固相热分解反应最可几机制的判断

固相热分解反应最可几机制的判断高永煜，邹文樵，冯仰婕（华东理工大学化学系上海２００２３７）关键词热分解，动力学方程，反应机制固相热分解反应机制的判断，是热分析动力学中令人感兴趣的领域。常用的方法是从含机制函数的非等温积分动力学方程出发，分别用Ｓｅｓｔ...     

胺催化下的Baylis-Hillman反应

Baylis-Hillman (B-H)反应是在催化剂作用下由活泼烯烃和亲电试剂发生的偶合反应, 其产物是一个具有多官能团的化合物. 胺类催化剂是反应中应用最广泛的一类催化剂. 综述了各种胺催化下的Baylis-Hillman反应的研究进展.     

Voltammetric determination of 5-hydroxydole-3-acetic acid in human gastric juice

A method for the determination of the major serotonin metabolite — 5-hydroxyindole-3-acetic acid (5-HIAA) in human gastric juice by cyclic voltammetry was described. The measurement conditions were investigated. The potential window was chosen from +0.1 to +0.9 V, the supporting electrolyte was 0.025 M PBS solution (pH 2.0). The method allowed determination in the concentration range from 2.0 ×10⁻⁷ to 2.0 ×10 ⁻⁵ M and a detection limit of 80 nM. When samples of gastric juice were analyzed with the method, we obtained the mean content of 5-HIAA in the gastric juice. Meanwhile, interference from other ions and substances were examined. The experimental results indicate that the method for the determination of gastric juice samples is successful.     

LBL分子沉积法制备葡萄糖氧化酶电极

采用以静电力为主的逐层分子交替沉积技术制备葡萄糖氧化酶（GOD）电极.通过带有正电荷的聚二甲基二烯丙基铵盐酸盐（PDDA）和带有负电荷的GOD交替沉积在修饰有3-巯基-1-丙基磺酸钠（MPS）的金电极表面.以甲酸二茂铁为电子媒介体,用循环伏安法检测GOD电极对葡萄糖的响应.结果表明,当GOD电极组装层数小于4时,电流响应随着层数的增加而增大,超过4层时电流响应减小.其中4层GOD修饰电极的线性范围为0.55～6.63 mmol•L－1,当pH为7.0时,响应最大.同时电极的检测重现性能良好,相对标准偏差为2.4％.     

室温制备高合金化Pt-Ru/CMK-3催化剂及其对甲醇的电催化氧化

通过低温络合反应制备了高分散高合金化的Pt-Ru固溶体, 并将其均匀地担载在有序介孔碳CMK-3上, 以形成二元复合金属催化剂. XRD谱图表明,fcc结构的Pt原子部分被hcp结构的Ru原子取代形成置换固溶体， 而且几乎没有未形成合金的Ru存在. TEM和XRD研究结果表明， Pt-Ru/CMK-3催化剂中Pt-Ru合金粒子的平均粒径为27 nm, 且具有良好的均一度. 还研究了催化剂对甲醇的电催化氧化性能, 并与E-TEK公司同类催化剂进行了对比, 研究结果表明, Pt-Ru/CMK-3催化剂具有较大的电化学活性面积, 对甲醇的电催化氧化性能和抗CO中毒能力明显优于其它同类催化剂.     

Novel eclipsed 2D cadmium(II) coordination polymers with open-channel structure constructed from terephthalate and 3-(2-pyridyl)pyrazole: crystal structures, emission properties, and inclusion of guest molecules

