Photografting as a versatile,localizable, and single‐step surface functionalization of silica‐based monoliths dedicated to microscale separation techniques

In this work, we developed a surface functionalization way of silica monoliths with a rapid, simple, versatile, and localizable photografting step. The elaboration of a photoreactive layer at the surface of monoliths was first optimized. The functionalization with [γ‐(methacryloyloxy)propyl]trimethoxysilane at 80°C in a hydro‐organic solution containing triethylamine as catalyst allows reachng the highest density of methacrylate photoactive moieties on silica surfaces. These methacrylate reactive surfaces were subsequently photografted within few minutes with acrylate monomers bearing alkyl chains (C₁₂ and C₁₈). The photografting efficiency was determined by monitoring the retentive properties of monoliths in the RP mode. The retention factors are of the same order of magnitude as highly retentive columns obtained by modification of silica surface with long‐alkyl chain silanes or by thermal polymerization of long‐alkyl chain monomers. It was also verified that such grafting neither impaired the efficiency of the monolithic stationary phase (H_min = 6–8 μm in nano‐LC) nor its permeability (about 6 × 10^?14 m²). Further, it was also demonstrated that photografting is localizable in nonmasked defined areas. Results obtained in anion‐exchange chromatography after photopolymerization of [2‐(methacryloyloxy)ethyl]trimethylammonium chloride are presented as well to demonstrate the versatility of the developed approach.     

Synthesis and anticancer properties of gold(I) and silver(I) N-heterocyclic carbene complexes

Bis(1,3-dimethylimidazol-2-ylidene)silver(I) nitrate and bis(4,5-dichloro-1,3-dimethylimidazol-2-ylidene)silver(I) nitrate were prepared by reacting the corresponding imidazolium nitrate salts with silver oxide. Bis(1,3-dimethylimidazol-2-ylidene)gold(I) nitrate and bis(4,5-dichloro-1,3-dimethylimidazol-2-ylidene)gold(I) nitrate salts were prepared via transmetallation of their silver precursors with chloro dimethylsulfide gold. The anticancer properties were determined using NCI-H460 lung cancer cells. Efficacy was established by comparison of the gold and silver compounds with cisplatin.     

Direct zonal liquid chromatographic method for the kinetic study of actinomycin-DNA binding

The binding of an anticancer drug (actinomycin D or ACTD) to double-stranded DNA (dsDNA) was studied by means of high-performance liquid chromatography (HPLC). ACTD is an antitumor antibiotic containing one chromophore group and two pentapeptidic lactone cycles that binds dsDNA. Incubations of ACTD with DNA were performed at physiological pH. The complexed and free ligand concentrations of the mixture were quantified at 440 nm from their separation on a size-exclusion chromatographic (SEC) column using the same buffer for the elution and the sample incubation. The DNA and the ACTD-DNA complexes were eluted at the column exclusion volume while the ligand was retained on the support. An apparent binding curve was obtained by plotting the amount emerging at the exclusion column volume against that eluted at free ACTD retention volume. A dissociating effect was evidenced and the binding parameters were significantly different from those obtained at equilibrium by visible absorbance titration. The equilibrium binding parameters determined by absorption spectroscopy were used as starting data in the numerical simulations of the chromatographic process. The results showed a strong dependency of the apparent binding parameters on the reaction kinetics. Finally the comparison of the apparent binding curve obtained from the HPLC experiments and from the numerical simulations permitted an evaluation of the dissociation rate constant (kd = 0.004 s(-1)).     

