A comparison of a theoretical model for quasi-statically and dynamically induced environmental vibration from trains with measurements

This paper presents comparisons between a theoretical ground vibration model and measured data at three sites. The model, which is briefly outlined here, encompasses both the quasi-static and dynamic mechanisms of excitation. The vertical dynamics of a number of vehicles travelling at a constant speed on an infinite track are coupled to a semi-analytical model for a three-dimensional layered ground. This model is also used to demonstrate the roles of the two components of vibration at different frequencies and for train speeds below and above the lowest ground wave speed. It is found that, in most practical cases, the dynamic component gives rise to the higher level of vibration.     

Accurate Gain Flattening Filters Manufactured by Optical Compensation Monitoring Method

GFFs with less than 0.4 dB peak-to-peak error functions are routinely fabricated using commercially available coating machines by utilizing the natural error compensation mechanism of wavelength variable turning point optical monitoring method.     

Microtraps and Atom Chips: Toolboxes for Cold Atom Physics

Magnetic microtraps and Atom Chips are safe, small-scale, reliable and flexible tools to prepare ultra-cold and degenerate atom clouds as sources for various atom-optical experiments. We present an overview of the possibilities of the devices and indicate how a microtrap can be used to prepare and launch a Bose-Einstein condensate for use in an atom clock or an interferometer.     

Conductance of a multiterminal ballistic wire

JETP Letters - An experimental study of the two-, three-, and four-terminal resistance of a ballistic wire is carried out. The wire is fabricated on the basis of high-mobility 2D electron gas in an...     

Sterically stabilized emulsion polymerization of styrene: Pseudo‐semicontinuous approach

The sterically stabilized emulsion polymerization of styrene initiated by a water‐soluble initiator at different temperatures has been investigated. The rate of polymerization (R_p) versus conversion curve shows the two non‐stationary‐rate intervals typical for the polymerization proceeding under non‐stationary‐state conditions. The shape of the R_p versus conversion curve results from two opposite effects—the increased number of particles and the decreased monomer concentration at reaction loci as the polymerization advances. At elevated temperatures the monomer emulsion equilibrates to a two‐phase or three‐phase system. The upper phase is transparent (monomer), and the lower one is blue colored, typical for microemulsion. After stirring such a multiphase system and initiation of polymerization, the initial coarse polymer emulsion was formed. The average size of monomer/polymer particles strongly decreased up to about 40% conversion and then leveled off. The initial large particles are assumed to be highly monomer‐swollen particles formed by the heteroagglomeration of unstable polymer particles and monomer droplets. The size of the “highly monomer” swollen particles continuously decreases with conversion, and they merge with the growing particles at about 40–50% conversion. The monomer droplets and/or large highly monomer‐swollen polymer particles also serve as a reservoir of monomer and emulsifier. The continuous release of nonionic (hydrophobic) emulsifier from the monomer phase increases the colloidal stability of primary particles and the number of polymer particles, that is, the particle nucleation is shifted to the higher conversion region. Variations of the square and cube of the mean droplet radius with aging time indicate that neither the coalescence nor the Ostwald ripening is the main driving force for the droplet instability. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 804–820, 2003     

WITCH: A Penning Trap Retardation Spectrometer Combination for Precision Studies of the Weak Interaction

We present data from three seasons of experimental field work designed to recreate ancient Andean coastal ceramic firing techniques. Based on the recent discovery of two different archaeological ceramic production sites in the La Leche river valley of northern coastal Peru, the opportunity arose to apply Mössbauer spectroscopy and other analytical methods to reconstruct ancient firing procedures. Two sets of firings took place in 1993 and 1997 in Batán Grande using a partially restored Formative kiln from about 800 BC, local hardwood and cow dung as fuel. A third experiment followed in 2000 after the discovery of a Middle Sicán ceramics workshop in use between ca. AD 950 and 1050 at Huaca Sialupe, where an exact replica of an ancient kiln was built from local clay, and fired with local wood and cow dung. Additionally, inverted urns found at Huaca Sialupe were tested for their potential use as furnaces for metal working. Mössbauer spectroscopy was used to compare the physical and chemical state of specimens produced in the field experiments with ancient ceramics and with specimens produced in controlled laboratory experiments.     

Enhancement of the emission yield of silicon nanocrystals in silica due to surface passivation

The ability of surface passivation to enhance the photoluminescence (PL) emission of Si nanocrystals in SiO₂ has been investigated. Silicon precipitation in implanted samples takes place in a time scale of few minutes at 1100°C. For longer annealing at the same temperature, the PL intensity of the Si nanocrystals increases and eventually reaches saturation, while it correlates inversely with the amount of Si dangling bonds at the Si–SiO₂ interface (P_b centers), as measured by electron spin resonance. This combined behavior is independent on the silica matrix properties, implantation profiles and annealing atmosphere and duration. The observation that the light emission enhancement is directly related to the annealing of P_b centers is confirmed by treatment in forming gas. This mild hydrogenation at much lower temperature (450°C) leads to a complete passivation of the P_b defects, increasing at the same time the PL yield and the lifetime.     

Long-Term Prediction of Creep Strain of Expanded Polystyrene

Data obtained in investigating the creep of expanded polystyrene in compression are discussed. An analysis of the results of creep tests 65–608 days long showed that the creep can be predicted for 50 years based on experiments of less duration than the 605 days indicated in EN 13163. For this purpose, it is suggested to employ a 95-fold extrapolation in time if the creep curves are described by a power function (as recommended by EN 13163) or a 50-fold extrapolation if the exponential equation proposed in the present paper is used. __________ Translated from Mekhanika Kompozitnykh Materialov, Vol. 41, No. 6, pp. 795–802, November–December, 2005.     

Dog and tricks: some mathematics for students of graphics

This paper describes how parametric cubic splines and cubicBezier curves may be used in designing a two dimensional shape.A simple aerofoil shape is designed using both methods. Themathematics is described and the shape drawn using Excel. Theeffect of varying parameters is shown in both methods.