Bucillamine Inhibits UVB-Induced MAPK Activation and Apoptosis in Human HaCaT Keratinocytes and SKH-1 Hairless Mouse Skin

Ultraviolet B (UVB) radiation is known as a culprit in skin carcinogenesis. We have previously reported that bucillamine (N-[2-mercapto-2-methylpropionyl]-L-cysteine), a cysteine derivative with antioxidant and anti-inflammatory capacity, protects against UVB-induced p53 activation and inflammatory responses in mouse skin. Since MAPK signaling pathways regulate p53 expression and activation, here we determined bucillamine effect on UVB-mediated MAPK activation in vitro using human skin keratinocyte cell line HaCaT and in vivo using SKH-1 hairless mouse skin. A single low dose of UVB (30 mJ cm⁻²) resulted in increased JNK/MAPK phosphorylation and caspase-3 cleavage in HaCaT cells. However, JNK activation and casaspe-3 cleavage were inhibited by pretreatment of HaCaT cells with physiological doses of bucillamine (25 and 100 µm ). Consistent with these results, bucillamine pretreatment in mice (20 mg kg⁻¹) inhibited JNK/MAPK and ERK/MAPK activation in skin epidermal cells at 6–12 and 24 h, respectively, after UVB exposure. Moreover, bucillamine attenuated UVB-induced Ki-67-positive cells and cleaved caspase-3-positive cells in mouse skin. These findings demonstrate that bucillamine inhibits UVB-induced MAPK signaling, cell proliferation and apoptosis. Together with our previous report, we provide evidence that bucillamine has a photoprotective effect against UV exposure.     

谷氨酸钠溶液514nm激光拉曼光谱受环境光影响的研究

探讨了环境光的存在对谷氨酸钠溶液的514 nm绿色激光激发的拉曼光谱的影响.研究表明不同的环境光、自然光和室内荧光灯光均会对514 nm激光拉曼光谱产生干扰,存在着特征干扰峰.自然阳光干扰较小;而荧光灯光表现为1127、2107 cm-1和2170 cm-1等3个明显尖锐的脉冲峰,不能忽略.建议在进行谷氨酸钠溶液514 nm绿色激光拉曼光谱检测时,须在暗室或暗罩中进行,以完全隔离环境光的影响.     

Module-Designed Carbon-Coated Separators for High-Loading,High-Sulfur-Utilization Cathodes in Lithium–Sulfur Batteries

Lithium–sulfur batteries have great potential as next-generation energy-storage devices because of their high theoretical charge-storage capacity and the low cost of the sulfur cathode. To accelerate the development of lithium–sulfur technology, it is necessary to address the intrinsic material and extrinsic technological challenges brought about by the insulating active solid-state materials and the soluble active liquid-state materials. Herein, we report a systematic investigation of module-designed carbon-coated separators, where the carbon coating layer on the polypropylene membrane decreases the irreversible loss of dissolved polysulfides and increases the reaction kinetics of the high-loading sulfur cathode. Eight different conductive carbon coatings were considered to investigate how the materials’ characteristics contribute to the lithium–sulfur cell’s cathode performance. The cell with a nonporous-carbon-coated separator delivered an optimized peak capacity of 1112 mA∙h g⁻¹ at a cycling rate of C/10 and retained a high reversible capacity of 710 mA∙h g⁻¹ after 200 cycles under lean-electrolyte conditions. Moreover, we demonstrate the practical high specific capacity of the cathode and its commercial potential, achieving high sulfur loading and content of 4.0 mg cm⁻² and 70 wt%, respectively, and attaining high areal and gravimetric capacities of 4.45 mA∙h cm⁻² and 778 mA∙h g⁻¹, respectively.     

WC/纳米碳管复合材料制备及其电化学性能

碳化钨具有类铂催化性能和较强的抗中毒能力, 但其催化活性远低于铂等贵金属催化剂. 如何提高其催化活性是碳化钨应用研究所面临的主要难点与热点之一. 为寻找改善碳化钨催化性能的技术方法, 本文将表面修饰与原位还原碳化技术相结合, 成功制备了碳化钨/纳米碳管复合材料, 采用XRD, HRTEM等手段对其形貌和晶相组成进行了表征, 并应用粉末微电极对其电催化性能进行了评价. 实验结果表明, 样品由碳化钨颗粒和纳米碳管组成, 碳化钨为形态不规则纳米颗粒, 均匀地生长于纳米碳管的外表面; 在碱性溶液中, 复合材料对对硝基苯酚的电催化性能明显强于具有介孔结构的纯碳化钨样品. 这说明将碳化钨复合到纳米碳管的外表面是提高碳化钨电催化活性的有效技术方法之一.     

Molecular mobility in polymer thin films

Fluorescence recovery after photobleaching was used to measure in-plane dye-probe diffusion coefficients, D, in thin films of monodisperse polystyrene supported on fused quartz substrates. The substrates were prepared with a high density of surface hydroxyl groups which interact favorably with repeat units of the polymer. The effects of temperature and film thickness were investigated, at temperatures above the bulk glass transition of the polymer, T(g), and in the range of film thicknesses from 1-10(2) times the radius of gyration (R(g)) of individual polymer molecules. As the film thickness decreases towards R(g) the value of D increases above the bulk values, with significant effects first appearing in films approximately 20R(g). In the thinnest films studied, about 4R(g), the values of D lie as much as two orders over bulk values. At the same time, the temperature dependence of D becomes much weaker than in bulk. Analysis by free volume theory indicates that apparent values of both T(g) and the thermal expansion coefficient for liquid state, alpha(L), decrease as the film thickness decreases. The possible effects of surface segregation of the dye probe are discussed.     

