Large-volume stacking in capillary electrophoresis using pH hysteresis of the electroosmotic flow in a bare fused-silica capillary

For large-volume stacking with the electroosmotic flow pump (LVSEP) in capillary electrophoresis of anionic analytes it is required that the electroosmotic mobility (EOM) should be smaller than the magnitudes of the effective mobilities of the analytes. When a fused-silica capillary is treated with an acidic solution, the silanoate group on the silica surface is neutralized to silanol and the EOM is suppressed. Due to the slow deprotonation equilibrium of the silanol group at an intermediate pH, this reduced EOM can be retained during a number of electrophoresis runs. Using a bare fused-silica capillary preconditioned with 0.01 M HCl, successful LVSEP at pH 6.0 was achieved for weakly acidic compounds with two orders of magnitude enhancements in the concentration sensitivity. The repeatability in migration times of ten analytes stacked by LVSEP in a single day was excellent with the relative standard deviation (RSD) less than 1% (n = 6). The day-to-day repeatability was also excellent with RSD less than 3% (n = 3 x 6) when the capillary was preconditioned each day.     

Dendrimers as potential drug carriers; encapsulation of acidic hydrophobes within water soluble PAMAM derivatives

This paper describes the synthesis of three neutral water soluble poly(amidoamine) (PAMAM) dendrimer derivatives. The ability of the two larger dendrimers to bind small acidic hydrophobic molecules is reported. Spectroscopic data and pH behaviour suggested that the acidic hydrophobes were forming stable ion pairs with the dendrimer's internal, basic tertiary nitrogens. With respect to forming 1:1 and 2:1 substrate/dendrimer complexes, both of the larger dendrimers were equally efficient at binding. All dendrimer/substrate complexes were completely miscible with water in all proportions (i.e. infinitely water soluble). When the bound substrates are drug moieties, then the resulting complexes could be considered as potential drug delivery systems. Flow calorimetry demonstrated that the dendrimers were able to release their hydrophobic guests when in contact with a biological cell.     

Studies on poly(iminomethylenes)

A variety of simple alkyl and aryl isocyanides have been polymerized using 0.5% NiCl₂ in ethanol as a catalyst. The resulting poly(iminomethylenes) have been characterized by carbon-13 NMR spectroscopy and their polystyrene-equivalent molecular weights have been determined by gel permeation chromatography. Straight chain aliphatic isocyanides having from three to ten carbon atoms in the chain form readily solyble polymers having molecular weights (M_w) in the general range 10,000 to 30,000. Neopentyl isocyanide unlike tert-butyl isocyanide forms an insoluble polymer. A number of new soluble aryl isocyanide polymers have been obtained. However, aryl isocyanides having a single alkyl substituent (CH₃, C₂H₅, CF₃) in the ortho position give only insoluble polymers, whereas aryl isocyanides having alkyl substituents in both ortho positions (e.g., 2,6-(CH₃)₂C₆H₃NC and 2,4,6-(CH₃)₃C₆H₂NC) fail to polymerize under these conditions. The highest molecular weight soluble aryl isocyanide homopolymer is obtained from 3-CH₃OC₆H₄NC(M_w = 26,000). The trimethylsilyl substituted isocyanide (CH₃)₃SiCH₂CH₂NC has been obtained from LiCH₂NC and (CH₃)SiCH₂Cl and gives a brown soluble homopolymer with a molecular weight (M_w) of 19,000.     

Detection of vibration-rotational band 5-0 of 12C16O X 1sigma+ with cavity ringdown absorption near 0.96 microm

We have recorded extremely weak absorption in the overtone band 5-0 of 12C16O X 1sigma+ near 0.96 microm with cavity ringdown spectroscopy; the light source was a Raman-shifted dye laser pumped with a frequency-doubled Nd:YAG laser. This band shows lines in branch P to be much more intense than corresponding lines in branch R, in contrast to all lower overtone bands v-0 (v = 1-4). This reversal in relative intensity is explained quantitatively in terms of a radial function for the electric dipolar moment of CO. We have estimated absorption line strengths for P3-P18 in band 5-0 of 12C16O; these strengths are consistent with a pure vibrational matrix element <5/p(x)/0> = (3.6 +/- 0.3) x 10(-36) C m of the electric dipolar moment p(x), a Herman-Wallis coefficient C0(5) of about -0.1, and a band strength of (5.1 +/- 1.3) x 10(-29) m at 293 K.     

The oxidation of water by cerium(IV) catalysed by nanoparticulate RuO2 on mesoporous silica

Mesoporous silicates are prepared by templating on the hexagonal (H1) mesophase of surfactant bipyridine complexes of ruthenium(II) using a true liquid-crystal templating approach. On calcination, the surfactant template is removed except for the central metal ion that is oxidised, forming nanoparticles of RuO2 that deposit within the pores. RuO2 is a known oxidation catalyst and, despite its anhydrous nature in these silicates, is found to be very active in catalyzing the oxidation of water by acidic CeIV.     

