Immobilizing a Fluorescent Dye Offers Potential to Investigate the Glass/Resin Interface

Silane coupling agents are commonly applied to glass fibers to promote fiber/resin adhesion and enhance durability in composite parts. In this study, a coupling agent multilayer on glass was doped with trace levels of the dimethylaminonitrostilbene (DMANS) fluorophore. The fluorophore was immobilized on the glass surface by tethering the molecule to a triethoxy silane coupling agent, creating the DMANS/silane coupling agent molecule (DMSCA). DMSCA was then diluted with commonly used coupling agents and grafted to a glass microscope coverslip to create a model composite interface. A 53-nm blue shift in fluorescence from the immobilized DMSCA can be followed during cure of an epoxy resin overlayer, giving this technique potential to monitor the properties of the fiber/resin interface during composite processing. Contact angle measurements on these coupling agent layers were similar in the presence or absence of the DMSCA molecule, suggesting that trace levels of the fluorescent probe did not affect the structure of the layer. The immobilized DMSCA molecule behaved similarly to the DMANS precursor in solution. Both showed longer wavelength fluorescence in more polar environments. Copyright 2000 Academic Press.     

Computational study on the existence of organic peroxy radical-water complexes (RO2.H2O)

The existence of a series of organic peroxy radical-water complexes [CH3O2.H2O (methyl peroxy); CH3CH2O2.H2O (ethyl peroxy); CH3C(O)O2.H2O (acetyl peroxy); CH3C(O)CH2O2.H2O (acetonyl peroxy); CH2(OH)O2.H2O (hydroxyl methyl peroxy); CH2(OH)CH2O2.H2O (2-hydroxy ethyl peroxy); CH2(F)O2.H2O (fluoro methyl peroxy); CH2(F)CH2O2.H2O (2-fluoro ethyl peroxy)] is evaluated using high level ab initio calculations. A wide range of binding energies is predicted for these complexes, in which the difference in binding energies can be explained by examination of the composition of the R group attached to the peroxy moiety. The general trend in binding energies has been determined to be as follows: fluorine approximately alkyl < carbonyl < alcohol. The weakest bound complex, CH3O2.H2O, is calculated to be bound by 2.3 kcal mol-1, and the strongest, the CH2(OH)O2.H2O complex, is bound by 5.1 kcal mol-1. The binding energy of the peroxy radical-water complexes which contain carbonyl and alcohol groups indicates that these complexes may perturb the kinetics and product branching ratios of reactions involving these complexes.     

Optimising reversed-phase liquid chromatographic separation of an acidic mixture on a monolithic stationary phase with the aid of response surface methodology and experimental design

An optimization strategy for the separation of an acidic mixture by employing a monolithic stationary phase is presented, with the aid of experimental design and response surface methodology (RSM). An orthogonal array design (OAD) OA(16) (2(15)) was used to choose the significant parameters for the optimization. The significant factors were optimized by using a central composite design (CCD) and the quadratic models between the dependent and the independent parameters were built. The mathematical models were tested on a number of simulated data set and had a coefficient of R(2) > 0.97 (n = 16). On applying the optimization strategy, the factor effects were visualized as three-dimensional (3D) response surfaces and contour plots. The optimal condition was achieved in less than 40 min by using the monolithic packing with the mobile phase of methanol/20 mM phosphate buffer pH 2.7 (25.5/74.5, v/v). The method showed good agreement between the experimental data and predictive value throughout the studied parameter space and were suitable for optimization studies on the monolithic stationary phase for acidic compounds.     

Methylation of Dimedone

In connection with our synthetic approach to pentacyclic triterpenes,¹ we have required substantial amounts of 2,5,5-trimethyl-1,3-cyclohexanedione (methyldimedone, 2), which is available by methylation of dimedone (1).² However, methylation may also afford the 2,2-dimethyl product 3, the methyl ether 4, and the C, O-dimethyl product 5.     

ESCA study of the surface photo-oxidation of some non-aromatic polymers

Changes in the surface composition and structure of a number of non-aromatic polymers subjected to ultraviolet irradiation in oxygen (～ 1 atm., 20°C) have been studied. No changes in surface composition were detected after photo-oxidation of poly(vinylidene fluoride) (12 h of irradiation), low density polyethylene (7·5 h) or high density polyethylene (22·3 h). This reflects the absence in these polymers of an efficient ultraviolet absorber to initiate the photo-oxidation. The surfaces of poly(methyl methacrylate) and nylon 66 show an increase in oxygen content following irradiation. In these polymers this added oxygen is present principally as carboxyl groups and, in the case of poly(methyl methacrylate), as carbonyl groups. In nylon, there is no evidence for changes in the amide group and no oxidation of the nitrogen is detected.     

