Organic Reactions in Ionic Liquids： An Efficient Method for the Synthesis of Phenacyl Esters by Reaction of Carboxylic Acids with α-Bromoacetophenone Promoted by Potassium Fluoride

An efficient method is reported for the synthesis of phenacyl esters by reaction of carboxylic acids with a-bromoacetophenone promoted by potassium fluoride in ionic liquid [Bmim]PF6, the yield of the reaction is almost quantitative and the products are essentially pure.     

对甲烷氧化偶联W－Mn／SiO＿2催化剂Na＿2WO＿4的流失及其影响的考察

用ＸＲＤ、ＦＴ－ＩＲ、ＥＳＲ、Ｈ２－ＴＰＲ和ＴＰＯ等方法，对Ｎａ２ＷＯ４－Ｍｎ２Ｏ３／ＳｉＯ２催化剂和其经水煮处理的一系列样品进行了表征．实验发现该催化剂中的结晶态Ｎａ２ＷＯ４易于流失，单层分布的Ｎａ２ＷＯ４在苛刻的处理条件下也有可能流失．依此，探讨了上述流失现象与Ｎａ２ＷＯ４－Ｍｎ２Ｏ３／ＳｉＯ２催化剂的催化活性及该催化剂在长时间反应中发生的ＳｉＯ２相变之间的关系，证明了结晶态Ｎａ２ＷＯ４的流失对该催化剂甲烷氧化偶联反应的催化活性只有轻微的影响，单层分布Ｎａ２ＷＯ４的流失可造成催化剂中Ｍｎ从Ｍｎ３＋转变为Ｍｎ２＋，并使催化剂的催化活性明显降低．但在水煮条件下，无论是结晶态的还是单层分布，Ｎａ２ＷＯ４的流失都没有对ＳｉＯ２的α－方石英结构产生影响     

Synthesis of anticonvulsant activity of some 2-phenylcarbamoyl-1,2-diazabicyclo[2.2.2]octanes

A number of aryl isocyanates were adducted to 1,2-diazabicyclo[2.2.2]octane and afforded 2-phenyl-carbamoyl-1,2-diazabicyclo[2.2.2]octanes. Some of the products displayed anticonvulsant activity.     

等离子体聚合及其聚合物的应用

本文着重综述了烃,含氮、氧的有机化合物,碳氟化合物以及有机硅化合物的等离子体聚合。同时还系统地介绍了等离子体聚合物在制备反渗透膜、分离膜、材料表面的涂层等方面的国内外的最新研究成果。     

A density functional study on the formation of charge transfer complexes between alkaloids and iodine monochloride

The formation of charge-transfer (CT) complexes between N-methyl-6,7-methylenedioxy-tetrahydro-4-isoquinolone (MMDTIQ, the model molecule of alkaloids) and iodine monochloride has been studied with the density functional B3LYP method. The competition for ICl between n-donor(s) and π-donor in the same molecule has been compared for the first time. The results indicate that the electron-donating ability of various donor sites decreases in the following order: amino nitrogen>carbonyl oxygen>etheric oxygen≈aromatic ring. Complexes with a stoichiometry of 1:1 to 1:5 (MMDTIQ–ICl) might form. Among complexes with a given stoichiometry, the one in which the phenyl ring is involved in the binding is always the least stable. According to these results, in order to ensure an alkaloid iodinated, the amount of ICl should be far beyond that of alkaloids and a low polar solvent should be used, which is quite in agreement with our recent experimental results.     

A regiospecific synthesis of 1-methylamino-6-fluoro-7-(4-methylpiperazin-1-yl)-1,4-dihydro-4-oxoquinoline-3-carboxylic acid

An efficient and regiospecific synthesis of 1-methylamino-6-fluoro-7-(4-methylpiperizin-1-yl)-1,4-dihydro-4-oxoquinoline-3-carboxylic acid ( 3 ) via an intramolecular nucleophilic displacement cyclization reaction is reported.     