Kinetics of the thermal unimolecular decomposition of hex-1-ene-3-yne. Heat of formation and resonance stabilization energy of the 3-ethenylpropargyl radical

The thermal unimolecular decomposition of hex-1-ene-3-yne (HEY) has been investigated over the temperature range 949–1230 K using the technique of very low-pressure pyrolysis (VLPP). One reaction pathway is the expected C₅? C₆ bond fission to form the resonance-stabilized 3-ethenylpropargyl radical. There is a concurrent process producing molecular hydrogen which probably occurs via the intermediate formation of hexatrienes and cyclohexa-1,3-diene. RRKM calculations yield the extrapolated high-pressure rate parameters at 1100 K given by the expressions 10^16.0±0.3 exp(?300.4 ± 12.6 kJ mol^?1/RT) s^?1 for bond fission and 10^13.2+0.4 exp(?247.7 ± 8.4 kJ mol^?1/RT) for the overall formation of hydrogen. The A factors were assigned from the results of previous studies of related alkynes, alkenes, and alkadienes. The activation energy for the bond fission reaction leads to ΔH [H₂CCHCC?H₂] = 391.9, DH [H₂CCHCCCH₂? H] = 363.3, and a resonance stabilization energy of 56.9 ± 14.0 kJ mol^?1 for the 3-ethenylpropargyl radical, based on a value of 420.2 kJ mol^?1 for the primary C? H bond dissociation energy in alkanes. Comparison with the revised value of 46.6 kJ mol^?1 for the resonance energy of the unsubstituted propargyl radical indicates that the ethenyl substituent (CH₂?CH) on the terminal carbon atom has only a small effect on the propargyl resonance energy. © John Wiley & Sons, Inc.     

Argentomctric coulomelric titration of thioacetamide

The coulometric determination of thioacetamide (TAA) with electrogenerated silver is described. The titration is done in a solution 0.1M in both ammonia and sodium hydroxide, and the end-point is detected potentiometncally with a silver-silver sulphide electrode. On repeat analyses of approx. 2-mg samples of TAA an average error of -04% (relative standard deviation 0.25%) was obtained. Important steps in the procedure include cleaning the silver generating electrode in nitric acid before each titration, purging well with nitrogen to remove oxygen, and not using too large a sample.     

Immobilized cobalt/rhodium heterobimetallic nanoparticle-catalyzed silylcarbocylization and carbonylative silylcarbocyclization of 1,6-enynes

Reaction of 1,6-enynes with a hydrosilane in the presence of immobilized cobalt/rhodium bimetallic nanoparticles gives 2-methyl-1-silylmethylidene-2-cyclopentanes in the absence of carbon monoxide and 2-formylmethyl-1-silylmethylidene-2-cyclopentanes under 1 atm of carbon monoxide, respectively. [reaction: see text]     

Facile generation of platinum(IV) compounds with mixed labile moieties. Hydrogen peroxide oxidation of platinum(II) to platinum(IV) compounds

Hydrogen peroxide oxidation of platinum(II) compounds containing labile groups such as Cl, OH, and alkene moieties has been carried out and the products characterized. The reactions of [Pt^II (X)₂ (N–N)] (X = Cl, OH, X₂ = isopropylidenemalorate (ipm); N–N 2,2-dimethyl-1,3-propanediamine [(dmpda), N-isopropyl-1,3-propanediamine (ippda)] with hydrogen peroxide in an appropriate solvent at room temperature affords [Pt^IV (OH)(Y)(X)₂(N–N)] (Y = OH, OCH₃). The crystal structures of [Pt^IV(OH)(OCH₃)(Cl)₂(dmpda)]·2H₂O (P-1 bar, a = 6.339(2) Å , b = 9.861(1) Å, c = 11.561(1) Å, a = 92.078(9)°, β = 104.78(1)°, γ=100.54(1)°, V = 684.3(2) ų, Z = 2R = 0.0503) and [Pt^IV(OH)₂(ipm)(ippda)]·3H₂O (C 2/c, a = 27.275(6) Å, b=6.954(2) Å, c = 22.331(4) Å, β = 118.30(2)°, V = 3729(2) ų, Z = 8, R = 0.0345) have been solved and refined. The local geometry around the platinum(IV) atom approximates to a typical octahedral arrangement with two added groups (OH and OCH₃; OH and OH) in a transposition. The platinum(IV) compounds with potential labile moieties may be important intermediate species for further reactions.