Hydrothermal synthesis and crystal structure of a layered vanadium oxide with an interlayer metal coordination complex: [Co(phen)3][V10O26]·H2O

A novel compound, [Co(phen)₃][V₁₀O₂₆]·H₂O, was hydrothermally synthesized and characterized by single-crystal X-ray diffraction. This compound crystallizes in the orthorhombic space group Ccca with a=13.447(3), b=29.936(6), c=23.252(5) Å, V=9360(3) Å³, Z=8 and R=0.0285. Data were collected on a Rigaku R-AXIS RAPID IP diffractometer at 293 K in the range of 1.36<θ<24.99°. The structure of the compound consists of vanadium oxide layers, which are built up from the infinite VO₄ chains by corners and edges sharing. The [Co(phen)₃]²⁺ complexes occupy the interlayer space and contact each other via π−π stacking interactions of the phen groups to form infinite one-dimensional chains.     

Determination of gentamycin by synchronous derivative fluorimetry

Use of synchronous first-derivative fluorimetry for determination of gentamycin is described. Gentamycin reacts with acetylacetone and formaldehyde in pH 5.6 HOAc/NaOAc buffer solution to form N-gentamyl-2,6-dimethyl-3,5-diacethyl-1,4-dihydropyridine[I] which is a fluorescent substance. Spectra of [I] and the reagent blank can be separated with synchronous derivative fluorimetry, and gentamycin can be determined directly. The synchronous spectral peaks of [I] and the reagent blank are at 434 and 411 nm, respectively. The first-derivative peak of [I] is at 425 nm. Effects of pH, foreign ions, buffer system, and heating time on the determination of gentamycin have been examined. The linear regression equation of the calibration graph is C=0.0513H-0.0416, with a correlation coefficient of linear regression of 0.9978. C means total potency of gentamycin: U ml(-1); H means peak height in the linear regression equation calibration graph. The linear range for the determination of gentamycin is from 0.00 to 3.00 U ml(-1). Recovery is from 95.06 to 112.0%, R.S.D. of 3.8%. The results determined by the fluorimetric method agreed roughly with those by the microbiological method. The method is simple and has low detection limit.     

Simple <Emphasis Type="Italic">b</Emphasis> ions have cyclic oxazolone structures. A neutralization-reionization mass spectrometric and computational study of oxazolone radicals

The 2-methyloxazol-5-on-2-yl radical (3) and its deuterium labeled analogs were generated in the gas-phase by femtosecond electron-transfer and studied by neutralization-reionization mass spectrometry and quantum chemical calculations. Radical 3 undergoes fast dissociation by ring opening and elimination of CO and CH(3)CO. Loss of hydrogen is less abundant and involves hydrogen atoms from both the ring and side-chain positions. The experimental results are corroborated by the analysis of the potential energy surface of the ground electronic state in 3 using density functional, perturbational, and coupled-cluster theories up to CCSD(T) and extrapolated to the 6-311 ++ G(3df,2p) basis set. RRKM calculations of radical dissociations gave branching ratios for loss of CO and H that were k(CO)/k(H) > 10 over an 80-300 kJ mol(-1) range of internal energies. The driving force for the dissociations of 3 is provided by large Franck-Condon effects on vertical neutralization and possibly from involvement of excited electronic states. Calculations also provided the adiabatic ionization energy of 3, IE(adiab) = 5.48 eV and vertical recombination energy of cation 3(+), RE(vert) = 4.70 eV. The present results strongly indicate that oxazolone structures can explain fragmentations of b-type peptide ions upon electron capture, contrary to previous speculations.     

Indo study of some cyclic carbenes

INDO calculations, with geometry optimization, have been performed on the cyclic carbenes cyclopropenylidene (I) cyclopropylidene (II), and cyclopentadienylidene (III). It is found that all three systems have a singlet ground state and, due to aromaticity, the triplet-singlet energy separations for I and III are particularly large. In addition, for each system, the electronic structure and its influences on geometry and reactivity are discussed.     

High-pressure silicate pyrochlores,Sc2Si2O7 and In2Si2O7

The silicate compounds Sc₂Si₂O₇ and In₂Si₂O₇ have been converted from thortveitite type to pyrochlore type at 1000°C, 120 kbar, with resulting cell constants of 9.287(3) and 9.413(3) Å, respectively. Invariant reflection intensities in the X-ray powder diffraction patterns allowed precise absorption corrections to be made, and refinement of thermal parameters and of the single structural parameter x gave values of 0.4313(21) and 0.4272(15), respectively. The corresponding six-coordinate SiO distances were 1.761(7) and 1.800(5) Å, and the average eight-coordinate distances for ScO₈ and InO₈ were 2.267 and 2.275 Å. Values of structure-refined bond lengths for compounds containing six-coordinate silicon are surveyed, and overall weighted average octahedral distances of 1.782(14) Å for SiO and 2.520(18) Å for OO are derived. Pyrochlore phases were not produced from rare-earth disilicate or monosilicate phases subjected to the same reaction conditions as the Sc and In compounds.     

