Oxygen binding to sulfur in nitrosylated iron--thiolate complexes: relevance to the Fe-containing nitrile hydratases

Iron-nitrosyl complex containing S-bonded monosulfinate [PPN][(NO)Fe(S,SO2-C6H4)(S,S-C6H4)] (3) has been isolated from sulfur oxygenation of complex [PPN][(NO)Fe(S,S-C6H4)2] (2) which is obtained from addition of NO molecule to [PPN][(C4H8O)Fe(S,S-C6H4)2] (1) in organic solvents. This result reveals that binding of NO to the iron center promotes sulfur oxygenation of iron dithiolates by dioxygen and stabilizes the S-bonded sulfinate iron species. Analysis of the bond angles for complexes 2 and 3 reveals that iron is best described as existing in a distorted trigonal bipyramidal coordination environment surrounded by one NO, three thiolates, and one sulfinate in complex 3, whereas the distorted square pyramidal geometry is adopted in complex 2. Complex 3 further reacts in organic solvents with molecular oxygen in the presence of [PPN][NO2] to produce the dinuclear bis(sulfinate) complex [PPN]2[(NO)Fe(SO2,SO2-C6H4)(S,S-C6H4)]2 (4). Complex 3 showed reaction with PPh3 in THF/CH2Cl2 to yield complex 2 and Ph3PO. Upon photolysis of CH2Cl2 solution of complex 3 under N2 purge at ambient temperature, the UV-vis and IR spectra consistent with the formation of complex 2 demonstrate that complex 2 and 3 are photochemically interconvertible. Obviously, complex 3 is thermally quite stable but is photochemically active toward [O] release. Also described are the X-ray crystal structures of 3 and 4.     

A theoretical study of the photoelectron spectra of dichloroketene with accurate computation of ionization energies via complete basis set limit extrapolation

We calculated the equilibrium geometries and harmonic vibrational frequencies of the ground state and five cationic states of dichloroketene using (TD-)B3LYP, PBE0, and M06/M06-2X approaches. The photoelectron spectra of dichloroketene were simulated by computing Franck-Condon factors. The ionization energies were computed using the CCSD(T) approach with extrapolation to the complete basis set (CBS) limit. We propose two new CBS energy formulas (E = E_CBS + Aexp(-x) + B/(x−1) ⁿ, n = 2 or 3) and compare the performance of different CBS approaches. A new ionic state of dichloroketene belonging to the C_s point group is reported. This state is identified as the first excited state of Cl₂CCO⁺ having a double-well potential-energy curve along the CCO bending mode with a barrier height of 1.335 eV. The simulated photoelectron spectra are in agreement with the experiment. The vertical ionization energies calculated via spectral simulation are more accurate compared with those obtained at the ground-state structure. Among the CBS formulas used, the proposed ansatz with n = 2 performs best, with a mean absolute error of 0.021 and 0.012 eV for the adiabatic and vertical ionization energies, respectively.     

Electrophoresis of biological cells: charge-regulation and multivalent counterions association model

The electrophoresis of a biological cell is analyzed theoretically. An entity, which is of amphoteric nature, is used to simulate its electrophoretic behavior. To reflect conditions of practical interest, we assume that the liquid phase contains mixed (a:b)+(c:b) electrolytes, where a and c are the valences of cations, and b is the valence of anions. We consider the case where the surface of a cell contains both bivalent acidic and monovalent basic functional groups, the dissociation/association of them yields fixed surface charge, and the multivalent cations in the liquid phase are allowed to combine with dissociated acidic functional groups, which has the effect of lowering the charge density on cell surface. The electrophoretic behaviors of a cell under various conditions are illustrated. The results obtained can be used to identify the types of functional groups that may be present on cell surface. On the other hand, if the surface functional groups involved in cell electrophoresis are known, then their density and the associated dissociation/association constants can be estimated from experimental data.     

Facile Generation of Thermally Activated Delayed Fluorescence and Fabrication of Highly Efficient Non-Doped OLEDs Based on Triazine Derivatives

A series of donor–acceptor–donor triazine-based molecules with thermally activated delayed fluorescence (TADF) properties were synthesized to obtain highly efficient blue-emitting OLEDs with non-doped emitting layers (EMLs). The targeted molecules use a triazine core as the electron acceptor, and a benzene ring as the conjugated linker with different electron donors to alternate the energy level of the HOMO to further tune the emission color. The introduction of long alkyl chains on the triazine core inhibits the unwanted intermolecular D –D/A–A-type π–π interactions, resulting in the intermolecular D–A charge transfer. The weak aggregation-caused quenching (ACQ) effect caused by the suppressed intermolecular D –D/A–A-type π–π interaction further enhances the emission. The crowded molecular structure allows the electron donor and acceptor to be nearly orthogonal, thereby reducing the energy gap between triplet and singlet excited states (ΔE_ST). As a result, blue-emitting devices with TH-2DMAC and TH-2DPAC non-doped EMLs showed satisfactory efficiencies of 12.8 % and 15.8 %, respectively, which is one of the highest external quantum efficiency (EQEs) reported for blue TADF emitters (λ_peak<475 nm), demonstrating that our tailored molecular designs are promising strategies to endow OLEDs with excellent electroluminescent performances.     

