Simulating physiological conditions to evaluate nanoparticles for magnetic fluid hyperthermia (MFH) therapy applications

Magnetite nanoparticles with high self-heating capacity and low toxicity characteristics are a promising candidate for cancer hyperthermia treatment. In order to achieve minimum dosage to a patient, magnetic nanoparticles with high heating capacity are needed. In addition, the influence of physiological factors on the heat capacity of a material should be investigated in order to determine the feasibility. In this study, magnetite nanoparticles coated with lauric acid were prepared by co-precipitation of Fe³⁺:Fe²⁺ in a ratio of 2:1, 5:3, 3:2, and 4:3, and the pH was controlled using NaOH. Structural and magnetization characterization by means of X-ray diffractometry (XRD) and a superconducting quantum interference device (SQUID) revealed that the main species was Fe₃O₄ and further showed that most of the nanoparticles exhibited superparamagnetic properties. All of the magnetic nanoparticles showed a specific absorption rate (SAR) increase that was linear with the magnetic field strength and frequency of the alternating magnetic field. Among all, the magnetic nanoparticles prepared in a 3:2 ratio showed the highest SAR. To further test the influence of physiological factors on the 3:2 ratio magnetic nanoparticles, we simulated the environment with protein (bovine serum albumin, BSA), blood sugar (dextrose), electrolytes (commercial norm-saline) and viscosity (glycerol) to examine the heating capacity under these conditions. Our results showed that the SAR value was unaffected by the protein and blood sugar environments. On the other hand, the SAR value was significantly reduced in the electrolyte environment, due to precipitation and aggregation with sodium ions. For the simulated viscous environment with glycerol, the result showed that the SAR values reduced with increasing glycerol concentration. We have further tested the heating capacity contribution from the Néel mechanism by trapping the magnetic nanoparticles in a solid form of polydimethylsiloxane (PDMS) to eliminate the heating pathway due to a Brownian motion. We measured the heating capability and determined that 47% of the total heat generated by the magnetic nanoparticles was from the Néel mechanism contribution. For evaluating magnetic nanoparticles, this method provides a fast and low cost method for determining qualitative and quantitative information measurement for the effect of physiological interference and could greatly reduce the cost and time by in vitro or animal test.     

Magnetic force microscopy studies of domain walls in nickel and cobalt films

A magnetic force microscopy is used to examine the domain walls in nickel and cobalt films deposited by argon ion sputtering. Thin nickel films deposited at high substrate temperatures exhibit coexistent Bloch and Neel walls. Films grown at room temperature display alternative Bloch lines with cap switches. These films agglomerate to form grains after annealed at high temperatures. The film composed of larger grains behaves better nucleation implying magnetic domains of closure, while the film composed of smaller grains exhibits more defects implying alternative Bloch lines. We have also observed domain displacements and cap switches, which occur due to precipitation of particles in small grain size films. Stripe domains are observed for film thicknesses larger than 100 nm. They become zigzag cells when an external field of 1.5 T is applied perpendicular to the surface of the films. This experiment indicates that the domain sizes in thin films and the strip widths for thick films both depend on the square-root of the film thickness, which varies from 5 to 45 nm and from 100 to 450 nm, respectively.     

Femtosecond holography in lithium niobate crystals

Spatial gratings are recorded holographically by two femtosecond pump pulses at 388 nm in lithium niobate (LiNbO3) crystals and read out by a Bragg-matched, temporally delayed probe pulse at 776 nm. We claim, to our knowledge, the first holographic pump-probe experiments with subpicosecond temporal resolution for LiNbO3. An instantaneous grating that is due mostly to the Kerr effect as well as a long-lasting grating that results mainly from the absorption caused by photoexcited carriers was observed. The Kerr coefficient of LiNbO3 for our experimental conditions, i.e., pumped and probed at different wavelengths, was approximately 1.0 x 10(-5) cm2/GW.     

Fabrication of aligned single wall carbon nanotube absorbers for high power passive mode-locked Nd:GdVO<Subscript>4</Subscript> laser

Using the vertical evaporation technique we fabricated saturable absorbers by transferring the water-soluble single wall carbon nanotubes (SWCNT) onto a hydrophilic quartz substrate. The fast recovery times of the absorber were measured to be 136 and 790 fs. The modulation depth of the absorber was about 2%. Passive mode-locked Nd:GdVO₄ laser using such an absorber was demonstrated. The continuous wave mode-locked pulses with the pulse duration of 12.4 ps and the repetition of 120 MHz were achieved. The maximum average output power of the mode-locked laser is 2.4 W at the pump power of 13 W. Such kind of absorber has potential to be put into practical use for high power solid-state laser mode locking.     

