Speciation of metal(loid)s in environmental samples by X-ray absorption spectroscopy: A critical review

Element specificity is one of the key factors underlying the widespread use and acceptance of X-ray absorption spectroscopy (XAS) as a research tool in the environmental and geo-sciences. Independent of physical state (solid, liquid, gas), XAS analyses of metal(loid)s in complex environmental matrices over the past two decades have provided important information about speciation at environmentally relevant interfaces (e.g. solid–liquid) as well as in different media: plant tissues, rhizosphere, soils, sediments, ores, mineral process tailings, etc. Limited sample preparation requirements, the concomitant ability to preserve original physical and chemical states, and independence from crystallinity add to the advantages of using XAS in environmental investigations. Interpretations of XAS data are founded on sound physical and statistical models that can be applied to spectra of reference materials and mixed phases, respectively. For spectra collected directly from environmental matrices, abstract factor analysis and linear combination fitting provide the means to ascertain chemical, bonding, and crystalline states, and to extract quantitative information about their distribution within the data set. Through advances in optics, detectors, and data processing, X-ray fluorescence microprobes capable of focusing X-rays to micro- and nano-meter size have become competitive research venues for resolving the complexity of environmental samples at their inherent scale. The application of μ-XANES imaging, a new combinatorial approach of X-ray fluorescence spectrometry and XANES spectroscopy at the micron scale, is one of the latest technological advances allowing for lateral resolution of chemical states over wide areas due to vastly improved data processing and detector technology.     

Evaluations of the BET, I-point, and α-plot procedures for the routine determination of external specific surface areas of highly dispersed and porous silicas

Nitrogen adsorption isotherms of silicas and other oxidic materials are distorted by the presence of micropore adsorption and capillary condensation. This distortion affects the determination of the specific area of the material, depending on the chosen calculation procedure. Correction of the initial (total) isotherm for micropore capacity decreases or eliminates this source of error to give a useful estimate of the external surface area. In the present work, 26 silica-based adsorbent materials were studied to obtain total and external specific surface areas by the Brunauer-Emmett-Teller (BET), I-point, and α-plot procedures, using the micropore capacities from the α-plots to obtain the corrected (external) isotherms. Errors in the specific surface areas due to the presence of micropores are given by the equation ΔsA = 3.267 (m(2)/cm(3) STP) sV(mic), where sA is the specific surface area in m(2)/g and sV(mic) is the micropore capacity in cm(3) STP/g. A consistent set of conversion factors was obtained by which the external specific surface area obtained using one of these procedures can be converted, with part-per-thousand precision, to either of the others. Although the I-point procedure presents the advantage of not requiring a defined p/p(0) range, the α-plot procedure is recommended for routine determinations of external specific areas of silicas and other oxidic materials, except for cases in which the shapes of the adsorption isotherms of the sample and the reference differ significantly from one another in the p/p(0) range used for the determination.     

Biosynthesis of iron and silver nanoparticles at room temperature using aqueous sorghum bran extracts

Iron and silver nanoparticles were synthesized using a rapid, single step, and completely green biosynthetic method employing aqueous sorghum extracts as both the reducing and capping agent. Silver ions were rapidly reduced by the aqueous sorghum bran extracts, leading to the formation of highly crystalline silver nanoparticles with an average diameter of 10 nm. The diffraction peaks were indexed to the face-centered cubic (fcc) phase of silver. The absorption spectra of colloidal silver nanoparticles showed a surface plasmon resonance (SPR) peak centered at a wavelength of 390 nm. Amorphous iron nanoparticles with an average diameter of 50 nm were formed instantaneously under ambient conditions. The reactivity of iron nanoparticles was tested by the H(2)O(2)-catalyzed degradation of bromothymol blue as a model organic contaminant.     

Ab initio potential energy surface and quantum dynamics for the H + CH4 → H2 + CH3 reaction

A new full-dimensional potential energy surface for the title reaction has been constructed using the modified Shepard interpolation scheme. Energies and derivatives were calculated using the UCCSD(T) method with aug-cc-pVTZ and 6-311++G(3df,2pd) basis sets, respectively. A total number of 30,000 data points were selected from a huge number of molecular configurations sampled by trajectory method. Quantum dynamical calculations showed that the potential energy surface is well converged for the number of data points for collision energy up to 2.5 eV. Total reaction probabilities and integral cross sections were calculated on the present surface, as well as on the ZBB3 and EG-2008 surfaces for the title reaction. Satisfactory agreements were achieved between the present and the ZBB3 potential energy surfaces, indicating we are approaching the final stage to obtain a global potential energy surface of quantitative accuracy for this benchmark polyatomic system. Our calculations also showed that the EG-2008 surface is less accurate than the present and ZBB3 surfaces, particularly in high energy region.     

