红外光谱法研究LB膜中的分子取向

The structure information of orientation and packing of molecular chains can be obtained from infrared transmission and reflection-absorbance (RA) spectra. In the present paper, on the basis of Umemura et al., their FORTRAN program of minicomputer was developed and can be run on 486 personal computer. By comparison of infrared transmission and RA intensities, surface enhancement factors and molecular orientation angle were calculated using the above program, and the influence of complex refractive index, angle of incidence, and thickness of LB film were discussed. These results are consistent with that of Umemura et al.     

pH值对聚四氨基酞菁钴膜电化学和紫外光谱性质的影响

用循环伏安法在导电玻璃(ITO)和玻碳电极(GC)上制备了聚氨基酞菁钴(CoTAPc)修饰电极(CoTAPc/GC)。探讨了pH值对CoTAPc膜的光谱和电化学性质的影响，发现其氧化还原电位与pH值有线性关系，电催化活性也随酸度的增加而增加。CoTAPc膜的紫外吸收带变化与溶液pH值及在溶液中浸泡时间有关。     

稀土变质热锻模具铸钢高温磨损性能的研究

研究了稀土（RE）变质热锻模具铸钢的高温磨损性能，并与热锻模具钢H13钢和3Cr2W8V钢进行对比，探讨了稀土元素的作用和热锻模具铸钢的高温磨损机理。结果表明：随着RE加入量的增加，热锻模具铸钢的磨损率先减后增，RE加入量在质量分数为0．05％时热锻模具铸钢具有最佳的高温磨损性能。RE变质热锻模其铸钢的高温耐磨性明最高于H13钢和3Cr2W8V钢。高温磨损机理为氧化磨损和氧化物的疲劳剥落，磨屑为块状的Fe2O3和Fe3O4。     

Synthesis and photoluminescence of single crystals europium ion-doped BaF2 cubic nanorods

In this work, we used the hydrothermal method to synthesize Eu³⁺ ion-doped cubic BaF₂ nanorods, which is a luminescent material. The clubbed structures were well crystallized and exhibited face-centred cubic structures, as indicated by powder X-ray diffraction, scanning electron microscopy, electron diffraction, and transmission electron microscopy. The luminescent properties were studied, and local symmetry surrounding Eu³⁺ ions and electronic transition processes included. The results indicated that Eu³⁺ occupied only one C_4ν site in nanorods.     

Preparation and gas separation properties of zeolite T membrane

Zeolite T membranes were synthesized on tubular porous mullite tubes by hydrothermal synthesis. The membranes selectively permeated carbon dioxide from CO2/CH4 and CO2/N2 mixtures with high separation performances, which were due to combined effects of molecular sieving and competitive adsorption.     

Selective Determination of Trace Mercury (II) after Preconcentration with 4-(2-Pyridylazo)-Resorcinol-Modified Nanometer-Sized SiO2 Particles from Sample Solutions

A rapid, selective method that utilize 4-(2-Pyridylazo)-resorcinol (PAR)-modified nanometer SiO₂ (nanometer SiO₂–PAR) as a new solid-phase extractant for preconcentration of trace mercury (II) has been developed. The adsorption property of nanometer SiO₂–PAR for metal ions was studied by selectively extracting different metal ions from aqueous solutions. The results revealed an excellent affinity of the nanometer SiO₂–PAR for mercury (II) in presence of interfering metal ions at pH 4. The main parameters of solid-phase extraction such as shaking time, elution and sample dilution effect were studied. The extractant shows rapid kinetic sorption, and the adsorption equilibrium of mercury (II) on nanometer SiO₂–PAR was achieved in less than 2 min. The adsorbed mercury (II) was easily eluted by 4 mL of 6 mol L⁻¹ HCl. The maximum preconcentration factor was 50. The maximum static adsorption capacity was 276 μmol g⁻¹ at pH 4. The detection limit (3σ) was 0.43 μg L⁻¹ for cold vapor atomic absorption spectrometry (CVAAS), and the relative standard deviation of the eight replicate determinations was 2.4% for the determination of 2.0 μg of Hg(II) in 100 mL water sample. The method was applied to the determination of trace mercury (II) in sample solutions with satisfactory results.     

Electrochemical control of CO/NO ligand exchange in a triruthenium cluster monolayer assembled on a gold electrode surface

A highly selective ligand exchange reaction is realized in the self-assembled monolayer (SAM) of a triruthenium cluster on a gold electrode surface under precise electrochemical potential control. CO as well as NO molecules, which are known to play key roles in many chemical, biological, and environmental systems, can be efficiently introduced into the SAM by electrochemically tuning the electronic state of the Ru site. These unique surface reactions are more convenient and efficient than conventional ligand exchange reactions in solution and could be used for the elucidation of the electron-transfer mechanism in a biological system as well as in the development of molecular sensors and devices.     

含胺基功能性单体的聚合研究 Ⅴ.4-N,N-二甲胺基苯乙烯的合成及其作为氧化还原引发体系组分的研究

<正> 前文我们报告了含有芳香叔胺基的丙烯酸酯、甲基丙烯酸-4-N,N-二甲氨基苄酯(DMABMA)在过氧化二月桂酰(LPO)引发下的聚合动力学。从所得的聚合速度方程式及低的聚合活化能,认为DMABMA与LPO形成氧化还原体系而使DMABMA聚合,在本文第Ⅳ报中报道了DMABMA不仅能引发甲基丙烯酸甲酯的聚合,还参与聚甲基丙烯酸甲酯的链中,因此称这种既能参与引发聚合反应,又参与聚合物链中的引发“引发剂单体(initiatomer)”。这种含有可聚合胺引发体系的优点是,用于丙烯酸酯类医用     

Photocurrent generation in multilayer self-assembly films fabricated from water-soluble poly(phenylene vinylene)

A novel, water-soluble, cationic PPV derivative poly[(2,5-bis(3-bromotrimethylammoniopropoxy)-phenylene-1,4-divinylene)-alt-1,4-(2,5-bis(2-(2-hydroxyethoxy)ethoxy))phenylene vinylene] (BH-PPV) has been synthesized by a Heck coupling reaction. Multilayered assemblies of the BH-PPV and the sodium salt of hexa(sulfobutyl)fullerenes (C(60)-HS) were fabricated successfully by an alternate deposition technique. The multilayer structures were studied by UV/Vis spectroscopy, small angle X-ray diffraction, and atomic force microscopy. The photoinduced charge transfer property of the self-assembled multilayer film was also measured by a three-electrode cell technique. A steady and rapid cathodic 5.5 microA cm(-2) photocurrent response was measured as the irradiation of the multilayer film was switched on and off. Importantly, the response of on/off cycling is prompt and reproducible. A possible mechanism for the electron-transfer process is proposed.     

富烯碳原子簇的石墨层间闭合形成机理

本文提出了富烯碳原子簇的石墨层间闭合形成机理，由该机理推出的许多结果与实验事实符合很好。我们认为碳原子簇自由基的快速淬灭及其淬灭速度是富烯碳原子簇形成及其丰度的决定因素。由此得出富烯碳原子簇在给定实验条件下产生的必然性，并预言不同大小的富烯碳原子簇可以通过优化实验条件选择性地合成。