The chemistry of thujone. IX. Thujone as a chiral synthon for the synthesis of optically active steroid analogues. The vinylpicoline route

The thujone-derived enone 1 , upon base-catalyzed reaction with 2-methyl-6-vinylpyridine is converted to the pyridine analogue 5 (Scheme 1). Catalytic reduction of the latter to 6 generates two new centers of chirality which eventually become C(8) and C(14) in the ultimate synthetic steroid analogue 12 . An X-ray analysis of 6 establishes the structure and absolute configuration so as to determine its suitability in subsequent synthetic studies. The acetal derivative 7 , via Birch reduction, hydrolysis, and internal aldol cyclization, is converted into the cyclohexenone analogue 10 (Scheme 2). This ‘one-pot’ process affords an efficient conversion of the pyridine ring into a cyclohexenone system required for A-ring construction of the steroid skeleton. Finally, conversion of 10 , via the unsaturated diketone 11 , provides the chiral steroid analogue 12 .     

Synthesis of racemic and enantiomerically pure 2′-thia-2′,3′-dideoxycytidine as potential anti-hepatitis B virus agents

A novel class of nucleosides with the C₁, atom bonded to three hetero atoms was synthesized. 2′-Thia-2′,3′-dideoxycytidine was the pilot compound of this series. (±)-β-2′-Thia-1′,3′-dideoxycytidine ( 6 ) and (±)-α-2′-thia-2′,3′-dideoxycytidine ( 7 ) were synthesized from (±)-3-mercapto-1,2-propanediol. The synthesis of the enantiomerically pure 2′-thia-2′,3′-dideoxycytidines (α-D-form, β-D-form, α-1-form and β-L-form) from optically pure (S)-(2,2-dimethyl-1,3-dioxalan-yl)methyl p-toluenesulfonate ( 8 ) and its (R)-isomer 18 was also described. The preliminary biological results showed that (+)-β-D-2′-thia-2′,3′-dideoxycytidine ( 26 ) was the most active against human hepatitis B virus with an ED₅₀ of 3 μM.     

The 1,3-Dipolar Cycloadditions of 3-Arylsydnone-4-Carbonitrile Oxides with Alkenes

3-Arylsydnone-4-carbonitrile oxides may undergo 1,3-dipolar cycloadditions with alkenes to produce the corresponding 3-aryl-4-(5-substituted-isoxazolin-3-yl)sydnones. The direct reaction of 3-arylsydone-4-carbohydroximic acid chlorides with alkenes may also give the same products, and with higher yield.     

Studies on Liquid/liquid Extraction of Copper Ion with Room Temperature Ionic Liquid

Room temperature ionic liquids are regarded as “Green solvents” for their nonvolatile and thermally stable properties. They are employed to replace traditional volatile organic solvents in organic synthesis, solvent extraction, and electrochemistry. In this work, a water immiscible room temperature ionic liquid, 1‐butyl‐3‐methylimidazolium hexafluorophosphate [C₄mim][PF₆], was used as an alternative solvent for liquid/liquid extraction of copper ions. Metal chelators, including dithizone, 8‐hydroxyquinoline, and 1‐(2‐pyridylazo)‐2‐naphthol, were employed to form neutral metal‐chelate complexes with copper ions so that copper ions were extracted from aqueous solution into [C₄mim][PF₆]. The parameters that affect the extraction of copper ions with this biphasic system were investigated. The extraction behavior in this novel biphasic system is shown to be consistent with that of traditional solvents. For example, the extraction with this biphasic system is strongly pH dependent. So, the extraction efficiency of coppers ion from an aqueous phase can be manipulated by tailoring the pH value of the extraction system. Hence, the extraction, separation and preconcentraction of copper ions can be accomplished by controlling the pH value of the extraction system. It appears that the use of ionic liquid as an alternate solvent system in liquid/liquid extraction of copper ions is very promising.