pure 1 can be made by continuous removal of the nitric oxides from the reaction mixture using a flow of N2. 1H NMR spectra of solutions of 1 in CDCl3 and C6D6 show several signals of various intensities when a small amount of water is present in the deuterated solvents but only one signal when the solvents are thoroughly dried. These results are consistent with the occurrence of one or more hydrolysis processes when the solvents contain water and suggest that hypotheses about various [Pd(OAc)2]n aggregates that have previously been brought forward in the literature to explain the complexity of the spectrum of 1 are unnecessary, especially for nonpolar solvents. Compound 2 does not hydrolyze, and in wet or dried solvents shows a 1H NMR spectrum that consists of five equal-intensity signals due to the five nonequivalent acetate groups.     

An efficient synthesis of acetylide/trimetal/acetylide molecular wires

Efficient syntheses are reported for incorporating trimetal units of the type M(3)(dpa)(4)(2+) (M = Cr, Co, Ni, and dpa = 2,2'-dipyridylamide) into polyalkynyl assemblies to give the prototypical bis-phenylacetylide complexes M(3)(dpa)(4)(CCPh)(2). Reactions of M(3)(dpa)(4)Cl(2) with LiCCPh have led only to mixtures of products which cocrystallize forming materials of the composition M(3)(dpa)(4)(CCPh)(x)()Cl(2)(-)(x)(). Here we report that acetonitrile complexes [M(3)(dpa)(4)(NCCH(3))(2)](PF(6))(2) react cleanly with LiCCPh in MeCN to afford the desired target molecules in 40-60% yield and in excellent purity. Isolation of the mixed ligand complex [Co(3)(dpa)(4)(NCCH(3))(CCPh)]PF(6) has been accomplished, which suggests that these reactions are stepwise and that it will be possible to synthesize mixed acetylide complexes (i.e., M(3)(dpa)(4)(CCR)(CCR')) via this method.     

SURFACE-ENHANCED RESONANCE RAMAN SCATTERING SPECTROSCOPY AS A SURFACE TOPOGRAPHY PROBE IN PLANT PHOTOSYNTHETIC MEMBRANES

Strong resonance Raman (RR) and surface-enhanced resonance Raman scattering (SERRS) signals from carotenoids were detected from thylakoid (stromal-side out) vesicles and inside-out (lumenal-side out) vesicles isolated from spinach chloroplasts. The intensity of the signals from both types of membranes was comparable, indicating that plant carotenoids are exposed on or close to both surfaces or sides of the thylakoid membrane. This is in contrast to previous studies with bacterial photosynthetic membranes (Picorel et al., 1988, J. Biol. Chem. 263 , 4374–4380; and 1990, Biochemistry 29 , 707–712) that show carotenoids selectively located on the cytoplasmic side. In addition_; strong RR and SERRS signals were detected from stacked and unstacked photosystem-II-enriched membrane fragments, demonstrating that carotenoids are also exposed on both surfaces of the appressed region of the thylakoid membrane. Antibodies against the photosystem (PS) II extrinsic proteins blocked SERRS signals from stacked PS II membrane fragments, but only partially affected the SERRS signals from unstacked membranes. The results indicate that these antibodies, which preferentially cover the surface of the original lumenalside of the appressed region, act as spacers between the membrane and SERRS electrode surfaces. The original stromal-side of the appressed region is unaffected. These findings verify the distance sensitivity of the SERRS technique and underscore the above conclusion about the location of carotenoids in the appressed regions. Finally, SERRS signals are sensitive to membrane aging and storage temperature; caution is suggested to those applying SERRS spectroscopy to intact membrane systems.     

New Hexazirconium Clusters Containing Hydrogen Atoms

Reduction of ZrBr₄ with HSnBu₃ yielded a blue solid. When this blue solid was treated with PMe₃, a hexanuelear cluster [Zr₆Br₁₄H₄( PMe₃)₄] (2) was isolated. Reaction of the blue solid with [PPh₄]Br in CH₂Cl₂ resulted in the formation of a paramagnetic and unstable cluster anion, [Zr₆Br₁₈H₅]^2– (3), which disproportionated to form a new cluster anion, [Zr₆Br₁₈H₅]^3– (4) and some Zr(IV) species. Compounds containing 4 can also be obtained from reaction of the blue solid with Br^– in MeCN. Reduction of ZrCl₄ with HsnBu₃ gave a red–brown solid, and [Zr₆Cl₁₄H₄(AsMe₃)₄] (9) and [Zr₅Cl₁₂H₄(AsMe₃)₅](8) were obtained by reaction of the red–brown solid with AsMe₃. No cluster compounds containing amine ligands were obtained in the reaction of the red–brown solid with amines; only compounds containing the [Zr₆Cl₁₈ H₅]^3– anion and ammonium cations were isolated. Altogether ten products were characterized by single crystal X-ray diffraction and where possible, by ¹H NMR studies.     

Reactions of TIN(II) halides with compounds containing a transition metalcarbon σ-bond

Tin(II) chloride inserts into the ironcarbon σ-bond in MeFe(CO)₂Cp (Cp = cyclopentadienyl), in refluxing methanol or THF, to give MeClSnFe(CO)₂- Cp and traces of Cl₃SnFe(CO)₂Cp, but, with EtFe(CO)₂Cp, a mixture of the insertion product, Cl₃SnFe(CO)₂Cp, and Cl₂Sn[Fe(CO)₂Cp]₂ is formed. Insertion of tin(II) chloride was not observed for MeMo(CO)₃Cp and MeMn(CO)₅; in these reactions, and in those between tin(II)_bromide and MeFe(CO)₂Cp, EtFe(CO)₂Cp and Memo(CO)₃Cp, mixtures of halo—metal carbonyls and halotin—metal carbonyls result.