可列值随机变量序列的一个小偏差定理

本文得到了可列值随机变量序列的用不等式表示的强极限定理,即小偏差定理,包含了［１］的结果．［１］中研究的是相对于齐次Ｍａｒｋｏｖ 链的偏差,而本文允许非齐次的情形．     

共轭高聚物双分子结构中激子电致解离的动力学研究

通过绝热动力学方法,研究了共轭高聚物双分子结构中激子对外加电场的响应.当外电场强度超过某个临界值时,激子会被解离成一对自由的电子与空穴.对于双分子结构中的激子,其临界解离电场除了受电子与电子相互作用以及电声相互作用影响之外,还受分子间相互作用的影响.由动力学演化的计算得到,激子临界解离电场强度随分子间相互作用强度的增大而呈非线性降低;随电子与电子相互作用强度的增大呈非线性减小的变化;但是,随电声耦合强度的增大却呈现出线性增大的变化.     

High-performance all-solid-state electrolyte for sodium batteries enabled by the interaction between the anion in salt and Na3SbS4

All-solid-state sodium batteries with poly(ethylene oxide) (PEO)-based electrolytes have shown great promise for large-scale energy storage applications. However, the reported PEO-based electrolytes still suffer from a low Na⁺ transference number and poor ionic conductivity, which mainly result from the simultaneous migration of Na⁺ and anions, the high crystallinity of PEO, and the low concentration of free Na⁺. Here, we report a high-performance PEO-based all-solid-state electrolyte for sodium batteries by introducing Na₃SbS₄ to interact with the TFSI⁻ anion in the salt and decrease the crystallinity of PEO. The optimal PEO/NaTFSI/Na₃SbS₄ electrolyte exhibits a remarkably enhanced Na⁺ transference number (0.49) and a high ionic conductivity of 1.33 × 10⁻⁴ S cm⁻¹ at 45 °C. Moreover, we found that the electrolyte can largely alleviate Na⁺ depletion near the electrode surface in symmetric cells and, thus, contributes to stable and dendrite-free Na plating/stripping for 500 h. Furthermore, all-solid-state Na batteries with a 3,4,9,10-perylenetetracarboxylic dianhydride cathode exhibit a high capacity retention of 84% after 200 cycles and superior rate performance (up to 10C). Our work develops an effective way to realize a high-performance all-solid-state electrolyte for sodium batteries.

A high-performance all-solid-state PEO/NaTFSI/Na₃SbS₄ electrolyte for sodium batteries is realized owing to the electrostatic interaction between TFSI⁻ in the salt and Na₃SbS₄, which immobilizes TFSI⁻ anions and promotes the dissociation of NaTFSI.     

Narrowband blue emission with insensitivity to the doping concentration from an oxygen-bridged triarylboron-based TADF emitter: nondoped OLEDs with a high external quantum efficiency up to 21.4%

Blue thermally activated delayed fluorescence (TADF) emitters that can simultaneously achieve narrowband emission and high efficiency in nondoped organic light-emitting diodes (OLEDs) remain a big challenge. Herein, we successfully design and synthesize two blue TADF emitters by directly incorporating carbazole fragments into an oxygen-bridged triarylboron acceptor. Depending on the linking mode, the two emitters show significantly different photophysical properties. Benefitting from the bulky steric hindrance between the acceptor and terminal pendants, the blue emitter TDBA-Cz exhibited a high photoluminescence quantum yield (PLQY) of 88% in neat films and narrowband emission. The corresponding non-doped blue device exhibited a maximum external quantum efficiency (EQE) of 21.4%, with a full width at half maximum (FWHM) of only 45 nm. This compound is the first blue TADF emitter that can concurrently achieve narrow bandwidth and high electroluminescence (EL) efficiency in nondoped blue TADF-OLEDs.

A donor–acceptor TADF emitter showed narrowband high-efficiency blue emission by fine molecular modulation. The corresponding OLEDs exhibited a maximum EQE of 21.4% and a small FWHM of 45 nm, representing the most efficient nondoped blue TADF-OLEDs.     

Polyimide separators for rechargeable batteries

Separators are indispensable components of modern electrochemical energy storage devices such as lithium-ion batteries (LIBs).They perform the critical function...     

