Two 3D supramolecular polymers constructed from an amino acid and a high-nuclear Ln6Cu24 cluster node

The first successful attempt to construct 3D supramolecular frameworks with high-nuclear 3d-4f heterometallic clusters as a node is reported. The self-assembly of Ln3+, Cu2+ and amino acid in solution leads to the formation of two polymers, 35-nuclear complex [Sm6Cu29] 1 with a primitive cubic net-like structure and 36-nuclear complex [Nd6Cu30] 2 with a face-centred cubic network type structure. Glycine and L-proline, respectively, were used as ligands. It should be noted that 2 has a chiral framework. X-ray structure analyses show that 1 crystallizes in the triclinic P1 space group (a=19.6451(8), b=20.4682(8), c=20.7046(8) A, alpha=89.453(1), beta=66.290(1), gamma=68.572(1) degrees, V=7003.0(5) A3 and Z=1) and 2 belongs to the cubic P2(1)3 space group (a=b=c=32.4341(3) A, V=34 119.7(5) A3 and Z=4). Both complexes utilize Ln6Cu24 octahedral clusters as nodes and trans-Cu(amino acid)2 groups as bridges. Electrical conductivity measurements reveal that both polymers behave as semiconductors.     

四磺酸基酞菁锌在水和非水溶剂中的电化学性质研究

在非水溶剂（二甲基亚砜（ＤＭＳＯ）及Ｎ,Ｎ＿二甲基甲酰胺（ＤＭＦ））中的伏安曲线．呈现三对电流峰,表明存在三个可逆或准可逆酞菁配体的单电子转移过程,而在水溶液中则不呈现准可逆行为,且波形改变很大．此外,还比较了四磺酸基酞菁锌的水溶液在自然光和红光（６００～７００ｎｍ）照射下的循环伏安曲线,其氧化还原峰的数目和峰电位基本不变,但在红光照射下比自然光照射下的峰电流明显增大．     

Fluorescence ratiometric pH sensor prepared from covalently immobilized porphyrin and benzothioxanthene

A fluorescence ratiometric sensor for pH determination is described in this paper. The sensor incorporated the pH-sensitive dye meso-5,10,15,20-tetra-(4-allyloxyphenyl)porphyrin (TAPP) as an indicator and a pH-insensitive dye N-(2-methacryloxyethyl)benzo[k,l]thioxanthene-3,4-dicarboximide (MBTD), a benzothioxanthene derivative, as a reference for fluorescence ratiometric measurement. To prevent leakage of the dyes, both were photocopolymerized with acrylamide, hydroxyethyl methacrylate, and triethylene glycol dimethacrylate on the silanized glass surface. The reproducibility and response time of the prepared sensor were sufficient. Most common coexisting inorganic ions and organic compounds did not interfere with pH sensing. In the acidic pH range from 1.5 to 5.0 the fluorescence intensity ratio of the two dyes varied linearly as a function of pH. The sensing membrane was found to have a lifetime of at least one month. The sensor was applied to the analysis of waste water and artificial samples.     

联吡啶铁/H2O2体系在可见光下降解芥子气模拟剂2-CEES

采用联吡啶铁/H2O2体系在可见光照射条件下(λ>450nm)降解芥子气模拟剂2-氯乙基乙基硫醚(2-CEES).考察了不同反应条件下的降解效果,通过EPR分析确定了反应过程中产生的高活性物种,利用GC-MS和NMR等方法分析了反应的产物,跟踪了反应过程中TOC的变化,并根据结果对2-CEES光催化降解的反应机理进行了探讨.     

不同引发核树枝状大分子的合成

含不同分支官能团树枝状大分子的合成是目前研究的一个热点。文献报道的有两方向引发核、三方向引发核、四方向引发核、六方向引发核等结构新颖的树枝状分子。本文综述了不同引发核及其衍生物在树枝状大分子合成中的应用。     

The use of carbon nanofibers microcolumn preconcentration for inductively coupled plasma mass spectrometry determination of Mn,Co and Ni

Based on carbon nanofibers (CNFs) as a solid phase extraction adsorbent, a microcolumn preconcentration method coupled to inductively coupled plasma mass spectrometry (ICP–MS) was developed for the determination of trace elements (Mn, Co and Ni). The effect of various experimental parameters such as pH, sample flow rate and volume, elution solution and interfering ions on the retention of the studied ions have been investigated systematically. During all the steps of the experimental process, Mn, Co and Ni could be quantitatively sorbed on the microcolumn containing CNFs in the range of pH 6.0–9.0, and then eluted completely with 0.5 mol ml^− 1 HNO₃. A preconcentration factor of 150-fold was obtained. The detection limits for Mn, Co and Ni were 40, 0.4 and 8.0 pg ml^− 1, respectively, with relative standard deviations less than 6.0%. In order to validate the proposed method, two certified reference materials of human hair (GBW 07601) and mussel (GBW 08571), and water sample were analyzed with satisfactory results. The recoveries were between 95.0 and 114%.     