On the reactivity of mononuclear iron(V)oxo complexes

Ferric tetraamido macrocyclic ligand (TAML)-based catalysts [Fe{C(6)H(4)-1,2-(NCOCMe(2)NCO)(2)CR(2)}(OH(2))]PPh(4) [1; R = Me (a), Et (b)] are oxidized by m-chloroperoxybenzoic acid at -40 °C in acetonitrile containing trace water in two steps to form Fe(V)oxo complexes (2a,b). These uniquely authenticated Fe(V)(O) species comproportionate with the Fe(III) starting materials 1a,b to give μ-oxo-(Fe(IV))(2) dimers. The comproportionation of 1a-2a is faster and that of 1b-2b is slower than the oxidation by 2a,b of sulfides (p-XC(6)H(4)SMe) to sulfoxides, highlighting a remarkable steric control of the dynamics. Sulfide oxidation follows saturation kinetics in [p-XC(6)H(4)SMe] with electron-rich substrates (X = Me, H), but changes to linear kinetics with electron-poor substrates (X = Cl, CN) as the sulfide affinity for iron decreases. As the sulfide becomes less basic, the Fe(IV)/Fe(III) ratio at the end of reaction for 2b suggests a decreasing contribution of concerted oxygen-atom transfer (Fe(V) → Fe(III)) concomitant with increasing electron transfer oxidation (Fe(V) → Fe(IV)). Fe(V) is more reactive toward PhSMe than Fe(IV) by 4 orders of magnitude, a gap even larger than that known for peroxidase Compounds I and II. The findings reinforce prior work typecasting TAML activators as faithful peroxidase mimics.     

Synthesis and clathrates of oligomeric 2-O-naphthoide macrocycles

New macrocyclic O-naphthoides 4-6 were synthesized from dehydration reactions of 3-hydroxy- and 7-tert-butyl-3-hydroxy-2-naphthoic acids, respectively. Their X-ray structures were determined and their clathrate inclusion properties were investigated. Hexamer 6 formed an inclusion clathrate with four chloroform molecules. The trimer 5, by analogy with tri-o-thymotide, was studied for its potential optical resolution effects.     

A thin film triode type carbon nanotube field emission cathode

The field electron emission of carbon nanotubes has been heavily studied over the past two decades for various applications, such as in display technologies, microwave amplifiers, and spacecraft propulsion. However, a commercializable lightweight and internally gated electron source has yet to be realized. This work presents the fabrication and testing of a novel internally gated carbon nanotube field electron emitter. Several specific methods are used to prevent electrical shorting of the gate layer, a common failure for internally gated devices. A unique design is explored where the etch pits extend into the silicon substrate and isotropic etching is used to create a lateral buffer zone between the gate and carbon nanotubes. Carbon nanotubes are self-aligned to and within 10 microns from the gate, which creates large electric fields at low potential inputs. Initial tests confirm high field emission performance with an anode current density (based on total area of the device) of 293 μA?cm^?2 and a gate current density of 1.68 mA?cm^?2 at 250 V.     

The localization of low- and high-frequency vibrotactile stimuli

Four experiments were conducted to determine whether spatial localization on the skin varied in acuity as a function of frequency of vibratory stimulation. The glabrous skin of the palm over the hypothenar eminence was selected as the site for stimulation by two frequencies, one at 25 Hz to stimulate non-Pacinian receptors, and one at 250 Hz to excite Pacinian receptors. Because the Pacinian receptors have larger receptive fields than the non-Pacinians, it was thought that the subjects' ability to localize would be poorer when the Pacinians were the class of receptor stimulated. In addition to frequency of vibration, the presence of a surround, the site of stimulation, the separation of the stimulator pair used in the 2AFC method, and the use of an impulse stimulus were all conditions varied to determine whether a simple direct correlation exists between receptor category and spatial acuity for vibratory stimuli. A significant difference in acuity was found as a function of vibration frequency at a proximal locus on the palm, but this vanished at a distal locus. The results have been interpreted to suggest that receptor density and its gradient across the skin areas involved may be as important as receptor type in the determination of spatial acuity.     

EPR PERSISTENCE MEASUREMENTS OF UV-INDUCED MELANIN FREE RADICALS IN WHOLE SKIN

Electron paramagnetic resonance is used to detect the formation of free radicals caused by exposure to ultraviolet radiation in chemically untreated rabbit skin. A fast jump in EPR signal level, occurring over a few seconds, is observed immediately after a skin sample is exposed to UV. This is followed by a slower increase toward an elevated steady-state signal over a period of hours as the skin is continuously exposed to a UV light source. Upon cessation of UV light exposure, EPR signal levels undergo an abrupt drop followed by a slower decay toward natural levels. Elevated free radical concentrations following UV exposure are found to persist for several hours in whole skin. These results are consistent with time-resolved EPR measurements of photoinduced radicals in various natural melanins.     

Experimental and theoretical study on the radiation of gases containing dust particles

The attenuation of thermal radiation within a dilute cloud of pulverised coal and ash is investigated experimentally and theoretically, for different ranges of particle size. An empirical expression is developed for obtaining the absorptivity and emissivity of a coal/ash cloud. A new nomogram is also presented on the basis of this expression.