Fluorous Synthesis of Biaryl-Substituted Proline Analogs by 1,3-Dipolar Cycloaddition and Suzuki Coupling Reactions

A solution-phase synthesis of bicyclic prolines containing four points of diversity has been developed by a two-step synthesis involving 1,3-dipolar cycloaddition of perfluoroalkylsulfonyl-protected hydroxybenzaldehydes followed by Pd-catalyzed Suzuki coupling reaction of fluorous sulfonates with boronic acids. Both reactions are conducted under microwave irradiation and reaction mixtures are purified by solid-phase extractions without performing chromatography.     

Mixed-valent diruthenium diphosphonate with kagomé structure

This paper reports the first example of diruthenium phosphonate with kagomé structure, namely, [NH3(CH2)4NH3][Ru2(hedpH(0.5))2].2H2O (hedp = 1-hydroxyethylidenediphosphonate). The compound contains kagomé layers that are linked by very strong hydrogen bonds into a nanoscale kagomé structure. Ferromagnetic interactions are mediated between the paramagnetic diruthenium units.     

Reversible binding of the HPLC6 isoform of type I antifreeze proteins to ice surfaces and the antifreeze mechanism studied by multiple quantum filtering-spin exchange NMR experiment

Antifreeze proteins (AFPs) protect organisms from freezing damage by inhibiting the growth of seed-ice crystals. It has long been hypothesized that irreversible binding of AFPs to ice surfaces is responsible for inhibiting the growth of seed-ice crystals as such a mechanism supports the popularly accepted Kelvin effect for the explanation of local freezing-point depression. However, whether the binding is reversible or irreversible is still under debate due to the lack of direct experimental evidence. Here, we report the first direct experimental result, by using the newly developed multiple quantum (MQ) filtering-spin exchange NMR experiment, that shows that the binding of HPLC6 peptides to ice surfaces is reversible. It was found that the reversible process can be explained by the model of monolayer adsorption. These results suggest that the Kelvin effect is not suitable for explaining the antifreeze mechanism, and direct interactions between the peptides and the ice-surface binding sites are the driving forces for the binding of AFPs to ice surfaces. We propose that there exists a concentration gradient of AFP from an ice-binding surface to the solution due to the affinity of ice surfaces to AFPs. This concentration gradient creates a dense layer of AFP in contact with the ice-binding surface, which depresses the local freezing point because of the colligative property, but not the Kelvin effect.     

Comparative Study on the Structure of Water in Reverse Micelles Stabilized with Sodium Bis(2-ethylhexyl) Sulfosuccinate or Sodium Bis(2-ethylhexyl) Phosphate in n-Heptane

The microstructure of water solubilized in H(2)O/surfactant/n-heptane ternary systems has been investigated by employing (1)H-NMR and FT-IR spectroscopic techniques. Two reverse micellar systems were prepared and studied, i.e., sodium bis(2-ethylhexyl) sulfosuccinate in n-heptane (H(2)O/AOT/n-heptane) and sodium bis(2-ethylhexyl) phosphate in n-heptane (H(2)O/NaDEHP/n-heptane). (1)H-NMR data showed that the chemical shift of water protons for the AOT and NaDEHP reverse micelles varied downfield and upfield, respectively, with an increase of the water content. The opposite shift directions with increasing water content are interpreted as due to a composition change of the solubilized water associated with head-groups and sodium counterions in reverse micellar systems. On the basis of deconvolution results of FT-IR spectra, a four-component model is proposed to interpret the FT-IR and (1)H-NMR results. Copyright 2000 Academic Press.     

Simple thiazocine-2-acetic acid derivatives via ring-closing metathesis

A new protocol for synthesis of 2-heterocylylacetic acid derivatives involving conjugate addition of allyl mercaptan to an acrylate containing a tethered olefinic site followed by RCM (ring-closing metathesis) is described. In this series, sulfanyl derivatives were unreactive, while sulfoxide and sulfone analogues provided the corresponding thiazocines in fair to excellent yields. Use of the sulfoxide oxidation state as a protecting group for sulfides inert to RCM is demonstrated also. Thus, oxidation of sulfide 9 [N-allyl-N-[2-(allylthio)-4-(1H-indol-1-yl)-4-oxobutyl]-4-methylbenzenesulfonamide] followed by cyclization yielded the corresponding thiazocine sulfoxide 12. Deprotection (deoxygenation) of 12 was accomplished using Lawesson's reagent, producing 1-[[4-[4-(methylphenyl)sulfonyl]-3,4,5,8-tetrahydro-2H-1,4-thiazocin-2-yl]acetyl]-1H-indole (21) in 67% unoptimized yield.