Co-ordination chemistry of amino pendant arm derivatives of 1,4,7-triazacyclononane

The binding properties of 1,4,7-triazacyclononane ([9]aneN3) to metal cations can be adapted through sequential functionalisation of the secondary amines with aminoethyl or aminopropyl pendant arms to generate ligands with increasing numbers of donor atoms. The new amino functionalised pendant arm derivative of 1,4,7-triazacyclononane ([9]aneN3), L1, has been synthesised and its salt [H2L1]Cl2 characterised by X-ray diffraction. The protonation constants of the ligands L1-L4 having one, two or three aminoethyl or three aminopropyl pendant arms, respectively, on the [9]aneN3 framework, and the thermodynamic stabilities of their mononuclear complexes with CuII and ZnII have been investigated by potentiometric measurements in aqueous solutions. In order to discern the protonation sites of ligands L1-L4, 1H NMR spectroscopic studies were performed in D2O as a function of pH. While the stability constants of the CuII complexes increase on going from L1 to L2 and then decrease on going from L2 to L3 and L4, those for ZnII complexes increase from L1 to L3 and then decrease for L4. The X-ray crystal structures of the complexes [Cu(L1)(Br)]Br, [Zn(L1)(NO3)]NO3, [Cu(L2)](ClO4)2, [Ni(L2)(MeCN)](BF4)2, [Zn(L4)](BF4)2.MeCN and [Mn(L4)](NO3)2.1/2H2O have been determined. In both [Cu(L1)(Br)]Br and [Zn(L1)(NO3)]NO3 the metal ion is five co-ordinate and bound by four N-donors of the macrocyclic ligand and by one of the two counter-anions. The crystal structures of [Cu(L2)](ClO4)2 and [Ni(L2)(MeCN)](BF4)2 show the metal centre in slightly distorted square-based pyramidal and octahedral geometry, respectively, with a MeCN molecule completing the co-ordination sphere around NiII in the latter. In both [Zn(L4)](BF4)2.MeCN and [Mn(L4)](NO3)2.1/2H2O the metal ion is bound by all six N-donors of the macrocyclic ligand in a distorted octahedral geometry. Interestingly, and in agreement with the solution studies and with the marked preference of CuII to assume a square-based pyramidal geometry with these types of ligands, the reaction of L4 with one equivalent of Cu(BF4)2.4H2O in MeOH at room temperature yields a square-based pyramidal five co-ordinate CuII complex [Cu(L6)](BF4)2 where one of the three propylamino pendant arms of the starting ligand has been cleaved to give L6.     

The synthesis and electronic structure of a novel [NiS4Fe2(CO)6] radical cluster: implications for the active site of the [NiFe] hydrogenases

A novel [NiS4Fe2(CO)6]cluster (1: 'S(4)'=(CH(3)C(6)H(3)S(2))(2)(CH(2))(3)) has been synthesised, structurally characterised and has been shown to undergo a chemically reversible reduction process at -1.31 V versus Fc(+)/Fc to generate the EPR-active monoanion 1(-). Multifrequency Q-, X- and S-band EPR spectra of (61)Ni-enriched 1(-) show a well-resolved quartet hyperfine splitting in the low-field region due to the interaction with a single (61)Ni (I=3/2) nucleus. Simulations of the EPR spectra require the introduction of a single angle of non-coincidence between g(1) and A(1), and g(3) and A(3) to reproduce all of the features in the S- and X-band spectra. This behaviour provides a rare example of the detection and measurement of non-coincidence effects from frozen-solution EPR spectra without the need for single-crystal measurements, and in which the S-band experiment is sensitive to the non-coincidence. An analysis of the EPR spectra of 1(-) reveals a 24 % Ni contribution to the SOMO in 1(-), supporting a delocalisation of the spin-density across the NiFe(2) cluster. This observation is supported by IR spectroscopic results which show that the CO stretching frequencies, nu(CO), shift to lower frequency by about 70 cm(-1) when 1 is reduced to 1(-). Density functional calculations provide a framework for the interpretation of the spectroscopic properties of 1(-) and suggest that the SOMO is delocalised over the whole cluster, but with little S-centre participation. This electronic structure contrasts with that of the Ni-A, -B, -C and -L forms of [NiFe] hydrogenase in which there is considerable S participation in the SOMO.     

