On-chip erythrocyte deformability test under optical pressure

This paper presents a novel method for an on-chip erythrocyte deformability test under optical pressure, especially to enhance the level of sensitivity with respect to the detection of cancerous diseases. To demonstrate the performance and sensitivity of the combined method, we introduce the concept of transit velocity, a modified elongation index, and shape recovery time of individual erythrocytes in a strictly confined region (2 microm deep, 4 microm wide, and 100 microm long). Finally, we investigate a synergy or convergence effect due to the combination of these parameters for in situ detection of cancerous diseases under optical pressure.     

Time-resolved resonance Raman investigation of the 2-fluorenylnitrenium ion reactions with C8 guanosine derivatives

A nanosecond time-resolved resonance Raman (ns-TR3) spectroscopic study of the reactions of the 2-fluorenylnitrenium ion with several C8-substituted guanosine derivatives is reported. The TR3 spectra show that the 2-fluorenylnitrenium ion reacts with the C8-substituted guanosine derivatives (C8-methylguanosine and C8-bromoguanosine) to produce C8 intermediates with the methyl and bromine moieties still attached to the intermediate species at the C8 position. The C8-bromoguanosine species was observed to be less reactive toward the 2-fluorenylnitrenium ion compared to the guanosine and C8-methylguanosine species. Comparison of the TR3 spectra to the results obtained from density functional theory calculations was used to characterize the C8 intermediates observed to learn more about their structure and properties. The implications of these results for the chemical reactivity of arylnitrenium ions toward substituted guanosine derivatives are briefly discussed.     

Applications of phosphine-functionalised polymers in organic synthesis

This tutorial review deals with recent advances in the use of phosphine-functionalised polymers in organic synthesis. In the first part of the review, some recent applications of polymer-supported palladium catalysts are reviewed, particularly recyclable catalysts for C-C and C-X bond formation with aryl bromide and chloride substrates. In the second half, novel applications of phosphine-functionalised polymers as reagents, scavengers, organocatalysts and linkers in organic chemistry are presented. Emphasis is placed on the synthesis of biologically active molecules.     

Intramolecular cyclopropanation of unsaturated terminal epoxides and chlorohydrins

Lithium 2,2,6,6-tetramethylpiperidide (LTMP)-induced intramolecular cyclopropanation of unsaturated terminal epoxides provides an efficient and completely stereoselective entry to bicyclo[3.1.0]hexan-2-ols and bicyclo[4.1.0]heptan-2-ols. Further elaboration of C-5 and C-6 stannyl-substituted bicyclo[3.1.0]hexan-2-ols via Sn-Li exchange/electrophile trapping or Stille coupling generates a range of substituted bicyclic cyclopropanes. An alternative straightforward cyclopropanation protocol using a catalytic amount of 2,2,6,6-tetramethylpiperidine (TMP) allows for a convenient (1 g-7.5 kg) synthesis of bicyclo[3.1.0]hexan-2-ol and other bicyclic adducts. The synthetic utility of this chemistry has been demonstrated in a concise asymmetric synthesis of (+)-beta-cuparenone. The related unsaturated chlorohydrins also undergo intramolecular cyclopropanation via in situ epoxide formation.     

Characterization of pore structure in metal-organic framework by small-angle X-ray scattering

MOF-5-like crystals were studied by small-angle X-ray scattering (SAXS) to reveal, both quantitatively and qualitatively, their real structural details, including pore surface characteristics, pore shape, size distribution, specific surface area (SSA), spatial distribution, and pore-network structure. A combined SAXS and wide-angle X-ray scattering (WAXS) experiment was conducted to investigate the variation of the pore structure with the MOF-5 crystalline phase produced at different cooling rates. The SSA of the MOF-5 crystals synthesized herein spanned a broad range from approximately 3100 to 800 m2/g. The real pore structures were divided into two regimes. In regime I the material consisted mainly of micropores of radius approximately 8 A as well as mesopores of radius 120 approximately 80 A. The structure in regime II was a fractal network of aggregated mesopores with radius >or=32 A as the monomer, reducing SSA and hydrogen uptake capacity at room temperature. The two regimes can be manipulated by controlling the synthesis parameters. The concurrent evolution of pore structure and crystalline phase during heating for solvent removal was also revealed by the in-situ SAXS/WAXS measurement. The understanding of the impact of the real pore structure on the properties is important to establish a favorable synthetic approach for markedly improving the hydrogen storage capacity of MOF-5.     

