Fiber optical parametric amplifiers in optical communication systems

The prospects for using fiber optical parametric amplifiers (OPAs) in optical communication systems are reviewed. Phase‐insensitive amplifiers (PIAs) and phase‐sensitive amplifiers (PSAs) are considered. Low‐penalty amplification at/or near 1 Tb/s has been achieved, for both wavelength‐ and time‐division multiplexed formats. High‐quality mid‐span spectral inversion has been demonstrated at 0.64 Tb/s, avoiding electronic dispersion compensation. All‐optical amplitude regeneration of amplitude‐modulated signals has been performed, while PSAs have been used to demonstrate phase regeneration of phase‐modulated signals. A PSA with 1.1‐dB noise figure has been demonstrated, and preliminary wavelength‐division multiplexing experiments have been performed with PSAs. 512 Gb/s have been transmitted over 6,000 km by periodic phase conjugation. Simulations indicate that PIAs could reach data rate x reach products in excess of 14,000 Tb/s × km in realistic wavelength‐division multiplexed long‐haul networks. Technical challenges remaining to be addressed in order for fiber OPAs to become useful for long‐haul communication networks are discussed.

     

A Rapid,Highly Sensitive and Selective Phosgene Sensor Based on 5,6-Pinenepyridine

The toxicity of phosgene (COCl₂) combined with its extensive use as a reactant and building block in the chemical industry make its fast and accurate detection a prerequisite. We have developed a carboxylic derivative of 5,6-pinenepyridine which is able to act as colorimetric and fluorimetric sensor for phosgene in air and solution. For the first time, the formation of a pyrido-[2,1-a]isoindolone was used for this purpose. In solution, the sensing reaction is extremely fast (under 5 s), selective and highly sensitive, with a limit of detection (LOD) of 9.7 nM/0.8 ppb. When fixed on a solid support, the sensor is able to detect the presence of gaseous phosgene down to concentrations of 0.1 ppm, one of the lowest values reported to date.     

New Bioactive Peptides Identified from a Tilapia Byproduct Hydrolysate Exerting Effects on DPP-IV Activity and Intestinal Hormones Regulation after Canine Gastrointestinal Simulated Digestion

Like their owners, dogs and cats are more and more affected by overweight and obesity-related problems and interest in functional pet foods is growing sharply. Through numerous studies, fish protein hydrolysates have proved their worth to prevent and manage obesity-related comorbidities like diabetes. In this work, a human in vitro static simulated gastrointestinal digestion model was adapted to the dog which allowed us to demonstrate the promising effects of a tilapia byproduct hydrolysate on the regulation of food intake and glucose metabolism. Promising effects on intestinal hormones secretion and dipeptidyl peptidase IV (DPP-IV) inhibitory activity were evidenced. We identify new bioactive peptides able to stimulate cholecystokinin (CCK) and glucagon-like peptide 1 (GLP-1) secretions, and to inhibit the DPP-IV activity after a transport study through a Caco-2 cell monolayer.     

Plastic folding of buckling structures

Atomic force microscopy observations of the free surface of gold thin films deposited on silicon substrates have evidenced the buckling of the films and the formation of blister patterns undergoing plastic folding. The classical elastic buckling and plastic deformation of the films are analyzed in the framework of the F?ppl-Von Kármán theory of thin plates introducing the notion of low-angle tilt boundaries and dislocation distributions to describe this folding effect. It is demonstrated that, in agreement with elementary plasticity of bent crystals, the presence of such tilt-boundaries results in the formation of buckling patterns of lower energy than "classical" elastic blisters.     

