Collision cell pressure effect on CID spectra pattern using triple quadrupole instruments: a RRKM modeling

Control of the ion internal energy in mass spectrometry is needed to establish a workable mass spectral library. The purpose of this study is to understand and to compare the pressure effects on the collision‐induced dissociation (CID) spectrum pattern recorded using triple quadrupole instruments. The monoprotonated Leucine enkephalin [YGGFL, H⁺] was used as a thermometer molecule to calibrate the electrospray ionization (ESI) and the CID internal energies deposited on the molecular species and the time scale of ion decompositions. The survival yield and the ratio of a₄/b₄ fragment ions were mainly monitored. The energy uptake for the ESI source geometry used in our study has no impact on the CID spectrum fingerprint. The collision cell pressure for the [YGGFL, H⁺] has a major influence on the SY curves slope and on the experimental time scale. To demonstrate the pressure effect on internal energy distribution, three models (threshold, thermal and collisional) based on RRKM theory were built using the Masskinetics software. As a result, the limit of each model is discussed, and the investigation demonstrates that the thermal model, using truncated Maxwell‐Boltzmann internal energy distribution, is well‐suited for simulating the experimental data at high pressure widely used in the analytical conditions. Copyright © 2013 John Wiley & Sons, Ltd.     

High Speed Video Camera and Electrical Signal Analyses of Arcs Behavior in a 3-Phase AC Arc Plasma Torch

A 3-phase AC plasma torch has been developed and aims at overcoming some limits of the classical DC torches in terms of efficiency, cost and reliability. However, the arc behavior in 3-phase plasma torch remains poorly explored. This paper is dedicated to the high speed video camera at 100,000 frames per second and electrical signal analyses of arcs behavior in a 3-phase AC arc plasma torch. First, a reference case at 150 A, in nitrogen as working gas, has been deeply analyzed. Afterwards, a parametric study based on current and inter-electrode gap has been carried out. Results show that only one arc can exist at a given time and arcs rotate by switching from a pair of electrodes to another one, following the maximal electrical gap potential. However, a particular “abnormal” arc behavior was sometimes observed. Indeed, the arc motion within the inter-electrode gap increases the heat exchange and stabilizes the 3-phase discharge whereas the system is unbalanced when the arc is in the periphery. The analysis highlights that the arc motion is strongly influenced by the electrode jet velocity and repulsive Lorentz forces. The parametric study shows that the current increases both jet velocity and arc discharge stability. Elsewhere, the increase of the inter-electrode gap can also stabilizes the electrical 3-phase arc discharge. Furthermore, the correlation between arc motion and current waveform is highlighted. This work is likely to open the way toward a better understanding of 3-phase discharges in the perspective of their further optimization.     

Volatile organic compounds in an urban environment: a comparison among Belgium,Vietnam and Ethiopia

The effects of urban and indoor air pollution on human health are a major environmental concern for all, but not much has been researched in the developing world. Specifically, quantitative data on the occurrence of volatile organic compounds (VOCs) – main contributors to air pollution – in Asia and Africa are scarce compared to the availability of data in the developed world. This paper presents one of the first studies focusing on the analysis and occurrence of VOCs in Vietnam and Ethiopia, which constitutes part of the novelty of this work. A spectrum of 34 VOCs was measured at eight different urban sites in Ghent (Belgium), Hanoi (Vietnam), Jimma and Addis Ababa (Ethiopia) during three sampling campaigns from September 2008 to September 2010. Sampling was done in an active way by means of sorbent tubes filled with Tenax TA. The analysis was done by TD-GC-MS using internal standard calibration. Data were interpreted and compared in terms of (i) individual, subgroup and total VOCs concentration (TVOCs), (ii) indoor-to-outdoor (I/O) concentration ratios, (iii) source identification by diagnostic ratio and/or correlation coefficients, and (iv) ozone formation potential (OFP) at outdoor sites based on up-to-date maximum incremental reactivity (MIR). I/O concentration ratios varied between 0.2 and 30, with big differences noticed with respect to the type of VOC(s) considered and the type of outdoor sampling location. The highest TVOC concentrations were measured in street samples with maximum values of 54?µg/m³ in Ghent, 507?µg/m³ in Hanoi and 318?µg/m³ in Addis Ababa illustrating the large difference in ambient air quality levels. This is also reflected in the arithmetic mean OFP values (µg/m³) of 82, 1308 and 596 in Ghent, Hanoi and Addis Ababa, respectively. Results of this study could be helpful to support formulation of national policy with regard to ambient air quality.     