Spectroscopic detection and theoretical confirmation of the role of Cr2(CO)5(C5R5)2 and .Cr(CO)2(ketene)(C5R5) as intermediates in carbonylation of N=N=CHSiMe3 to O=C=CHSiMe3 by .Cr(CO)3(C5R5) (R = H, CH3)

Conversion of N=N=CHSiMe3 to O=C=CHSiMe3 by the radical complexes .Cr(CO)3C5R5 (R = H, CH3) derived from dissociation of [Cr(CO)3(C5R5)]2 have been investigated under CO, Ar, and N2 atmospheres. Under an Ar or N2 atmosphere the reaction is stoichiometric and produces the Cr[triple bond]Cr triply bonded complex [Cr(CO)2(C5R5)]2. Under a CO atmosphere regeneration of [Cr(CO)3(C5R5)]2 (R = H, CH3) occurs competitively and conversion of diazo to ketene occurs catalytically as well as stoichiometrically. Two key intermediates in the reaction, .Cr(CO)2(ketene)(C5R5) and Cr2(CO)5(C5R5)2 have been detected spectroscopically. The complex .Cr(13CO)2(O=13C=CHSiMe3)(C5Me5) has been studied by electron spin resonance spectroscopy in toluene solution: g(iso) = 2.007; A(53Cr) = 125 MHz; A(13CO) = 22.5 MHz; A(O=13C=CHSiMe3) = 12.0 MHz. The complex Cr2(CO)5(C5H5)2, generated in situ, does not show a signal in its 1H NMR and reacts relatively slowly with CO. It is proposed to be a ground-state triplet in keeping with predictions based on high level density functional theory (DFT) studies. Computed vibrational frequencies are also in good agreement with experimental data. The rates of CO loss from 3Cr2(CO)5(C5H5)2 producing 1[Cr(CO)2(C5H5)]2 and CO addition to 3Cr2(CO)5(C5H5)2 producing 1[Cr(CO)3(C5H5)]2 have been measured by kinetics and show DeltaH approximately equal 23 kcal mol(-1) for both processes. Enthalpies of reduction by Na/Hg under CO atmosphere of [Cr(CO)n(C5H5)]2 (n = 2,3) have been measured by solution calorimetry and provide data for estimation of the Cr[triple bond]Cr bond strength in [Cr(CO)2(C5H5)]2 as 72 kcal mol(-1). The complex [Cr(CO)2(C5H5)]2 does not readily undergo 13CO exchange at room temperature or 50 degrees C implying that 3Cr2(CO)5(C5H5)2 is not readily accessed from the thermodynamically stable complex [Cr(CO)2(C5H5)]2. A detailed mechanism for metalloradical based conversion of diazo and CO to ketene and N2 is proposed on the basis of a combination of experimental and theoretical data.     

The sixteen CB(11)H(n)Me(12-n)(-) anions with fivefold substitution symmetry: anodic oxidation and electronic structure

The 15 symmetrically methylated derivatives of the CB11H12(-) anion (1a) have been synthesized and found to vary greatly in ease of oxidation. Cyclic voltammetry in liquid SO2 yielded fully reversible oxidation potentials for five of those that have no adjacent unsubstituted vertices in positions 7-12; three others showed some indication of reversibility. The anions 1a-16a and the Jahn-Teller distorted neutral radicals 1r-16r have been characterized by ab initio and density functional theory calculations. In the state average CASSCF(13,12)/6-31+G* approximation, the ground state potential energy surface of 1r contains five symmetry-related pairs of minima. The computational results account for the reversible redox potentials very well when the solvent is included explicitly (RI-DFT(BP)/TZVP, COSMO). For display and for a semiquantitative understanding of methyl substituent effects in terms of perturbation theory, the molecular orbitals of 1a have been expressed in the symmetry-adapted cluster basis. The results serve as an underpinning for a set of additive empirical increments for redox potential prediction. Relative to the usual hydrogen standard, a single methyl group facilitates oxidation by approximately 50, 70, 70, and 10 mV in positions 1, 2, 7, and 12, respectively. This electron donor effect on the redox potential is due to a contribution, whereas those of (inductive and direct field) type are negligible.     

Got Sulfate? Luring Axons This Way and That

Glycosaminoglycans are sulfated in complex and changing patterns that affect neural development. These sugars mediate interactions between macromolecules, and their biological contributions are of high interest. In this issue of Chemistry & Biology, Shipp and Hsieh-Wilson describe microarrays to probe these complex modifications.     

Linear solvation energy parameters for model tropospheric aerosol surfaces

Excited-state absorption spectra for several coumarin derivatives adsorbed to aerosol particles provide linear solvation energy (LSE) relationships for the aerosol surfaces. This study focuses on NaCl and (NH4)2SO(4) particles as models for tropospheric aerosol. We investigate several others, including NH(4)Cl, NaBr, KI, Na(2)SO(4), NaNO(3), Al(2)O3, and CaCO(3), to establish trends and understand the factors that control polarity for surfaces. The Kamlet-Taft dipolarity/polarizability parameter, pi*, for these particles ranges from 0.73 to 1.69. The values are high compared to most homogeneous molecular solvents and are attributable to ion-dipole forces, especially at defect sites. We also find that the smaller values of pi* (1.01 for (NH4)2SO(4) and 0.73 for NH(4)Cl) correlate with appreciable hydrogen bond donor acidity in the surface (alpha = 0.23 and 1.06, respectively). Strong hydrogen bonds with the surface lead to a drop in overall polarity either by making interaction with very polar defect sites less likely or orienting the probe molecule away from the surface. Adsorbed water layers mainly alter the alpha value of the surface, but can have indirect effects on pi* by changing the interaction of the adsorbed molecule with the surface.