Polymer Optical Fiber Photosensitivities and Highly Tunable Fiber Gratings

In this paper, recent progress in the investigation of photosensitivities of polymer optical fibers and the development of polymer optical fiber grating is reported. Photosensitivities in various polymer fibers, including doped and undoped, multimode and single-mode polymer fibers, have been experimentally characterized and evaluated for fiber grating application. In particular, the wavelength dependence of material absorption and photosensitivity has been found essential to the fabrication of polymer optical fiber grating. Based on the results of photosensitivity research, polymer optical fiber gratings have been successfully fabricated. More importantly, polymer optical fiber grating has been demonstrated highly tunable, with a tuning range more than 70 nm. The unique feature of high tunability in polymer optical fiber grating has great potential in various applications including optical fiber WDM systems and fiber sensor systems. Several important issues that remain to be investigated will also be discussed.     

碳纳米管的稳定性研究

石墨晶体结构遭到破坏时,总是碎化为微小尺寸的片状粉末.孤立的石墨烯片在其边缘存在大量的悬挂键,使得石墨烯片的能量较高,状态也不稳定.石墨烯片卷曲形成碳纳米管后,悬挂键减少,系统能量相应降低.另一方面,石墨烯片卷曲形成碳纳米管将产生相应的形变势能,形变势能的产生将抵消由于减少石墨烯片边缘上的悬挂键所带来的能量降低,使碳纳米管的能量可能高于石墨烯片的能量,导致碳纳米管结构的不稳定.在建立碳纳米管生成的力学模型并进行深入理论分析的基础上得出了碳纳米管可以稳定存在的最小直径约为0.32nm的结论. 关键词： 碳纳米管 稳定性 形变势能 键能     

添加有TiO2纳米颗粒的R11池沸腾换热研究

对添加有TiO2纳米颗粒的制冷剂R11在外径为22.4mm紫铜管外的池沸腾换热特性进行了实验研究.池沸腾饱和温度为35℃和40℃,纳米颗粒悬浮液的浓度为0.01g/l和0.05g/l.对铜管圆周上、下、前、后四个部位的局部换热情况进行了测量和可视化观察以及相应的粗糙度检测分析.结果发现,纳米颗粒的添加基本使管上部粗糙度降低,传热弱化,而使下部粗糙度增加,传热强化.就整体换热而言,40℃的强化换热效果好于30℃,0.01g/l的强化换热效果好于0.05g/l.     

A biosensor based on graphene nanoribbon with nanopores: a first-principles devices-design

A biosensor device,built from graphene nanoribbons(GNRs) with nanopores,was designed and studied by firstprinciples quantum transport simulation.We have demonstrated the intrinsic transport properties of the device and the effect of different nucleobases on device properties when they are located in the nanopores of GNRs.It was found that the device’s current changes remarkably with the species of nucleobases,which originates from their different chemical compositions and coupling strengths with GNRs.In addition,our first-principles results clearly reveal that the distinguished ability of a device’s current depends on the position of the pore to some extent.These results may present a new way to read off the nucleobases sequence of a single-stranded DNA(ssDNA) molecule by such GNRs-based device with designed nanopores     

基于新型MRTD模型研究扫描型红外热像仪的视距

 基于人眼视觉系统可感知的阈值信噪比,提出预测红外热像仪最小可分辨温差（MRTD）方法。该方法根据频谱理论和红外热成像系统的二维调制传递函数,并结合匹配滤波器的概念,描述4条带标准靶的空间频谱函数。利用此空间频谱函数研究了4条带标准靶经过红外热成像系统的调制传递之后人眼视觉系统的感知信噪比。基于人眼视觉系统可感知的阈值信噪比,建立一个新的MRTD模型。依据此MRTD模型和视距模型,实现红外热像仪视距的预测。仿真结果表明,该方法预测的视距与实验数据有很好的一致性。     

Crystal structure and magnetic properties of SmCo-based films deposited on hot Si (1 0 0) substrates

SmCo-based films were deposited on Si (1 0 0) substrates by the rf magnetron sputtering process. The growth conditions are improved for the films deposited on hot Si substrates without the annealing process. The dependence of crystal structure and intrinsic coercivity on substrate temperature is chiefly investigated. It is suggested that TbCu₇ type structural films can be obtained with enhanced in-plane magnetic properties with proper substrate temperature.     

曲率半径误差对平场全息凹面光栅分辨率的影响及其补偿方法

在平场凹面全息光栅的没计制作中,不可避免的存在曲率半径误差,严重影响光栅光谱仪的分辨率.为了从理论上分析并指导光谱仪器的设计和装调,运用几何光线追迹方法计算并分析了不同曲率半径误差下光谱像宽度的变化规律,发现在一个较大的误差范围内子午焦线的位置随着曲率半径的变化前后平移,同时其弯曲程度几乎没有改变.数值计算发现通过调整像面位置或人臂长度均能够补偿曲率半径的误差.数值模拟结果显示,修正使用结构后的光栅能够达到与设计结果相近的成像质量.     

太阳光泵浦激光器侧面泵浦效率的提高

太阳光泵浦激光器直接利用太阳光作为泵浦源,实现了太阳光能量到激光能量的直接转化。设计了分腔水冷型金属锥形泵浦腔,以直径8 mm,长115 mm的Nd:YAG晶体棒作为激光工作物质,用有效面积1.03 m2菲涅尔透镜会聚太阳光,实验获得了23.7 W的稳定激光输出,斜效率为7.87%。通过对比实验,改进后的分腔水冷型太阳光泵浦激光器较原有锥形腔激光器有55.92%的激光输出功率提升。分别从侧面泵浦光在冷却水中的吸收损耗以及其耦合效率等方面对新型腔体结构进行了分析,证实了分腔水冷型腔体结构对侧面泵浦效率的提高,并提出了陶瓷漫反射材质的分腔水冷型激光腔的设计。     

Trap States in Al2O3 InAlN/GaN Metal-Oxide-Semiconductor Structures by Frequency-Dependent Conductance Analysis

We present a detailed analysis of the trap states in atomic layer deposition Al2O3/InAlN/GaN high electron mobility transistors grown by pulsed metal organic chemical vapor deposition. Trap densities, trap energies and time constants are determined by frequency-dependent conductance measurements. A high trap density of up to 1.6×1014 cm？2eV？1 is observed, which may be due to the lack of the cap layer causing the vulnerability to the subsequent high temperature annealing process.     

基于CCD技术测量单缝衍射中中央明纹的相对光强

针对单峰衍射的特点,提出了一种基于CCD技术测量单缝衍射中,中央明纹的相对光强的方法,该方法利用CCD及相应软件的支持,拍摄出单缝衍射的明暗纹图谱,再利用origin pro.v7.5绘图软件经转置、数据统计分析,显示光强分布曲线和相对应的数据等,完成对中央明纹的相对光强计算。