High-performance liquid chromatographic method for routine determination of vitamins A and E and beta-carotene in plasma.

A simple and reliable reversed-phase high-performance liquid chromatographic (HPLC) method for the routine determination of vitamins A and E and beta-carotene in plasma (or serum) with wavelength-programmed ultraviolet-visible absorbance detection is described. A 200-microliters aliquot of serum or plasma sample, after deproteinization with ethanol, and containing tocopherol acetate as internal standard, was extracted with butanol-ethyl acetate. Sodium sulphate was added for dehydration. Analytes of extracted samples were found to be stable for at least four days. A 10-microliters aliquot of this organic extract was used for HPLC analysis. The mobile phase was methanol-butanol-water (89.5:5:5.5, v/v) and the flow-rate was set at 1.5 ml/min. The analytes of interest were well separated from other plasma constituents within 22 min at 45 degrees C. The lowest detection limits of vitamins A and E and beta-carotene were 0.02, 0.5 and 0.1 microgram/ml, respectively. The recovery and reproducibility of the present method were around 90%. The method is sensitive, specific and can be used for epidemiological studies and for routine determination of vitamin deficiency. Several important factors that may affect the analysis are also discussed in this paper.     

Automatic mass spectrometry method development for drug discovery: application in metabolic stability assays

High-throughput metabolic screening has been requested routinely to keep pace with high-throughput organic synthesis. Liquid chromatography/tandem mass spectrometry (LC/MS/MS) with a fast gradient has become the method of choice for the task due to its sensitivity and selectivity. We have developed an automated system that consists of a robotic system for in vitro incubation and a commercially available software package for automatic MS/MS method development. A short, generic LC gradient and MS conditions that are applicable to most compounds have been developed to minimize the method development time and data analysis. This system has been used to support a number of in vitro screening assays in early drug discovery phase including microsomal stability and protein binding.     

A thermogravimetric analyzer for condensable gas adsorption under subatmospheric conditions

Potential alternative to petrochemical polymers, soy protein isolate (SPI), a plentily available, natural biopolymer is chemically modified with thiourea at 2.5, 5, 7.5, 10, 15 and 20 mass/mass% for better processing of plastic as a raw material. From the FTIR studies, it has been ascertained that there is no bonding reaction between SPI and thiourea and it acts as a modifier only. Thermogravimetric analysis of the modified material has been followed using a computer analysis method, LOTUS package, developed by us for assigning the degradation mechanism. A number of equations have been used to evaluate the kinetic parameters. The mechanism of degradation of the biopolymer is explained on the basis of the kinetic analysis.     

Liquid-liquid extraction of cadmium(II) from aqueous thiocyanate solutions with liquid anion-exchangers

An investigation has been made on the system liquid anion-exchanger-Cd(II)-NCS⁻. The influence of the acidity and thiocyanate concentration of the aqueous phase on the extraction has been studied. Using various methods of analysis, it has been shown that the complex anion present in the organic extracts is Cd(NCS) ₄ ²⁻ . Details are given concerning the removal of traces of Zn(II) from Cd(II)-containing solutions, and the quantitative separation of Cd(II) from Cr(III).     

Amperometric detection of amino acids with a passivated copper electrode

The amperometric behaviour of a copper electrode towards amino acids is studied by means of a rotating disc electrode. A theoretical model describing the anodic background current in a buffer solution and the increase of the current caused by amino acids is checked experimentally. The influences of the amino acid concentration, the rotation speed of the electrode and the composition of the buffer solution are studied. It is proved that chemical dissolution of a passivating film on the electrode surface, which is enhanced by the complexation reaction between the amino acid and copper(II) ions, is the principle of the phenomena observed. The applicability to flow systems is demonstrated.     

Contactless conductivity detection of synthetic polymers in non-aqueous size-exclusion electrokinetic chromatography

A capacitively coupled contactless conductivity detection (CCD) system has been applied for the detection of neutral synthetic polymers in capillary size-exclusion electrokinetic chromatography (SEEC). Polystyrene standards, that were used as a model compounds, were separated on a capillary column packed with porous 10 microm silica particles with an electrokinetically driven mobile phase, and detected by CCD and UV detection simultaneously. Mass-calibration curves for polystyrene were constructed. Satisfactory results were obtained for the linearity, the run-to-run repeatability (<0.2% for the relative retention and <4% for the peak area) and the robustness of the detector. One of the major issues in this preliminary study was to investigate the origin of the peaks observed for the polystyrene standards. The effect of the molar mass of the polystyrenes on the sensitivity was small. Therefore, the signals obtained could not be explained as the result of an increased viscosity and a decreased solution conductivity of the solute zone. An alternative hypothesis is suggested, and recommendations for further research are given.     

Improved computer algorithm for characterizing skewed chromatographic band broadening : II. Results and comparisons

A newly developed method using an exponentially modified Gaussian peak shape model produces results that are more precise and less subject to baseline noise than previous methods for characterizing chromatographic band broadening. The method requires only precisely measurable experimental peak parameters: peak retention time, peak height, peak area, and peak centroid (first moment). Accuracy and precision of the new method were compared with other digital approaches by using computer-synthesized peaks and experimental chromatographic data from many HPLC columns. The proposed method offers a reasonable compromise between accuracy, precision, and convenience. A rapid visual estimate of peak skew can be made by inspecting peak shape and referring to a calibration plot involving peak parameters. Peak variance and skew data from this method are also useful for finding column dispersion corrections in size-exclusion chromatography calibrations.     

Retroaldol-aldol isomerization of perhydroazulenic hydroxyketones

The retroaldol-aldol isomerization of the epimeric hydroxyketones $\text{3}$ and $\text{5}$ was found to yield predominantly $\text{4}$ and $\text{6}$, respectively, under kinetic conditions in the presence of chelating lithium cations. In hydroxylic medium $\text{4}$ is the preferred kinetic product. Under equilibration conditions $\text{4}$ and $\text{5}$ predominate.     

Adsorptive stripping voltammetric determination of traces of molybdenum in natural water in the presence ofα-benzoinoxime

The electrochemical behavior of the molybdenum complex of -benzoinoxime was investigated using cyclic voltammetry and linear scan voltammetry, after adsorptive accumulation of the complex onto a hanging mercury drop electrode (HMDE). The signal corresponds to the reduction of molybdenum in the complex adsorbed at the HMDE surface. Under optimal conditions, the adsorptive stripping voltammetric procedure gave an extremely low detection limit of 0.1 nM (9.6ng/l) Mo(VI) following stirred accumulation for 5 min at 0.0 V (vs. Ag/AgCl). The reduction cur rent-[Mo(VI)] relationships were linear up to 25 and 100 nM. Repetitive determinations of 10 nM solutions gave relative standard deviations of 2.2 and 3.5%, for 1 and 5-min accumulation periods, respectively. Most of the ions investigated did not interfere with the determination of molybdenum, except for tungsten. Excellent selectivity against copper was observed. The proposed procedure was applied to the direct determination of molybdenum in natural water.