Influence of post-annealing temperature on properties of ZnO:Li thin films

Li-doped ZnO thin films were prepared on glass substrates by DC reactive magnetron sputtering. The influence of post-annealing temperature on the electrical, structural, and optical properties of the films was investigated. A conversion from p-type conduction to n-type in a range of temperature was confirmed by Hall measurement. The optimal p-type conduction is achieved at the annealing temperature of 500 °C with a resistivity of 57 Ω cm, carrier concentration of 1.07 × 10¹⁷ cm⁻³ and Hall mobility of 1.03 cm² V⁻¹ s⁻¹. From the temperature-dependent PL analysis, the energy level of Li_Zn acceptor was determined to be 140 meV above the valence band.     

Immobilization of glucose oxidase with the blend of regenerated silk fibroin and poly(vinyl alcohol) and its application to a 1,1′- dimethylferrocene-mediating glucose sensor

The structure and properties of the blend of regenerated silk fibroin (RSF) and poly(vinyl alcohol) (PVA) were investigated. The two polymers in the blend are in the state of phase segregation. Infrared (IR) spectra indicate that the RSF in the blend maintains its intrinsic properties, thus, ethanol treatment can transfer silk I structure of RSF to silk II structure. The water absorption property and mechanical property of the blend are improved in comparison with those of RSF. The blend maintains the major merit of RSF, that is, it can immobilize glucose oxidase on the basis of the conformational transition from silk I structure to silk II structure. The properties of the immobilized enzyme are examined. Moreover, the second generation of glucose sensor based on the immobilized enzyme is fabricated and it has a variety of advantages including easy maintenance of enzyme, simplicity of construction, fast response time and high stability.     

Oxidation of Stereo‐regular Poly(styrene‐co‐4‐methylstyrene) by Cobalt(II) Acetate Tetrahydrate/Sodium Bromide Catalyst

Chemical modification on the stereo‐regular poly(styrene‐co‐4‐methylstyrene) (sPS‐PMS) was attempted in this study. Metallocene copolymerization of styrene (St) and 4‐methylstyrene (MSt) was performed by using η⁵‐pentamethylcyclopentadienyl‐titanium(IV)tributoxide (Cp*Ti(OBu)₃)/methylaluminoxane (MAO)/tri‐iso‐butylaluminum (TIBA) catalyst in the bulk state. Cobalt(II) catalyst was then applied to oxidize the benzylic methyl group on the MSt units of the resulting sPS‐PMS copolymer. Both aldehyde and carboxylic acid in the oxidized products were resolved by the FTIR and ¹H NMR. The oxidized sPS‐PMSs exhibit a low and a high‐temperature T_g and T_m corresponding to the transitions in the amorphous and the crystalline regions. Hydrogen‐bond and polar interactions between the aldehyde and carboxylic acids tend to interrupt the regular chain packing of the oxidized sPS‐PMS, resulting in the lowering of T_m with oxidation level. The oxidized sPS‐PMS showed better adhesion to glass fiber than pure sPS‐PMS copolymer as evaluated from the respective SEM fractured micrographs.     

Comparison of adsorbents for on-line solid-phase extraction of polycyclic aromatic hydrocarbons before liquid chromatography with UV detection

Summary On-line solid-phase extraction (SPE) coupled with reversed-phase liquid chromatography and UV detection at 254 nm has been used for the determination of trace-level polycyclic aromatic hydrocarbons (PAH) in soil extracts. Five commercially available adsorbents (C₈, C₁₈, PLRP-S, PRP-1, and Bond-Elut Env) were evaluated. Results showed that recovery of the PAH decreased with increasing molecular weight, because of their poorer solubility. Recovery of high-molecular-weight PAH was significantly improved by addition of 10% (v/v) acetonitrile to the sample before loading of the SPE adsorbent. PAH recovery ranged from 64.0 to 108% when a 50 mL sample spiked with 1 μg L⁻¹ was applied to these adsorbents. Determination of PAH was possible with detection limits below 0.05 μg L⁻¹, which corresponds to 0.2 μg kg⁻¹ soil. The method was successfully used to determine PAH in soil extracts.