3-(4-氯苯基)-6-取代苯氧乙酰氨基均三唑并[3,4-b]-1,3,4-噻二唑类化合物的合成

将取代苯氧乙酰氨基引入到3,6-二取代均三唑并噻二唑的分子骨架中, 设计合成了8个未见文献报道的3-(4-氯苯基)-6-取代苯氧乙酰氨基均三唑并[3,4-b]-1,3,4-噻二唑类化合物5a～5h, 结构经元素分析、IR和¹H NMR等测试得到确证.     

Conversion of 3-benzoyl-1-methyl-4-phenyl-γ-piperidol by arylamines and arylhydrazines. Synthesis of 3-arylamino-1-oxo-1-phenylpropanes and 1,3-diarylpyrazoles and their fragmentation under electron impact

It has been established that on heating, 3-benzoyl-4-hydroxy-1-methyl-4-phenylpiperidine is ring-opened in the presence of arylamines by a type of retroaldol reaction, with subsequent transamination of the intermediate Mannich base and the formation of 3-arylamino-1-oxo-1-phenylpropanes. When using arylhydrazines this γ-piperidol is recyclized with the formation of 1,3-diarylpyrazoles and their 4,5-dihydro derivatives. The mass spectral behavior of a series of 3-arylamino-substituted 1-phenylpropanones has been studied. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1486–1495, October, 2007.     

高速逆流色谱与质谱联用在中药分析中的应用

高速逆流色谱 ( High- speed countercurrent chromatography,HSCCC)是新型的液 -液分配色谱技术 ,它利用多层螺旋管同步行星式离心运动 ,在短时间内实现样品在互不相溶的两相溶剂系统中的高效分配 ,从而实现样品分离[1] . HSCCC分离纯化后 ,若用 MS离线检测 ,此时须挥发原 HSCCC的溶剂体系 ,才能实现样品转移 ,还可能会带来样品污染 .HSCCC与 MS的联用克服了这些缺陷 ,具有很强的实用价值 .丹参酮 A( Tashinone A)是一种结晶性菲醌类化合物 [2 ] ,在丹参乙醚提取物中含量丰富 .本文采用正己烷 -乙醚 -乙醇 -水体系 ,将 HSCC…     

Determination of methylmercury fluxes across the air–water and air–soil interfaces by gas chromatography with electron capture detection

A method for the determination of methylmercury (MeHg) fluxes across the air–water and air–soil interfaces was developed using an in situ chamber. The MeHg in the air coming out of the chamber was captured by a column containing sulfhydryl cotton fiber adsorbent. MeHg was then desorbed from the column by using 2 mol L^–1 HCl. The MeHg in the effluent was extracted with benzene, and determined by gas chromatography with electron capture detection. Finally, the MeHg flux was calculated using the chamber. The method was applied to simulated experiments, and the results showed that the MeHg fluxes in the air–water system were higher than those in the air–soil–water system. The method was also successfully applied to the field measurements of an environment polluted by a chemical factory, and the results showed that the MeHg fluxes across the air–soil and air–water interfaces were 0.21–3.09 and 0.14–0.79 ng m^–2 h^–1, respectively. The method will be a useful tool in the environmental study of MeHg.     

Determination of proteins with Alizarin Red S by Rayleigh light scattering technique

A new protein determination method by enhanced Rayleigh light scattering (RLS) technique has been developed. In acid condition (pH=3.60), RLS of 1,2-dihydroxyanthraquinone-3-sulfonate (Alizarin Red S) can be greatly enhanced by addition of proteins, resulting in two characteristic peaks, 360 and 505 nm, respectively. The new protein assay is based on the RLS enhancement and spectrum change. The optimum condition for the reaction was investigated. The linear range is 0.20-24.9 μg ml⁻¹ for BSA and 0.20-15.5 μg ml⁻¹ for HSA. The detection limits (S/N=3) are 9.59 ng ml⁻¹ for BSA and 9.51 ng ml⁻¹ for HSA. The results of determination for human serum samples were comparable to those obtained by Bradford method. The binding stoichiometry was determined.     