Q-switched mode-locking femtosecond all-fiber laser based on Er3+/Yb3+ codoped phosphate fiber

A Q-switched mode-locking femtosecond all-fiber laser based on a 2 cm long homemade Er³⁺/Yb³⁺ codoped phosphate glass fiber has been reported. By using the nonlinear polarization evolution technique, a nearly 100% modulation depth of mode-locking pulse train is achieved. At a pump power of 410 mW, the energy of each Q-switched envelope, whose width is about 220 μs, is 10 μJ, while the duration of mode-locking pulse within the Q-switched envelope is 318-fs.     

An upgraded external beam PIXE setup for multielemental analysis of atmospheric aerosol samples

The external beam particle‐induced X‐ray emission (PIXE) setup has been upgraded by introducing a new silicon drift detector with the aim of obtaining better minimum detection limits (MDLs) at the 2 × 1.7 MV Tandetron accelerator of the Beijing Normal University in China. The upgraded external beam PIXE setup is equipped with two silicon drift detectors for PIXE analysis of low and high Z elements. A surface barrier detector for Rutherford backscattering spectrometry monitors beam and helium flow. Two kinds of aerosol filter samples (quartz fiber filters and Teflon filters) were studied. A 200‐μm thick Mylar absorber in front of the medium‐high energy X‐rays detector was adopted, and it got the best MDLs for atmospheric aerosol samples analysis. Multielemental analysis of quartz fiber filter aerosol samples was achieved. For more accurate and better MDLs of low Z elements in PIXE analysis, it is necessary to keep sufficient helium flow behind the thin samples.     

Hearing loss from interrupted, intermittent, and time varying non-Gaussian noise exposure: The applicability of the equal energy hypothesis

Sixteen groups of chinchillas (N=140) were exposed to various equivalent energy noise paradigms at 100 dB(A) or 103 dB(A) SPL. Eleven groups received an interrupted, intermittent, and time varying (IITV) non-Gaussian exposure quantified by the kurtosis statistic. The IITV exposures, which lasted for 8 hday, 5 daysweek for 3 weeks, were designed to model some of the essential features of an industrial workweek. Five equivalent energy reference groups were exposed to either a Gaussian or non-Gaussian 5 days, 24 hday continuous noise. Evoked potentials were used to estimate hearing thresholds and surface preparations of the organ of Corti quantified the sensory cell population. For IITV exposures at an equivalent energy and kurtosis, the temporal variations in level did not alter trauma and in some cases the IITV exposures produced results similar to those found for the 5 day continuous exposures. Any increase in kurtosis at a fixed energy was accompanied by an increase in noise-induced trauma. These results suggest that the equal energy hypothesis is an acceptable approach to evaluating noise exposures for hearing conservation purposes provided that the kurtosis of the amplitude distribution is taken into consideration. Temporal variations in noise levels seem to have little effect on trauma.     

A lateral super-resolution differential confocal technology with phase-only pupil filter

In order to achieve a higher lateral resolution required for ultraprecision measurement of microstructural workpieces, phase-only pupil filtering differential confocal microscopy (PFDCM), a new approach is proposed based on the differential confocal microscopy (DCM), which uses a three-zone phase-only pupil filter with lateral super-resolution capability obtained through optimized design to change the distribution of DCM three-dimensional point spread function, so that the DCM lateral resolution is therefore significantly improved while its axial resolution is slightly improved. Preliminary experimental comparison and analyses indicate that, the lateral and axial resolutions of PFDCM are better than 0.2 μm and 2 nm, respectively, when wavelength of incidence laser beam , numerical aperture of measuring lens NA=0.85, and lateral spot size with a three-zone phase-only pupil filter G_T=0.65. It is therefore concluded that PFDCM is a new approach to further improvement of lateral resolution in laser probe measurement systems.     

Solution synthesis of ZnO nanotubes via a template-free hydrothermal route

ZnO nanotubes were successfully synthesized by a simple template-free hydrothermal method. X-ray powder diffraction and transmission electron microscopy were used to characterize the as-prepared ZnO nanotubes. The average size of the nanotubes is 200-500 nm in length and 20-30 nm in diameter. In addition, a further investigation of the optimized synthetic conditions has been carried out.