O(2) symmetric connections in an SU(2) Yang-Mills theory

The general O(2) symmetric Yang-Mills equations are derived. An ansatz for O(2) symmetric merons is presented and it is shown that any connection in this ansatz will have SU(2) topological charge density which is a sum of delta functions at points in a plane with weights ± 1/2. It is shown that any connection in this ansatz will beC away from these points.National Science Foundation Pre-doctoral FellowSupported in part by the National Science Foundation under Grant PHY 77-18762     

Critical Heat Flux for Downward Facing Boiling on a Coated Hemispherical Surface

An experimental study was performed to investigate the effect of surface coating on the critical heat flux for downward facing boiling on the outer surface of a hemispherical vessel. Steady-state boiling experiments were conducted in the subscale boundary layer boiling (SBLB) facility using test vessels with metallic microporous coatings to obtain the local boiling curves and the local critical heat flux (CHF) limits. Similar heat transfer performance was observed for microporous aluminum and microporous copper coatings. When compared to the corresponding data without coatings, the boiling curves for the coated vessels were found to shift upward and to the right. This meant that the CHF limit was higher with surface coating and that the minimum film boiling temperatures were located at higher wall superheats. In particular, the microporous coatings were found to enhance the local CHF values appreciably at all angular locations explored in the experiments. Results of the present study showed that the microporous aluminum coating was very durable. Even after many cycles of steady state boiling, the vessel coating remained rather intact, with no apparent changes in color or structure. Although similar heat transfer performance was observed for microporous copper coatings, the latter were found to be much less durable and tended to degrade after several cycles of boiling.     

Liquid crystal mixtures for potential infrared applications

Liquid crystals (LCs) with diazo linkages have high dielectric and optical anisotropy. Two newly synthesized liquid crystalline compounds were dissolved in room temperature LC hosts, E7 and PTTP-24/36, to assess their properties. It was found that these mixtures have higher birefringence, larger dielectric anisotropy, and better elastic properties than the hosts. Satisfactory viscoelastic coefficients were also obtained for these mixtures, showing that they are promising LC materials for applications in the near IR region.     

Summary of ISO/TC 201 Standard: ISO 22415—Surface chemical analysis—Secondary ion mass spectrometry—Method for determining yield volume in argon cluster sputter depth profiling of organic materials

The International Standard ISO 22415 provides methods to measure sputtering yield volumes of organic test materials using argon cluster ions. The test materials should consist of thin films of known thicknesses between 50 and 1000 nm. The format of the test materials, the measurement of sputtering ion dose, sputtered depth, and reporting requirements for sputtering yield volumes are described.     

Determination of a novel antifibrotic small molecule GDC‐3280 in human plasma and urine by liquid chromatography tandem mass spectrometry to support its first‐in‐human clinical trial

A specific and robust LC–MS/MS method was developed and validated for the quantitative determination of GDC‐3280 in human plasma and urine. The nonspecific binding associated with urine samples was overcome by the addition of CHAPS. The sample volume was 25 μL for either matrix, and supported liquid extraction was employed for analyte extraction. d6‐GDC‐3280 was used as the internal standard. Linear standard curves (R² > 0.9956) were established from 5.00 to 5000 ng/mL in both matrices with quantitation extended to 50,000 ng/mL through dilution. In plasma matrix, the precision (RSD) ranged from 1.5 to 9.9% (intra‐run) and from 2.4 to 7.2% (inter‐run); the accuracy (RE) ranged from 96.1 to 107% (intra‐run) and from 96.7 to 104% (inter‐run). Similarly, in urine the precision was 1.5–6.2% (intra‐run) and 1.9–6.1% (inter‐run); the accuracy was 83.1–99.3% (intra‐run) and 87.1–98.3% (inter‐run). Good recovery (>94%) and negligible matrix effect were achieved in both matrices. Long‐term matrix stability was established for at least 703 days in plasma and 477 days in urine. Bench‐top stability of 25 h and five freeze–thaw cycles were also confirmed in both matrices. The method was successfully implemented in GDC‐3280's first‐in‐human trial for assessing its pharmacokinetic profiles.     

Synthesis of symmetrical and unsymmetrical diindolylmethanes via acid-catalysed electrophilic substitution reactions

A range of activated indole-2-carboxylate derivatives was prepared via the Hemetsberger indole synthesis. Vilsmeier formylation was explored to establish regioselectivity and to prepare a range of new indole carbaldehydes. The indole aldehydes were reduced to the corresponding hydroxymethylindoles in good yields by the use of sodium borohydride in THF. Symmetrical 4,4′-, 6,6′- and 7,7′-diindolylmethanes were prepared via the acid-catalysed reaction of the corresponding hydroxymethylindoles. Furthermore, the treatment of methyl 4-hydroxymethyl-5,6-dimethoxyindole-2-carboxylate and a range of methyl indole esters with acetic acid led to the formation of unsymmetrical 4,6′- and 4,7′-dindolylmethanes.     

Bioprinting of Collagen: Considerations,Potentials, and Applications

Collagen is the most abundant extracellular matrix protein that is widely used in tissue engineering (TE). There is little research done on printing pure collagen. To understand the bottlenecks in printing pure collagen, it is imperative to understand collagen from a bottom‐up approach. Here it is aimed to provide a comprehensive overview of collagen printing, where collagen assembly in vivo and the various sources of collagen available for TE application are first understood. Next, the current printing technologies and strategy for printing collagen‐based materials are highlighted. Considerations and key challenges faced in collagen printing are identified. Finally, the key research areas that would enhance the functionality of printed collagen are presented.     

Sulphur dioxide insertion into tin―carbon bonds: solvent effects and the nature of the transition state

Data describing the insertion of sulphur dioxide into the carbon―tin bond of a range of substituted phenyltrimethyltin compounds in methanol and benzene solvents have been reconsidered. The reaction in methanol is cleanly second order, but the reaction in benzene has both a second‐order and third‐order component, the latter ascribable to an initial equilibrium formation of a SO₂ complex with the phenyl ring followed by the insertion of a second SO₂ molecule into the carbon–tin bond. Molecular orbital calculations have identified the transition states (TS) and the favoured reaction pathways for the second‐order and third‐order reaction pathways in benzene. The effects of solvents on TS and enthalpies of reaction have also been examined. New insights into the types of TS involved in electrophilic substitution reactions are revealed. Copyright © 2013 John Wiley & Sons, Ltd.