SBA-15负载钒氧化物催化剂上甲烷选择氧化反应

对SBA-15负载的钒、钼、钨氧化物催化的甲烷选择氧化反应性能进行了比较,发现VO_x/SBA-15催化剂优于MoOx/SBA-15和WOx/SBA-15催化剂.针对钒氧化物催化剂,考察了不同钒源、不同载体以及少量P元素的添加对催化性能的影响,结果表明以SBA-15为载体的催化剂的性能好于MCM-41和Cab-O-Sil为载体的催化剂;与V₂O₅,VO(C₂O₄)相比,NH₄VO₃是制备性能良好的VO_x/SBA-15的钒源;在VO_x/SBA-15中,添加少量P元素后,HCHO的选择性有一定程度的提高.XRD,N₂物理吸附、UN-Raman和H₂-TPR表征结果表明,负载量低于3 wt%时,钒组分可能主要以高分散的单核的VO_x物种存在,我们推测该物种对甲烷选择氧化制甲醛起关键作用.     

固体吸附-毛细管气相色谱法测定环境空气中的偏二甲肼

采用固体吸附-毛细管气相色谱法测定环境空气中偏二甲肼的含量,色谱峰高与偏二甲肼浓度在0～13．8mg／L范围内线性关系良好,当采样体积为60L时,检出限和测定下限分别为0．37μg／m^3和1．2μg／m^3。低、中、高3种浓度的偏二甲肼标准溶液测定结果（n=6）的相对标准偏差分别为3．5％,2．6％,1．9％,样品加标回收率为84．5％～101．0％。     

Immobilization of DNA on a glassy carbon electrode based on Langmuir–Blodgett technique: application to the detection of epinephrine

A double-stranded (ds) DNA-octadecylamine Langmuir–Blodgett film was attached to the surface of glassy carbon electrode (GCE) to create a novel voltammetric sensor (DNA-LB/GCE) for epinephrine (EP). Atomic force microscopy and electrochemical impedance spectroscopy were employed to study the characteristic of the DNA-LB film. The electrochemical behavior of EP at the modified electrode was investigated in pH 6.0 phosphate buffer solutions by cyclic voltammetry and amperometric methods. Compared with bare GCE, the DNA-LB/GCE sensor demonstrated an electrocatalytic effect on the oxidation of EP. In addition, the sensor shows excellent selectivity for EP detection, being free of interference from excess ascorbic acid and uric acid, and the method was also applied successfully to detect EP in the human urine samples.     

Hydrosilane and bismuth-accelerated palladium catalyzed aerobic oxidative esterification of benzylic alcohols with air

In a palladium-catalyzed oxidative esterification, hydrosilane can serve as an activator of palladium catalyst with bismuth, thus leading to a novel ligand- and silver-free palladium catalyst system for facile oxidative esterification of a variety of benzylic alcohols in good yields.     

Molecular imprinting of protein in Pickering emulsion

A new strategy of molecular imprinting to prepare spherical hydrogels via water-in-oil Pickering emulsion polymerization was developed. The imprinted hydrogels exhibited fast adsorption kinetics and significant selectivity for the target protein.     

Preparation,characterization and application of a new 25,27‐bis‐[2‐(5‐methylthiadiazole)thioethoxyl]‐26,28‐dihydroxy‐para‐tert‐butyl calix[4]arene stationary phase for HPLC

A new para‐tert‐butylcalix[4]arene column containing thiadiazole functional groups was prepared and used for the separation of polycyclic aromatic hydrocarbons, phenolic compounds, aromatic amines, benzoic acid and its derivatives by high‐performance liquid chromatography (HPLC). The effect of organic modifier content in the mobile phase on retention and selectivity of these compounds were investigated. The results indicate that the stationary phase behaves like reversed‐phase packing. However, hydrogen bonding, π–π and inclusion interactions seem to be involved in the separation process. The column has been successfully employed for the analysis of clenbuterol in pork and pig casing; the limit of detection and the limit of quantitation for this method by HPLC‐UV detection was 0.03 and 0.097 μg/mL, respectively; the method is demonstrated to be suitable and a competitive alternative analytical method for the determination of clenbuterol.     

