351 nm, 0.7 ns laser damage thresholds of monomeric liquid-crystalline systems

The 351 nm laser-damage thresholds (at 0.7 nm pulse length) of monomeric liquid crystals are reported and results from aromatic-core samples are compared with those from fully saturated systems. The role of π-electron conjugation is examined and identified as the key cause for laser damage. For UV laser compatibility of devices, the damage behaviour of an alignment-layer polymer (nylon 6/6) was also investigated.     

Structure and defects at Y2BaCuO5 interfaces in melt-textured YBa2Cu3Ox superconductors

Y₂BaCuO₅ (211) inclusions are prominent microstructural features found in melt-textured YBa₂Cu₃O_x (123) superconductors. These particles are of interest because the 123/211 interfaces and the interface-associated defects have been proposed to be flux pinning centers. In addition, the 211 particles are believed to be heterogeneous nucleation centers of dislocation which can increase the critical current density of 123. Unfortunately, only limited studies have been performed on these particles to ascertain their roles in flux pinning. In this investigation, 211 particles, the interfacial structure and defects in undeformed and mechanically deformed melt-textured 123 have been studied by transmission electron microscopy. It was found that there appears to be a preferred orientation between large oblong 211 particles and the 123 matrix. In addition, while the 123/211 interfaces in undeformed 123 are sharp and relatively undistorted, the interfaces in deformed 123 samples are much thicker. Also, the distribution of strained regions and dislocations around oblong 211 particles in undeformed 123 is nonuniform; the interfaces of low surface curvature are relatively free of defects while the surfaces of high curvature are abundant in dislocations. In contrast, the 123/211 interfaces in deformed 123 samples contain high density of dislocations regardless of interface curvature.     

Structural and electrical properties of crystalline (1−x)Ta2O5−xTiO2 thin films fabricated by metalorganic decomposition

Polycrystalline (1−x)Ta₂O₅−xTiO₂ thin films were formed on Si by metalorganic decomposition (MOD) and annealed at various temperatures. As-deposited films were in the amorphous state and were completely transformed to crystalline after annealing above 600 °C. During crystallization, a thin interfacial SiO₂ layer was formed at the (1−x)Ta₂O₅−xTiO₂/Si interface. Thin films with 0.92Ta₂O₅–0.08TiO₂ composition exhibited superior insulating properties. The measured dielectric constant and dissipation factor at 1 MHz were 9 and 0.015, respectively, for films annealed at 900 °C. The interface trap density was 2.5×10¹¹ cm⁻² eV⁻¹, and flatband voltage was −0.38 V. A charge storage density of 22.8 fC/μm² was obtained at an applied electric field of 3 MV/cm. The leakage current density was lower than 4×10⁻⁹ A/cm² up to an applied electric field of 6 MV/cm.     

Comments on structure functions at low-x

We present further analysis of the structure functions at low-x using the approximate solutions of Altarelli-Parisi equations recently reported by us. We also compare our results with non-perturbative and non-linear evolutions.     

Production of slow muonic hydrogen isotopes in vacuum

Muonic hydrogen isotopes (μ⁻ p, μ⁻ d, and μ⁻t) are simple quantum mechanical systems ideally suited for studies of numerous fundamental phenomena in electroweak and strong interactions as well as in applied areas such as muon chemistry or muon catalyzed fusion. Emission of muonic hydrogen isotopes into vacuum helps to overcome the limitations which are normally imposed on conventional investigations with gaseous and liquid targets. A proof of principle experiment for this new technique was performed at TRIUMF last year. Negative muons with 30 MeV/c momentum were stopped in a thin film of solid hydrogen and produced very low energy μ⁻d in vacuum. The distribution center of the normal velocity components of emitted μ⁻d atoms was measured to be ∼1 cm/μs. The yield of μ⁻d in vacuum is an increasing function of H₂ film thickness δ up to a value of δ≥1 mm.     

Synthesis of poly-yne polymers containing transition metals,disilane, disiloxane and phosphine groups in the main chain

The synthesis and characterization of metal poly-yne polymers containing disilane, disiloxane and phosphine groups in the main chain are described. The platinum and palladium poly-yne polymers were synthesized by polycondensation reactions between a metal chloride and an α, ω-bisethynyl complex in amines in the presence of cuprous iodide as a catalyst. The nickel poly-yne polymers were synthesized by an alkynyl ligand exchange reaction between a nickel acetylide and an α, ω-bisethynyl complex in diethylamine in the presence of cuprous iodide as a catalyst. The reaction of the platinum poly-yne polymer, containing disiloxane groups in the main chain, with copper (I) salts afforded adducts of η-²-bonded σ-acetylide polymer complexes. The reactions of the palladium poly-yne polymer, containing phosphine groups in the main chain, with transition-metal carbonyl complexes afforded polymer complexes which have phosphorus in the main chain-transition-metal bonds. A concentrated solution of the platinum poly-yne polymer containing disiloxane groups in the main chain forms a lyotropic liquid crystal in dichloromethane or 1, 2-dichloroethane.     

Measurement of the transverse Doppler shift using a stored relativistic7Li+ ion beam

We have performed for the first time precision spectroscopy on a coasting fast⁷Li⁺ ion beam in a storage ring. The ion beam moving with 6.4% speed of light was first electron cooled and then merged with two counterpropagating laser beams acting on two different hyperfine transitions sharing a common upper level (λ-system). One laser was frequency locked to thea ₃ ¹²⁷J₂ hfs frequency component established as a secondary frequency standard at 514 nm. The second laser was tuned over theλ-resonance, which was recorded relative to¹²⁷J₂ hfs components. This experiment is sensitive to the time dilation in fast moving frames and will lead to new limits for the verification of special relatively. The present status of the experiment and perspectives in accuracy are discussed.     

An interpolation approximation for the GI/G/1 queue based on multipoint Padé approximation

The performance evaluation of many complex manufacturing, communication and computer systems has been made possible by modeling them as queueing systems. Many approximations used in queueing theory have been drawn from the behavior of queues in light and heavy traffic conditions. In this paper, we propose a new approximation technique, which combines the light and heavy traffic characteristics. This interpolation approximation is based on the theory of multipoint Padé approximation which is applied at two points: light and heavy traffic. We show how this can be applied for estimating the waiting time moments of the ^GI/G/1 queue. The light traffic derivatives of any order can be evaluated using the MacLaurin series analysis procedure. The heavy traffic limits of the ^GI/G/1 queue are well known in the literature. Our technique generalizes the previously developed interpolation approximations and can be used to approximate any order of the waiting time moments. Through numerical examples, we show that the moments of the steady state waiting time can be estimated with extremely high accuracy under all ranges of traffic intensities using low orders of the approximant. We also present a framework for the development of simple analytical approximation formulas. This revised version was published online in June 2006 with corrections to the Cover Date.