Electroosmotic flow controllable coating on a capillary surface by a sol-gel process for capillary electrophoresis

A simple coating procedure employing a sol-gel process to modify the inner surface of a bare fused-silica capillary with a positively charged quaternary ammonium group is established. Scanning electron microscopic studies reveal that a smooth coating with 1 to approximately 2 microm thickness can be obtained at optimized coating conditions. With 40 mM citrate as a running electrolyte, the plot of electroosmotic flow (EOF) versus pH shows a unique three-stage EOF pattern from negative to zero and then to positive over a pH range of 2.5 to 7.0. At pH above 5.5, the direction of the EOF is from the anode to the cathode, as is the case in a bare fused-silica capillary, and the electroosmotic mobility increases as the pH increases. However, the direction of the EOF is reversed at pH below 4.0. Over the pH range of 4.0 to 5.5, zero electroosmotic mobility is obtained. Such a three-stage EOF pattern has been used to separate six aromatic acids under suppressed EOF and to separate nitrate and nitrite with the anions migrating in the same direction as the EOF. The positively charged quaternary ammonium group on the coating was also utilized to minimize the adsorption problem during the separation of five basic drugs under suppressed EOF and during the separation of four basic proteins with the cations migrate in the opposite direction as the EOF. Also, the stability and reproducibility of this column are good.     

Regulated expressions of MMP-2, -9 by diterpenoids from Euphorbia formosana Hayata

Two new abietane type diterpenoids, namely seco-helioscopinolide (1) and 3b,7b-dihydroxy-ent-abieta-8,13-diene-12,16-olide (2) were isolated from the aerial parts of Euphorbia formosana Hayata together with helioscopinolide A (3), helioscopinolide B (4), helioscopinolide C (5) and ent-(5b,8a,9b,10a,12a)-12-hydroxyatis-16-ene-3,14-dione (6). The structures of compounds 1-6 were elucidated by analyzing their spectroscopic data and comparison with the literature. Further biological tests by gelatin zymographic analysis revealed that 3-5 significantly up-regulated the expressions and activation of MMP-2 and -9 in human fibrosarcoma cell line HT1080.     

Effect of processing conditions on gel formation in ternary cellulose acetate systems

A series of ternary systems composed of cellulose acetate (CA), N,N-dimethylacetamide (DMA), and water were prepared by varying the mixing temperature and order of component addition with increasing water content. The viscoelastic properties of the resulting ternary systems were measured using steady state and dynamic rheology. The CA/DMA/H₂O mixture formed physical gels at 17.5 and 19 wt% water concentrations after heating to 50 and 70/90 °C, respectively. Gel formation was characterized by the loss of a Newtonian plateau in the steady state as well as the transition of the elastic (G′) modulus becoming greater than the viscous (G″) modulus in the dynamic state. The order of component addition dramatically affected phase behaviour. Adding CA to the DMA/water solution resulted in lower moduli gels and the formation of a two-phase phase separated system at high nonsolvent contents in those prepared at low temperatures. The kinetics of phase separation was improved by subjecting the gels to a thermal treatment of 90 °C. In this case, the gels previously heated at 50 and 70° C showed a one-phase phase separated gel with higher viscous and elastic moduli.     

Stereoselective determination of R(-)- and S(+)-MK-571, a leukotriene D4 antagonist, in human plasma by chiral high-performance liquid chromatography.

A stereoselective high-performance liquid chromatographic method that utilizes fluorescence detection was developed for the selective and sensitive quantification of R(-)- and S(+)-enantiomers of MK-571 (1), a potent and specific leukotriene D4 antagonist, in human plasma. Racemic 1 was isolated from the acidified plasma using solid-phase extraction and the resulting residue was successfully reacted with isobutyl chloroformate and R(+)-1-(1-naphthyl)ethylamine in triethylamine-acetonitrile medium to form the diastereomer of each enantiomer. A structural analogue of 1 was used as internal standard. The derivatized sample was dissolved in 1,1,2-trichlorotrifluoroethane and an aliquot was chromatographed on a (R)-urea chiral column using a mobile phase containing 89% triethylamine-pentane (3:1000, v/v), 10% 2-propanol, and 1% acetonitrile at a flow-rate of 1.5 ml/min. The fluorescence response (excitation wavelength, 350 nm; emission wavelength, 410 nm) was linear (r2 greater than 0.999) for concentrations of enantiomers of 1 from 0.05 micrograms/ml, the lowest quantitation limit, up to 2.5 micrograms/ml. Intra-day coefficients of variation at 0.05 microgram/ml were 2.4% for the R(-)-isomer and 2.0% for S(+)-isomer. The corresponding inter-day coefficients of variation for R(-)- and S(+)-1 were 2.6 and 3.6%, respectively. The utility of the methodology was established by analysis of plasma samples from male volunteers receiving single intravenous and oral doses of racemic 1.     

Positively charged liposomes consisting of the KTTKS pentapeptide conjugated with rhodamine increase rhodamine toxicity in E. coli and zebrafish embryo

Liposomes composed of cell‐penetrating peptide derivatives increased transport across the cell membrane. Conjugating rhodamine to a cell‐penetrating peptide increased the toxicity of rhodamine in E. coli and zebrafish embryos. A similar total protein inhibition pattern with different intensities, indicating that the interaction pathways of the rho‐KTTKS‐CONH₂ monomer and liposomes were the same. It suggests that the rho‐KTTKS‐CONH₂ liposomes showed higher toxicity because better transport across the cell membrane increased the effective concentration inside cells. The staining of zebrafish embryos using rho‐KTTKS‐CONH₂ liposomes showed a longer retention time, suggesting that it can penetrate deeper tissues or organs in zebrafish.