New cytotoxic bufadienolides from the biotransformation of resibufogenin by Mucor polymorphosporus

Resibufogenin is a cytotoxic steroid isolated from the Chinese drug ChanSu. The biotransformation of resibufogenin by Mucor polymorphosporus afforded 22 products, and 15 of them were new. The transformation reactions involved hydroxylations at C-1β, C-5, C-7α, C-7β, C-12α, C-12β and C-16α, as well as epimerization or dehydrogenation of 3-OH. Hydroxylations at C-12α, C-12β and C-16α were the major reactions, each giving products in >5% yields, whereas the other products were obtained in fairly low yields. Some of the products showed decreased but still potent cytotoxicities. This investigation provided a useful approach to prepare new bufadienolides and most of them were difficult to obtain by chemical means.     

Development of a quality control method for the characterization of oligonucleotides by capillary zone electrophoresis-electrospray ionization-quadrupole time of flight-mass spectrometry

A capillary zone electrophoresis-negative electrospray ionization-quadrupole time of flight-mass spectrometric method was developed for the characterization of oligonucleotides after synthesis, using model compounds. The major difficulty is the adduction of metal cations to the polyanionic backbone of the oligonucleotide sample, resulting in complex spectra and decreased sensitivity. Several approaches were investigated to circumvent this problem. Separation was performed in an ammonium carbonate buffer. During separation, the interfering metal ions were exchanged for ammonium ions, which are less tightly bound to the oligonucleotide when ionized. The influence of the addition of piperidine and imidazole or trans-1,2-diaminocyclohexane-N,N,N',N'-tetraacetic acid (CDTA) to the running buffer for further reduction of cation adduction was investigated. Addition of CDTA to the buffer system resulted in a deconvoluted spectrum with very little adducts. On-line sample stacking proved vital to preconcentrate the samples. The pH and the concentration of the ammonium carbonate buffer as well as the electrophoresis voltage were optimized to achieve the best signal response for the oligonucleotides and a maximum reduction of the cation adducts as well as a short analysis time. Finally, the sheath liquid composition was examined for further improvement of the signal. The developed method was used to analyze different oligonucleotides (5000-9200 Da) in light of its use as a final quality control method for oligonucleotides in terms of purity and sequence homogeneity of the synthesized products. In all cases, very little adducts were observed in the deconvoluted spectra, and the relative errors of the measured molecular masses ranged from 3 to 35 ppm.     

Synthesis and structure of a novel three-dimensional metal selenite containing multidirectional intersecting double helical chains: [Fe2(H2O)4(SeO3)2]

A novel three-dimensional metal selenite [Fe₂(H₂O)₄(SeO₃)₂] (1) has been hydrothermally synthesized and characterized by the elemental analyses, IR spectrum, TG analysis and the single crystal X-ray diffraction. Compound 1 crystallizes in the monoclinic system, space group P21/n, with a=6.5283(13) Å, b=8.8754(18) Å, c=7.6798(15) Å, (=98.82(3)β, V=439.71(15) Å3, and Z=2. Compounds 1 exhibits interesting three-dimensional structure constructed from {FeO₆} octahedra and {SeO₃} pyramids linked via the corner- and/or edge-sharing mode. The most interesting structural feature of compound 1 is that the existence of multidirectional intersecting double helical chains in one compound.     

LapRLSR for NIR spectral modeling and its application to online monitoring of the column separation of Salvianolate

A novel near infrared (NIR) modeling method—Laplacian regularized least squares regression (LapRLSR) was presented, which can take the advantage of many unlabeled spectra to promote the prediction performance of the model even if there are only few calibration samples. Using LapRLSR modeling, NIR spectral analysis was applied to the online monitoring of the concentration of salvia acid B in the column separation of Salvianolate. The results demonstrated that LapRLSR outperformed partial least squares (PLS) significantly, and NIR online analysis was applicable.     

Novel synthesis of o-naphthothiophenequinone derivatives via regioselective Diels-Alder reaction

A novel procedure to construct o-naphthothiophenequinones has been achieved from readily available o-benzothiophenquinones and N-dienes via Diels-Alder reaction-aromatization sequence as key steps. The absolute regioselectivity was established via Diels-Alder reaction of o-benzothiophenquinones with rich electron N-dienes.