Five new eclipsed two-dimensional (2D) coordination polymers, [[Cd(2)(TPT)(2)L(2)](GM(1))(3/2)(H(2)O)](infinity) (1) (TPT = terephthalate, L = 3-(2-pyridyl)pyrazole, GM(1) = terephthalic acid), [[Cd(TPT)L](GM(2))(H(2)O)(2)]( infinity) (2) (GM(2) = L = 3-(2-pyridyl)pyrazole), [[Cd(TPT)L](GM(3))(1/2)(H(2)O)](infinity) (3) (GM(3) = mesitylene), [[Cd(4)(TPT)(4)L(4)](GM(4))(7/2)](infinity) (4) (GM(4) = tetramethylbenzene), and [[Cd(TPT)L](GM(5))(1/2)](infinity) (5) (GM(5) = naphthalene), have been synthesized and characterized by X-ray diffraction. All the five complexes take the similar eclipsed 2D open-channel framework with different guest molecules included in the cavities of their channels. TGA analysis indicates that the eclipsed open-channel frameworks are thermally stable up to 300 degrees C. The porous property of the 2D framework of 5 was also investigated by the XRPD technique, which indicated that the guest molecules included in the open-channel frameworks are removable and the framework is maintained after the removal of the guest molecules. Moreover, complexes 1-5 also display strong blue emission in the solid state.     

Reduction and reconstruction of Co3O4 nanocubes upon carbon deposition

We describe a synthetic investigation on the formation of carbon nanofibers using a preshaped free-standing metal-oxide catalyst (single-crystal cobalt oxide (Co(3)O(4)) nanocubes). In reacting with acetylene (C(2)H(2)) vapor, Co(3)O(4) nanocubes are reduced and reconstructed into metallic cobalt. The resultant metal catalyst with a 2-fold symmetry leads to a bilateral base growth for carbon nanofibers. Our findings indicate that an understanding of catalyst-assisted chemical vapor deposition (CVD) mechanisms can be acquired, when the shape, size, and crystal orientation of pristine metal catalysts are made known to the CVD process. By tracing their evolutional changes in structure and composition, the shape-designed model catalysts may offer new opportunities for mechanistic investigations on the chemical reactivity of nanoparticles, general catalyst-assisted material synthesis, and metal intercalation chemistry.     

Capillary electrochromatographic separation of enantiomers under aqueous mobile phases on a covalently bonded cellulose derivative chiral stationary phase

A chemically bonded cellulose tris(3,5-dimethylphenylcarbamate) chiral stationary phase (CSP) was prepared by a radical polymerization reaction. The prepared CSP was packed into fused-silica capillaries with inner diameter of 75 microm to perform enantiomer separations in CEC. The electrochromatographic behavior of the CSP was investigated. On the prepared CSP, high EOF could be generated under acidic mobile phases, which represented an advantage for the separation of acidic enantiomers. Several neutral, acidic, and basic enantiomers were resolved on the prepared CSP under aqueous mobile phases. The column efficiencies were between 20,000 and 100,000 plates/m, which were much higher than those of HPLC. In addition, it was observed that the separation of some enantiomers benefited from the adoption of THF as mobile phase modifier.     

液晶聚酯与环氧嵌段共聚物的合成及表征

近年来 ,人们利用高分子液晶作为热固性环氧树脂的改性剂 ,不仅可以提高环氧树脂的韧性和强度 ,而且可以改善其热性能 ,为制备高性能的环氧树脂提供了一条新的途径[1,2 ] .目前报道所使用的液晶聚合物大多为液晶聚酯[3 ] 或液晶性聚氨酯[4] ,这些液晶聚合物与环氧树脂由于存在相容性不好的问题 ,给其实际应用带来了困难 .为了改善二者的相容性 ,本文采用溶液法合成了末端带有反应活性基团的聚酯型液晶聚合物 ,将它再与双酚Ａ环氧预聚物反应 ,制得了高分子液晶环氧嵌段共聚物 ,其合成路线如下 :2ＨＯＣＯＯＣＨ3+ ＨＯ(ＣＨ2 ) 6 ＯＨ　　Ｈ…     

Dienone—phenol Rearrangement of C—9 Oxygenated Decalinic Dienone and Analogs through B—Ring Cleavage

Dehydrogenation of 9-hydroxy decalinic enones and analogs with DDQ resulted in a formal dienone-phenol type rearrangement via B-ring cleavage, while the corresponding dienone acetates underwent base-catalyzed formal dienone-phenol type rearrangement analogously.