A Molecular Analogue of the C−H Activation Intermediate of the Silica-Supported Ga(III) Single-Site Propane Dehydrogenation Catalyst: Structure and XANES Signature

Propane dehydrogenation is an important field of research due to an increasing world-wide demand of propene while classical production routes through naphtha cracking are in decline. In that context, silica-supported Ga(III) sites, synthesized from surface organometallic chemistry principles, show high selectivity and stability in the propane dehydrogenation reaction. This performance is in significant contrast to the reported fast deactivation and lower selectivity of most Ga₂O₃ and CrO₃ based materials. The Ga-catalyzed propane dehydrogenation reaction is proposed to proceed through the formation of Ga alkyl intermediates for which it would be desirable to have detailed structural and spectroscopic information. Here, we prepare a consistent series of Ga(III) molecular complexes with varying numbers of alkyl and siloxide ligands; they are characterized by single crystal X-Ray diffraction and X-Ray Absorption Near Edge Structure analysis, which is known to be highly sensitive to the Ga coordination environment. We report in particular the structure and the spectroscopic signatures of [Ga(ⁱPr)(OSi(O^tBu)₃)₂(HOSi(O^tBu)₃)], a molecular mimic of the key proposed reaction intermediates in the Ga-catalyzed PDH reaction.     

Development and Molecular Understanding of a Pd-Catalyzed Cyanation of Aryl Boronic Acids Enabled by High-Throughput Experimentation and Data Analysis

A synthetic method for the palladium-catalyzed cyanation of aryl boronic acids using bench stable and non-toxic N-cyanosuccinimide has been developed. High-throughput experimentation facilitated the screen of 90 different ligands and the resultant statistical data analysis identified that ligand σ-donation, π-acidity and sterics are key drivers that govern yield. Categorization into three ligand groups – monophosphines, bisphosphines and miscellaneous – was performed before the analysis. For the monophosphines, the yield of the reaction increases for strong σ-donating, weak π-accepting ligands, with flexible pendant substituents. For the bisphosphines, the yield predominantly correlates with ligand lability. The applicability of the designed reaction to a wider substrate scope was investigated, showing good functional group tolerance in particular with boronic acids bearing electron-withdrawing substituents. This work outlines the development of a novel reaction, coupled with a fast and efficient workflow to gain understanding of the optimal ligand properties for the design of improved palladium cross-coupling catalysts.     

Photocatalytic Water Oxidation by a Pyrochlore Oxide upon Irradiation with Visible Light: Rhodium Substitution Into Yttrium Titanate

A stable visible‐light‐driven photocatalyst (λ≥450 nm) for water oxidation is reported. Rhodium substitution into the pyrochlore Y₂Ti₂O₇ is demonstrated by monitoring Vegard′s law evolution of the unit‐cell parameters with changing rhodium content, to a maximum content of 3 % dopant. Substitution renders the solid solutions visible‐light active. The overall rate of oxygen evolution is comparable to WO₃ but with superior light‐harvesting and surface‐area‐normalized turnover rates, making Y₂Ti_1.94Rh_0.06O₇ an excellent candidate for use in a Z‐scheme water‐splitting system.     

Transition‐Metal‐Functionalized DNA Double‐Crossover Tiles: Enhanced Stability and Chirality Transfer to Metal Centers

The double crossover junction (DX) is a fundamental building block for generating complex and varied structures from DNA. However, its implementation in functional devices is limited to the inherent properties of DNA itself. Here, we developed design strategies to generate the first metal–DX DNA tiles (DX_M) by site‐specifically functionalizing the tile crossovers with tetrahedral binding pockets that coordinate Cu^I. These DX junctions bind two Cu^I ions independently at distinct sites, display greater thermal stability than native DX tiles upon metalation, and melt in a cooperative fashion. In addition, the right‐handed helical chirality of DNA is transferred to the metal centers. Our tiles display high metal ion selectivity, such that Cu^II is spontaneously reduced to Cu^I in situ. By modifying our design over three generations of tiles, we elucidated the thermodynamic and geometric requirements for the successful assembly of DX_M tiles, which have direct applicability in developing robust, stable DNA‐based materials with electroactive, photoactive, and catalytic properties.