Multifunctional carbon-coated magnetic sensing graphene oxide-cyclodextrin nanohybrid for potential cancer theranosis

Journal of Nanoparticle Research - Over the last years, an environmentally friendly and economically efficient way of nanoparticle production has been found in the biosynthesis of metal...     

Electromigration of copper in lead

The electromigration of copper in lead was measured under isothermal conditions by a steady-state method. ⁶⁴Cu was introduced into the lead solvent as a radioactive tracer solute. After electromigration, the steady-state, concentration-distance curve was determined by standard sectioning, weighing and counting techniques. Although the experiments extend from 215 to 303°C, the measurements for Z¹, the effective charge number for copper in lead, appear to show at low temperature a strong dependence on concentration and are also difficult to reproduce satisfactorily in this temperature range. Accordingly only the results in the range from 240°C and up have been included in calculating the electromigration parameters. These results give Z¹ in the range 1.1 ± 0.3 and indicate an electrostatic charge, Z_el, of 1,8 ±0.9.     

Translations and Associated Dirichlet Polyhedra in Complex Hyperbolic Space

We study a nonidentity transvection (i.e. (strictly) hyperbolic isometry) or nonidentity Heisenberg translation f of complex hyperbolic space H ⁿ and a Dirichlet polyhedron P of the cyclic group f. We have four main results: (a) If z & in H ⁿ and the axis of a nonidentity transvection are not complex collinear, then, roughly speaking, any two distinct 'naturally arising' geodesics passing through z are not complex collinear. (b) If g is also a transvection or Heisenberg translation of H ⁿ and z & in H ⁿ such that f(z)=g(z) and f ^–1(z)=g ^–1(z), then f=g. (c) We classify all this kind of polyhedra up to congruence in H ⁿ. (d) We obtain an equivalent condition for P to be cospinal (which means that the complex spines of the two sides of P coincide) in terms of the distance of the spines of the two sides of P.     

Compact optical function generator

We demonstrate the use of a nonlinear photonic crystal to generate a harmonic comb and an ultrabroad-band acousto-optic modulator for the field amplitudes and phases of the comb to succeed in synthesizing femtosecond and subfemtosecond optical field waveforms. Nonsinusoidal fields of various shapes are synthesized and verified using shaper-assisted linear cross-correlation. The compact all-solid-state system could lead to the realization of a portable arbitrary optical waveform synthesizer that is analogous in many aspects to an RF function generator.     

Femtosecond time-resolved absorption processes in lithium niobate crystals

Femtosecond pump pulses are strongly attenuated in lithium niobate owing to two-photon absorption; the relevant nonlinear coefficient beta(p) ranges from approximately 3.5 cm/GW for lambda(p) = 388 nm to approximately 0.1 cm/GW for 514 nm. In collinear pump-probe experiments the probe transmission at the double pump wavelength 2lambda(p) = 776 nm is controlled by two different processes: A direct absorption process involving pump and probe photons (beta (r) = 0.9 cm/GW) leads to a pronounced short-duration transmission dip, whereas the probe absorption by pump-excited charge carriers results in a long-duration plateau. Coherent pump-probe interactions are of no importance. Hot-carrier relaxation occurs on the time scale of < or approximately equal to 0.1 ps.     

Active dielectric metasurface based on phase‐change medium

We propose all‐dielectric metasurfaces that can be actively re‐configured using the phase‐change material Ge₂Sb₂Te₅ (GST) alloy. With selectively controlled phase transitions on the composing GST elements, metasurfaces can be tailored to exhibit varied functionalities. Using phase‐change GST rod as the basic building block, we have modelled metamolecules with tunable optical response when phase change occurs on select constituent GST rods. Tunable gradient metasurfaces can be realized with variable supercell period consisting of different patterns of the GST rods in their amorphous and crystalline states. Simulation results indicate a range of functions can be delivered, including multilevel signal modulating, near‐field coupling of GST rods, and anomalous reflection angle controlling. This work opens up a new space in exploring active meta‐devices with broader applications that cannot be achieved in their passive counterparts with permanent properties once fabricated.