Single-Shot Diffusion Measurement in Laser-Polarized Gas

A single-shot pulsed gradient stimulated echo sequence is introduced to address the challenges of diffusion measurements of laser polarized 3He and 129Xe gas. Laser polarization enhances the NMR sensitivity of these noble gases by >10(3), but creates an unstable, nonthermal polarization that is not readily renewable. A new method is presented which permits parallel acquisition of the several measurements required to determine a diffusive attenuation curve. The NMR characterization of a sample's diffusion behavior can be accomplished in a single measurement, using only a single polarization step. As a demonstration, the diffusion coefficient of a sample of laser-polarized 129Xe gas is measured via this method.     

A block coordinate gradient descent method for regularized convex separable optimization and covariance selection

We consider a class of unconstrained nonsmooth convex optimization problems, in which the objective function is the sum of a convex smooth function on an open subset of matrices and a separable convex function on a set of matrices. This problem includes the covariance selection problem that can be expressed as an ℓ ₁-penalized maximum likelihood estimation problem. In this paper, we propose a block coordinate gradient descent method (abbreviated as BCGD) for solving this class of nonsmooth separable problems with the coordinate block chosen by a Gauss-Seidel rule. The method is simple, highly parallelizable, and suited for large-scale problems. We establish global convergence and, under a local Lipschizian error bound assumption, linear rate of convergence for this method. For the covariance selection problem, the method can terminate in O(n³/e){O(n^3/\epsilon)} iterations with an e{\epsilon}-optimal solution. We compare the performance of the BCGD method with the first-order methods proposed by Lu (SIAM J Optim 19:1807–1827, 2009; SIAM J Matrix Anal Appl 31:2000–2016, 2010) for solving the covariance selection problem on randomly generated instances. Our numerical experience suggests that the BCGD method can be efficient for large-scale covariance selection problems with constraints.     

Combretastatin A-4 derivatives: synthesis and evaluation of 2,4,5-triaryl-1H-imidazoles as potential agents against H1299 (non-small cell lung cancer cell)

A number of 2,4,5-triaryl-1H-imidazole derivatives were synthesized and evaluated for their antiproliferative activities against the growth of five cell lines including three non-small cell lung cancers (H460, H1299, and A549), one breast cancer (MCF-7), and one normal diploid embryonic lung cell line (MRC-5). Preliminary results indicated that both 2-(5-bromofuran-2-yl)-4,5-bis{4-[3-(dimethylamino) propoxy] phenyl}-1H-imidazole (10f) and 4,5-bis{4-[3-(dimethylamino)propoxy]phenyl}-2-(5-nitrofuran-2-yl)-1H -imidazole (10g) were selectively active against the growth of H1229 with an IC₅₀ of less than 0.1???M, thus were more active than topotecan (IC₅₀ >?10.0??? M). However, both 10f and 10g exhibited only marginal cytotoxicity against H460, A549, MCF-7, and MRC-5 requiring an IC ₅₀ of at least 4.16???M. Our results also indicated that 10f induced H1299 cell cycle arrest at G0/G1 through the inactivation of p38 MAPK, JNK, ERK, as well as the expression of SIRT1 and survivin. These results suggested that 10f might have therapeutic potential against H1299 (non-small cell lung cancer cell).     

Multiphoton double ionization of Ar in intense extreme ultraviolet laser fields studied by shot-by-shot photoelectron spectroscopy

Photoelectron spectroscopy has been performed to study the multiphoton double ionization of Ar in an intense extreme ultraviolet laser field (hν ～ 21 eV, ～ 5 TW/cm2), by using a free electron laser (FEL). Three distinct peaks identified in the observed photoelectron spectra clearly show that the double ionization proceeds sequentially via the formation of Ar(+): Ar+hν→Ar (+) + e? and Ar2(+) + 2hν→Ar(+) + e?. Shot-by-shot recording of the photoelectron spectra allows simultaneous monitoring of FEL spectrum and the multiphoton process for each FEL pulse, revealing that the two-photon ionization from Ar(+) is significantly enhanced by intermediate resonances in Ar(+).     

Solving a multi-objective simulation model using a hybrid response surface method and lexicographical goal programming approach—a case study on integrated circuit ink-marking machines

In an integrated circuit (IC) packaging plant, the ink-marking machine has a significantly higher throughput than the other processing machines. When periodic demand surges result in backlog orders or in lost customers, there is a need to increase system throughput. To resolve this problem, the purchase of a new machine often results in excess capacity in addition to added operation and acquisition costs. Therefore, the productivity improvement effort has priority over the machine purchase decision. This paper seeks to optimize both throughput and cycle time performance for IC ink-marking machines. While throughput increase is the primary objective, there is an acceptable cycle time limit for a feasible solution. It is a multi-objective problem. The proposed solution methodology constructed a simulation metamodel for the ink-marking operation by using a fractional factorial experimental design and regression analysis. It is then solved by a hybrid response surface method and lexicographical goal programming approach. Solution results illustrated a successful application.