Screening of glycoside isomers in P. scrophulariiflora using ionic liquid‐based ultrasonic‐assisted extraction and ultra‐performance liquid chromatography/electrospray ionization quadrupole time‐of‐flight tandem mass spectrometry

A powerful ionic liquid‐based ultrasonic‐assisted extraction (ILUAE) method combined with ultra‐performance liquid chromatography coupled to electrospray ionization quadrupole time‐of‐flight tandem mass spectrometry (UPLC/ESI‐QTOFMSⁿ) was employed in the rapid simultaneous screening of iridoid glycosides, phenylethanoid glycosides, and cucurbitacin glycosides from P. scrophulariiflora. The ILUAE procedure was optimized over several ultrasonic parameters, including the ultrasonic power, concentration of the ionic liquid, and solid–liquid ratio. A comparison with conventional heat‐reflux extraction and regular UAE demonstrated that the optimized approach yielded a high extraction efficiency (Picroside I, 2.84%; Picroside II, 3.57%; 6‐O‐E‐feruloyl catalpol, 2.20%) within a short extraction time of 30 min. Negative ion mode ESI‐QTOFMS² analysis of the fragmentation reactions of the [M–H]^– ions was conducted to characterize the diagnostic ions related to the glycosyl moieties, aglycone units, and the type and substituted position of the ester groups. Interestingly, the positional isomers of the iridoid glycosides could be easily discriminated based on the characteristic ions. A total of 15 glycosides, including three groups of iridoid glycoside isomers and two groups of phenylethanoid glycoside isomers, were conveniently identified within 13.5 min. Moreover, 6'‐O‐vanilloyl catalpol was identified in P. scrophulariiflora for the first time. The method developed here was further validated by measuring the recovery, correlation coefficient (R²), and reproducibility (RSD, n = 5) of three iridoid glycosides: 89.60%–109.02%, 0.9991–0.9998, and 0.93%–1.44%, respectively. This study demonstrated the capabilities of ILUAE combined with UPLC/ESI‐QTOFMSⁿ for the rapid screening of glycosides in P. scrophulariiflora. This method offers an approach to similar studies on other natural plants. Copyright © 2012 John Wiley & Sons, Ltd.     

大分子体系的量子化学分块方法

碎片化方法为量子化学方法的发展以及在大分子体系的应用开辟了新的道路。在过去的十年里,我们见证了该领域的诸多成果,并且我们相信该方法的发展仍将持续下去。这篇文章简单回顾了近期碎片化方法在大分子电子结构计算领域的进展,重点突出中国学者在该领域的贡献。     

Novel redox-active ionic thermotropic liquid crystalline complexes of polyelectrolyte and ferrocenyl surfactants

Redox-active polyelectrolyte-surfactant complexes(PSC) were prepared via the ionic self-assembly of sodium poly(styrenesulfonate) (PSS) and ferrocenyl surfactant,(11-ferrocenylundecyl)trimethylammonium bromide(FTMA) in aqueous solution. The PSS-FTMA complex exhibited an ordered interdigitated monolayer mesomorphous structure with the long period of d = 3.13 nm,and was in the ionic thermotropic liquid crystal SmA state at room temperature.Interestingly,in the solid complex, the ferrocenyl moieties formed H-aggregation showing an increase in theπ-π~* energy transfer of cyclopentadienes in the ferrocene moieties as known from the blue-shift in the UV spectrum.The complexes showed higher thermal stability compared with their components due to the ionic interaction.The PSS-FTMA film had a good redox reversibility,which promised to be used in electrochemical sensors.     

Carbazole-modified blue light-emitting copolymers with the backbones integrated by diphenyloxadiazole,fluorene, and triphenylamine

Two new blue light-emitting polymers, poly{[2,5-bis(4-phenylene)-1,3,4-oxadiazole]-[9,9-dihexylfluorene-2,7-diyl]-[N-(4-(9H-carbazol-9-yl)phenyl)-N,N-bis(p-phenylene)aniline]} (POFPA) and poly{[2,5-bis(4-phenylene)-1,3,4-oxadiazole]-[9,9-dihexylfluorene-2,7-diyl]-[4-(3,6-(di-9H-carbazol-9-yl)-9H-carbazol-9-yl)-N,N-bis(p-phenylene)-aniline]} (POFCPA), were synthesized by Suzuki coupling reactions. By GPC analysis against a linear polystyrene standard POFPA and POFCPA were found to have M_n of 1.68 × 10⁴ and 3.70 × 10³, respectively. In contrast to POFPA, the main absorption peak of POFCPA in dilute toluene solution was blue-shifted by Δλ = 26 nm owing to its backbone of relatively shorter π-conjugation length and more carbazole units in side chain. The absolute fluorescence quantum yield (Φ_f) of POFCPA in dilute toluene solution was determined as 73%, much higher than that of POFPA (Φ_f ≈ 58.9%) measured under the same conditions. An electroluminescence device based on POFCPA displays a stable blue emission having color coordinates of (0.15, 0.20), a maximum brightness of 4762 cd/m², and a maximum current efficiency of 1.79 cd/A. By using this polymer as the host material doped with 1 wt.% 4,4′-bis[2-(4-(N,N-diphenylamino)phenyl)vinyl]biphenyl, the achieved highest brightness, maximum current efficiency and maximum power efficiency are 13,613 cd/m², 3.38 cd/A, and1.84 lm/W, respectively.