Synthesis of Derivatives of 2,6-Dideoxy-2,2-Difluoro-3-O-Methyl-l-Arabinopyranose (2,2-Difluorooleandrose)

Abstract

L-Oleandrose is the carbohydrate constituent of the potent anthelmintic agents the avermectins. Diethylaminosulfur tri-fluoride treatment of appropriate uloses did not give gem-difluoro sugars. Trifluorofluoroxymethane or xenon difluoride addition to the double bond of 4-O-benzoyl-6-deoxy-2-fluoro-3-O-methyl-L-glucal produced protected 2,2-difluorooleandrose derivatives activated at their anomeric center and ready for glycosidation.     

A Designed 5‐Fluorouracil‐Based Bridged Silsesquioxane as an Autonomous Acid‐Triggered Drug‐Delivery System

Two new prodrugs, bearing two and three 5‐fluorouracil (5‐FU) units, respectively, have been synthesized and were shown to efficiently treat human breast cancer cells. In addition to 5‐FU, they were intended to form complexes through H‐bonds to an organo‐bridged silane prior to hydrolysis‐condensation through sol–gel processes to construct acid‐responsive bridged silsesquioxanes (BS). Whereas 5‐FU itself and the prodrug bearing two 5‐FU units completely leached out from the corresponding materials, the prodrug bearing three 5‐FU units was successfully maintained in the resulting BS. Solid‐state NMR (²⁹Si and ¹³C) spectroscopy show that the organic fragments of the organo‐bridged silane are retained in the hybrid through covalent bonding and the ¹H NMR spectroscopic analysis provides evidence for the hydrogen‐bonding interactions between the prodrug bearing three 5‐FU units and the triazine‐based hybrid matrix. The complex in the BS is not affected under neutral medium and operates under acidic conditions even under pH as high as 5 to deliver the drug as demonstrated by HPLC analysis and confirmed by FTIR and ¹³C NMR spectroscopic studies. Such functional BS are promising materials as carriers to avoid the side effects of the anticancer drug 5‐FU thanks to a controlled and targeted drug delivery.     

Osteopontin: A Uranium Phosphorylated Binding‐Site Characterization

Herein, we describe the structural investigation of one possible uranyl binding site inside a nonstructured protein. This approach couples spectroscopy, thermodynamics, and theoretical calculations (DFT) and studies the interaction of uranyl ions with a phosphopeptide, thus mimicking a possible osteopontin (OPN) hydroxyapatite growth‐inhibition site. Although thermodynamical aspects were investigated by using time‐resolved laser fluorescence spectroscopy (TRLFS) and isothermal titration calorimetry (ITC), structural characterization was performed by extended X‐ray absorption fine structure (EXAFS) at the U L_III‐edge combined with attenuated total reflection Fourier transform infrared (ATR‐FTIR) spectroscopy. From the vibrational and fluorescence spectra, several structural models of a UO₂²⁺/peptide complex were developed and subsequently refined by using theoretical calculations to fit the experimental EXAFS obtained. The structural effect of the pH value was also considered under acidic to moderately acidic conditions (pH 1.5–5.5). Most importantly, the uranyl/peptide coordination environment was similar to that of the native protein.     

Polymerization of Ethylene by Silica‐Supported Dinuclear CrIII Sites through an Initiation Step Involving C?H Bond Activation

The insertion of an olefin into a preformed metal–carbon bond is a common mechanism for transition‐metal‐catalyzed olefin polymerization. However, in one important industrial catalyst, the Phillips catalyst, a metal–carbon bond is not present in the precatalyst. The Phillips catalyst, CrO₃ dispersed on silica, polymerizes ethylene without an activator. Despite 60 years of intensive research, the active sites and the way the first Cr C bond is formed remain unknown. We synthesized well‐defined dinuclear Cr^II and Cr^III sites on silica. Whereas the Cr^II material was a poor polymerization catalyst, the Cr^III material was active. Poisoning studies showed that about 65 % of the Cr^III sites were active, a far higher proportion than typically observed for the Phillips catalyst. Examination of the spent catalyst and isotope labeling experiments showed the formation of a Si–(μ‐OH)–Cr^III species, consistent with an initiation mechanism involving the heterolytic activation of ethylene at Cr^III O bonds.