Calix[4]arene-based fluorescent probe and the adsorption capacity of its electrospun nanofibrous film for the cesium cation as an adsorbent

Calix[4]arene-based cation receptor 1 has been synthesised by following a multi-step synthetic procedure. The fluorescence properties of 1 upon the addition of various metal ions were investigated by fluorescence spectroscopy. As a result, it was revealed that 1 displayed dramatic quenching effect upon the exposure to Cs⁺. In contrast, no significant quenching effects were observed upon the addition of other metal ions such as Li⁺, Na⁺, K⁺, Mg²⁺, Ca²⁺, Sr²⁺, Ag⁺, Zn²⁺ and Ni²⁺. Compound 1 was also found by Job plot to form a 1:1 complex with Cs⁺. In addition, we also prepared 1-embedded electrospun nanofibrous film (NF-1) as an adsorbent for Cs⁺. NF-1 is proved to adsorb Cs⁺ effectively from an aqueous solution, indicating that it would be usefully utilised as an adsorbent to remove Cs⁺.     

Structure of Abelian rings

Let R be a ring with identity. We use J(R); G(R); and X(R) to denote the Jacobson radical, the group of all units, and the set of all nonzero nonunits in R; respectively. A ring is said to be Abelian if every idempotent is central. It is shown, for an Abelian ring R and an idempotent-lifting ideal N ? J(R) of R; that R has a complete set of primitive idempotents if and only if R/N has a complete set of primitive idempotents. The structure of an Abelian ring R is completely determined in relation with the local property when X(R) is a union of 2; 3; 4; and 5 orbits under the left regular action on X(R) by G(R): For a semiperfect ring R which is not local, it is shown that if G(R) is a cyclic group with 2 ∈ G(R); then R is finite. We lastly consider two sorts of conditions for G(R) to be an Abelian group.     

On minimizers for the isotropic–nematic interface problem

In this paper, we investigate the structure and stability of the isotropic-nematic interface in 1-D. In the absence of the anisotropic energy, the uniaxial solution is the only global minimizer. In the presence of the anisotropic energy, the uniaxial solution with the homeotropic anchoring is stable for \(L_2<0\) and unstable for \(L_2>0\). We also present many interesting open questions, some of which are related to De Giorgi conjecture.     

Flow measurement around a model ship with propeller and rudder

For the design of hull forms with better resistance and propulsive performance, it is essential to understand flow characteristics, such as wave and wake development, around a ship. Experimental data detailing the local flow characteristics are invaluable for the validation of the physical and numerical modeling of computational fluid dynamics (CFD) codes, which are recently gaining attention as efficient tools for hull form evaluation. This paper describes velocity and wave profiles measured in the towing tank for the KRISO 138,000 m³ LNG carrier model with propeller and rudder. The effects of propeller and rudder on the wake and wave profiles in the stern region are clearly identified. The results contained in this paper can provide an opportunity to explore integrated flow phenomena around a model ship in the self-propelled condition, and can be added to the International Towing Tank Conference benchmark data for CFD validation as the previous KCS and KVLCC cases.     

Dynamic dip testing as a method to assess the condensate drainage behavior from the air-side surface of compact heat exchangers

A new method to assess the condensate drainage behavior of the air-side surface of compact heat exchangers—dynamic dip testing—is introduced. The new method is shown to provide highly repeatable data for real-time drainage. Results from experiments with more than 20 flat-tube and round-tube-and-fin heat exchangers are presented, and the data clearly show geometrical effects such as the impact of the tube type on condensate drainage. By comparing the results from dip testing to wind-tunnel experiments for the same heat exchangers, we find dip testing can serve as a powerful tool for assessing the condensate retention behavior. The coils retaining the most and the least condensate in a steady-state wind-tunnel test, likewise held the most and the least in a dip test. However, different amounts of water are retained on the air-side surface during dip tests and wind-tunnel tests. A model based on gravity, surface tension and drag effects is developed to help understand and predict the drainage behavior of heat exchangers. The new model and experimental approach are useful in screening heat exchangers for condensate retention and for assessing off-cycle drainage behavior.     

Thermal analysis of the roll in the strip casting process

Coiled strip can be directly produced through the twin-roll strip casting process from the melt by incorporating casting and hot rolling together into a single step. In this unique process, the strip formation from the molten metal critically relies upon the casting rolls. Thus, the design of the rolls is extremely essential. The coupled heat transfer and deformation analysis of the casting roll is carried out in a two-dimensional numerical model, using a finite element program (MARC) to examine the thermal stress and displacement. The effects of several factors such as the nickel overlay thickness on the roll surface, the casting speed, and the roll diameter on thermal characteristics are investigated.     

ChemInform Abstract: Crystal Structure of Potassium Sodium Heptahydrogen Hexamolybdocobaltate(III) Octahydrate: An Extra‐Protonated B‐Series Anderson‐Type Heteropolyoxidometalate.

KNa[Co^III(OH)₇{Mo₆O₁₇}] ·8H₂O is obtained by ion‐exchange from a solution of K₃ [Co(μ₃‐OH)₆Mo₆O₁₈] ·7H₂O at ≈pH 1.4 using Amberlite IR120 ion exchange resin followed by concentrating the solution in a hot water bath.     

Two New Cytotoxic Spirostane‐Steroidal Saponins from the Roots of Bletilla striata

Two new spirostane‐steroidal saponins, bletilnoside A ( 1 ) and bletilnoside B ( 2 ), together with five known compounds, 3 – 7 , were isolated from the roots of Bletilla striata (Thunb .) Reichb . F. The structures of the new compounds were determined based on their 1D‐ and 2D‐NMR spectral data. The isolated compounds 1 – 7 were tested for cytotoxicity against four human tumor cells (A549, SK‐OV‐3, SK‐MEL‐2, and HCT15) in vitro using a sulforhodamin B bioassay, and compounds 1, 2 , and 5 showed significant cytotoxicities against all tested tumor cell lines with IC₅₀ values ranging from 3.98±0.16 to 12.10±0.40 μM .