193 nm氟化物增透膜的特性

 为了研制低损耗、高性能的193 nm氟化物增透膜,研究了基底和不同氟化物材料组合对氟化物增透膜的影响。在熔石英基底上,将挡板法和预镀层技术相结合,采用热舟蒸发方式制备了不同氟化物材料组合增透膜,对增透膜的剩余反射率和光学损耗等光学特性,以及表面粗糙度和应力等特性进行了测量和比较。在分析比较和优化的基础上,设计制备的3层1/4波长规整膜系AlF3/LaF3增透膜在193 nm的剩余反射率低于0.14%,单面镀膜增透膜的透射率为93.85%,增透膜表面均方根粗糙度为0.979 nm,总的损耗约为6％。要得到高性能的193 nm增透膜,应选用超级抛光基底。     

Synthesis of laterally substituted bistolane liquid crystals

Methods for synthesizing bistolane liquid crystal materials with lateral methyl and ethyl substituents are presented. Some of the bistolanes are nematic at room temperature. These highly conjugated mesogens exhibit wide nematic ranges, small enthalpies of fusion, high birefringence and modest viscosity. Their potential applications for flat panel displays employing light scattering or Bragg reflection and for infrared optically phased arrays are foreseeable.     

Anionic surfactant selective electrode for the titrimetric determination of anionic surfactant

The construction and characteristic performance of a PVC membrane electrode responsive for sodium dodecylsulfate (SDS) are described in this paper. The electrode based on CTA⁺DS^? ion pair as ionophore in PVC membrane displays a Nernstian slope of ?58.8 ± 0.7 mV/decade in a 1.32 × 10^?6 to 3.75 × 10^?3 mol L^?1 concentration range and a limit of detection of 1.13 × 10^?6 mol L^?1. The electrode can be used for 3 months without showing significant changes in the value of slope or working range. The electrode has been utilized as an end point indicator electrode for potentiometric titration involving Hyamine as titrant. More than 100 titrations were carried out for the evaluation of the electrode parameters: the standard deviations of the equivalent volume and the equivalent potential, the height of the potential jump and the number of faulty titrations. The behavior of the electrode was assessed with regard to their usefulness in routine analysis.     

Fabrication of rhenium Josephson junctions

Rhenium is a superconductor with a relatively weak tendency to oxidize, which is advantageous in superconducting quantum circuit and qubit applications. In this work, Re/A1-A1Ox/Re Josephson tunnel junctions were fabricated using a selective film-etching process similar to that developed in Nb trilayer technology. The Re films had a superconducting transition temperature of 4.8 K and a transition width of 0.2 K. The junctions were found to be highly reproducible using the fabrication process and their characteristics had good quality with a low leakage current and showed a superconducting gap of 0.55 meV.     

一类分数阶混沌系统的自适应同步

针对一类分数阶混沌系统的同步问题,基于分数阶系统的类Lyapunov稳定性理论,设计了一种新的自适应同步控制器以及控制增益系数自适应律.与现有结果相比,该方法具有控制器结构简单、控制代价小以及通用性强等特点,可适用于大部分典型的分数阶混沌系统.最后,数值仿真结果验证了所提方法运用于分数阶混沌系统同步研究的有效性.     

LD泵浦Nd:YVO4/LBO临界相位匹配腔内倍频瓦级绿光激光器

报道了一种光纤耦合LD泵浦Nd:YVO₄晶体、腔内Ⅰ类临界相位匹配(角度匹配)LBO倍频、瓦级输出的全固态绿光激光器的设计方法和实验结果.采用短三镜折叠腔结构,通过对热透镜焦距的估算及计算机优化设计选取合适的谐振腔参量,在8 W的泵浦功率下,获得了1.6 W绿光基模输出,光-光转换效率达20%.经测量,绿光的偏振比超过400:1,4 h功率稳定度为±1.6%.     

锆氢化反应热力学函数的计算

用B3LYP/SDD密度泛函方法计算了ZrH的微观性质,气态ZrH(D,T)的能量(E),熵(S)以及 Zr与氢同位素气体反应的热力学函数.在ZrH(s)、ZrD(s)和ZrT(s)的E和S的计算中,近似以分 子总能量中的振动能Ev代替固态能量,以电子和振动熵SEv代替固态熵.在这种近似下,计算了 不同温度下Zr与H2、D2、T2反应的ΔH、ΔG、ΔS及氢化反应平衡压力,导出了与温度 的依赖关系.计算结果表明,ZrH(s)的生成热为161.34 kJ穖ol-1,与实验值(173.5 kJ穖ol -1)接近,表明这种近似处理方法是合理的,可以用于研究贮氢材料氢化反应的热力学.     

低频标准真空涨落的测量

采用自平衡零拍方案, 对低频段的标准量子真空涨落进行了测量. 实验确定了该系统的饱和光功率约为3.2 mW. 在10 Hz–400 kHz的频率范围内, 系统的共模抑制比平均为55 dB, 在100 Hz处高达63 dB, 对激光经典技术噪声具有很强的抑制作用. 当入射光功率为400 μ W 时, 真空涨落噪声达到11 dB. 此低频量子真空噪声探测系统可广泛应用于量子计量和量子光学等研究领域.     

WS2纳米微粒LB膜的摩擦学性能研究

研究了铝基体上沉积的二十酸、二烷基二硫代磷酸及由其修饰的ＷＳ２纳米微粒ＬＢ膜的摩擦学性能，并且利用红外显微镜分析了ＬＢ膜在摩擦过程中的结构变化．结果表明：在给定的试验条件下，几种ＬＢ膜的摩擦系数都远比铝的０．７０～０．７６低，耐磨性能以二烷基二硫代磷酸修饰的ＷＳ２纳米微粒ＬＢ膜的最好，几乎比二十酸ＬＢ膜的高２０倍，这是由于ＷＳ２纳米微粒起着支承负荷作用的缘故；二烷基二硫代磷酸锌及由其修饰的ＷＳ２纳米微粒ＬＢ膜在摩擦过程中发生了向偶件表面的材料转移，同时在摩擦力的作用下膜发生了摩擦化学反应或变化     

水筒中涂层模型降低噪声总声级的研究

我们根据回转体模型的水筒噪声试验，分析了不同低表面能涂层模型在高，低频段代噪声总声级的效果，一些涂层模在高频噪声级降低很多时引起了噪声总声级的降低。