Spectral properties of selected UV-blocking and UV-transmitting covering materials with application for production of high-value crops in high tunnels

The spectral properties of selected UV-blocking and UV-transmitting covering materials were characterized by means of a UV-VIS spectroradiometer or a UV-VIS spectrometer to provide researchers and growers with guidelines for selecting suitable materials for use in studying the effects of ambient solar UV radiation on the production of tomatoes and other high-value crops in high tunnels. A survey was made of a wide range of plastic covering materials to identify commercially available products that had the desired characteristics of transmitting high levels of photosynthetically active radiation and of being stable under ambient solar UV radiation. The study was focused on evaluating films that either blocked or transmitted UV wavelengths below 380 nm to determine comparative growth, yield and market quality and to provide a tool for integrated pest management. Based on this survey, two contrasting covering materials of similar thickness (0.152 mm) and durability (4-year polyethylene), one a UV-blocking film and the other a UV-transmitting film, were selected and used to cover two high tunnels at Beltsville, MD. Spectroradiometric measurements were made to determine comparative spectral irradiance in these two high tunnels covered with these materials and under ambient solar UV radiation. Comparative measurements were also made of selected glass and plastic materials that have been used in UV exclusion studies.     

The bis-phenyltin-substituted, lone-pair-containing tungstoarsenate [(C(6)h(5)Sn)(2)as(2)W(19)O(67)(H(2)O)](8)(-)

The bis-phenyltin-substituted, lone-pair-containing tungstoarsenate [(C(6)H(5)Sn)(2)As(2)W(19)O(67)(H(2)O)](8)(-) (1) has been synthesized and characterized by multinuclear NMR, IR, and elemental analysis. Single-crystal X-ray analysis was carried out on (NH(4))(7)Na[(C(6)H(5)Sn)(2)As(2)W(19)O(67)(H(2)O)].17.5H(2)O (NH(4)(-1), which crystallizes in the monoclinic system, space group P2(1)/c, with a = 18.3127(17) A, b = 24.403(2) A, c = 22.965(2) A, beta = 106.223(2) degrees, and Z = 4. Polyanion 1 consists of two B-alpha-(As(III)W(9)O(33)) Keggin moieties linked via a WO(H(2)O) fragment and two SnC(6)H(5) groups leading to a sandwich-type structure with nominal C(2)(v) symmetry. Polyanion 1 is stable in solution as indicated by the expected 6-line pattern (4:4:4:4:2:1) in (183)W NMR and the expected (119)Sn, (13)C, and (1)H NMR spectra. Synthesis of 1 was accomplished by reaction of C(6)H(5)SnCl(3) and K(14)[As(2)W(19)O(67)(H(2)O)] in a 2:1 molar ratio in aqueous acidic medium (pH 2). In the solid-state structure of NH(4)(-1, neighboring polyanions are weakly bound via W-O-Na bonds leading to chains which interact with each other via the phenyl rings resulting in a 2-D assembly.     

Extending the Family of V4+ S=${{ 1/2 }}$ Kagome Antiferromagnets

The ionothermal synthesis, structure, and magnetic susceptibility of a novel inorganic–organic hybrid material, imidazolium vanadium(III,IV) oxyfluoride [C₃H₅N₂][V₉O₆F₂₄(H₂O)₂] (ImVOF) are presented. The structure consists of inorganic vanadium oxyfluoride slabs with kagome layers of V⁴⁺ S=${{ 1/2 }}$ ions separated by a mixed valence layer. These inorganic slabs are intercalated with imidazolium cations. Quinuclidinium (Q) and pyrazinium (Pyz) cations can also be incorporated into the hybrid structure type to give QVOF and PyzVOF analogues, respectively. The highly frustrated topology of the inorganic slabs, along with the quantum nature of the magnetism associated with V⁴⁺, means that these materials are excellent candidates to host exotic magnetic ground states, such as the highly sought quantum spin liquid. Magnetic susceptibility measurements of all samples suggest an absence of conventional long‐range magnetic order down to 2 K despite considerable antiferromagnetic exchange.