Synthesis, characterization and potential biomedical applications of N-succinimidyl ester functionalized, polypyrrole-coated polystyrene latex particles

N-Succinimidyl ester functionalized polypyrrole-coated polystyrene latex particles (PS_E-PPyNSE) were prepared by the in situ copolymerization of pyrrole and the active ester-functionalized pyrrole (pyrrole-NSE) in the presence of polystyrene latex particles. Polystyrene microspheres were prepared by emulsion polymerization (PS_E) leading to particles having a diameter of 450 nm. These PS_E particles were precoated with poly(N-vinylpyrrolidone) prior to the in situ copolymerization of pyrrole and pyrrole-NSE. The initial comonomer concentration fractions were 25/75, 50/50 and 75/25 for pyrrole and pyrrole-NSE, respectively. The PPy-coated PS_E particles were characterized in terms of morphology, particle size, electrophoretic mobility and chemical composition. The study of morphology by means of scanning electron microscopy showed roughening of the underlying PS_E particles owing to the addition of PPyNSE, the overlayer thickness of which was estimated to be around 7 nm. Moreover, loading PPyNSE overlayers resulted in a shift of the electrophoretic mobility from –5.31 m cm/V s to a very small but positive value (0.082–0.112 m cm/V s). X-ray photoelectron spectroscopy and IR spectroscopy permitted the detection of pyrrole-NSE repeat units at the surface indicating that pyrrole and pyrrole-NSE did indeed copolymerize. The PS_E-PPyNSE particles were further evaluated as bioadsorbents of human serum albumin used as a test protein. For this study, PS_E-PPyNSE₅₀ particles, synthesized from a comonomer feed ratio of 50/50 in pyrrole/pyrrole-NSE, were used and were shown to attach efficiently human serum albumin macromolecules with a maximum amount of 0.2 mg m^–2.

Synthesis,Spectroscopy, Crystal Structure Determination,and Quantum Chemical Calculations of BODIPY Dyes with Increasing Conformational Restriction and Concomitant Red‐Shifted Visible Absorption and Fluorescence Spectra

Starting from the conformationally unconstrained compound 3,5‐di‐(2‐bromophenoxy)‐4,4‐difluoro‐8‐(4‐methylphenyl)‐4‐bora‐3a,4a‐diaza‐s‐indacene ( 1 ), two BODIPY dyes ( 2 and 3 ) with increasingly rigid conformations were synthesized in outstanding total yields through palladium catalyzed intramolecular benzofuran formation. Restricted bond rotation of the phenoxy fragments leads to dyes 2 and 3 , which absorb and fluoresce more intensely at longer wavelengths relative to the unconstrained dye 1 . Reduction of the conformational flexibility in 2 and 3 leads to significantly higher fluorescence quantum yields compared to those of 1 . X‐ray diffraction analysis shows the progressively more extended planarity of the chromophore in line with the increasing conformational restriction in the series 1 → 2 → 3 , which explains the larger red shifts of the absorption and emission spectra. These conclusions are confirmed by quantum chemical calculations of the lowest electronic excitations in 1 , 1a , 2 , 2a , 3 and dyes of related chemical structures. The effect of the molecular structure on the visible absorption and fluorescence emission properties of 1 , 1a , 2 , 2a , 3 has been examined as a function of solvent by means of the new, generalized treatment of the solvent effect (J. Phys. Chem. B 2009 , 113, 5951–5960). Solvent polarizability is the primary factor responsible for the small solvent‐dependent shifts of the visible absorption and fluorescence emission bands of these dyes.     

Toluene steam reforming as tar model molecule produced during biomass gasification with an iron/olivine catalyst

Tar produced during biomass steam reforming is a complex mixture of single to multiple ring aromatic compounds and it is necessary to eliminate them in order to prevent any condensation-polymerisation problem. Tar steam reforming leads to additional hydrogen that improves gas production. Previous works have shown that olivine was active in tar removal during biomass gasification and the iron distribution into the mineral different phases has a real influence on its efficiency. A Fe/olivine catalytic system has been designed to study tar steam reforming. This work presents the Fe/olivine catalyst characterizations (XRD, Mössbauer, TPR) and compares the Fe/olivine and olivine reactivity in toluene steam reforming, a tar model molecule. At 850 °C, an important conversion (95%) was observed for Fe/olivine during 7 h. The strong interaction between iron and olivine, and the equilibrium between Fe⁰/Fe^II/Fe^III seem to be responsible of the catalyst activity and stability in toluene steam reforming.