Influence of increasing zinc contents in brass in the early stages of corrosion investigated by in-situ TM-AFM and SIMS

In-situ tapping mode atomic force microscopy (TM-AFM), a powerful, high-resolution imaging technique for determining the structure of surfaces and ex-situ secondary ion mass spectroscopy (SIMS), a multielement, high-depth-resolution method, were used to examine the influence of increasing zinc contents in brass in the early stages of corrosion. Four different samples (pure Cu, pure Zn, Cu/Zn=90/10 wt% and Cu/Zn=70/30 wt%) were studied in order to determine their chemical behaviour under various atmospheric conditions. The in-situ TM-AFM investigations were carried out in synthetic air with 60% relative humidity (RH) and 80% RH with 250 ppb SO(2). The samples for the ex-situ SIMS experiments were weathered over a period of 60 h in 80% RH and 250 ppb SO(2). The in-situ TM-AFM investigations have shown that an increasing Zn content in brass increases the corrosion rate.     

The Isocyanide–Cyanide Rearrangement; Mechanism and Preparative Applications

Until recently the isocyanide–cyanide rearrangement was of interest almost solely as an example of a unimolecular gas-phase reaction, and kinetic studies had been carried out in only a few simple cases. Kinetic measurements in solution were made possible only by the discovery and suppression of a parallel free-radical chain process which leads to the same products. The rate of the isomerization is almost independent of the structure of the starting material and of the substituents present. An exception is provided by extreme steric hindrance in three dimensions which, as in tris-α-substituted triptycyl isocyanides, leads to a considerable increase in the activation energy. The results can be interpreted in terms of a purely sigmatropic mechanism, as predicted by ab initio calculations. The preparative application of this rearrangement reaction requires the suppression of side reactions and can best be carried out by flash pyrolysis; yields are then almost quantitative. Allyl isocyanides react without allyl isomerization, optically active isocyanides with complete retention of configuration. New, economically interesting syntheses for the known nonsteroidal anti-inflammatory drugs ibuprofen and (S)-naproxene are described. The application of the useful synthetic building blocks, the optically active β-acyloxy cyanides, which are formed from optically active α-amino acids, will be demonstrated.     

EXAFS Spectroscopy of the Alkoxide Precursor Zr(O n Bu)4 and its Modification in Solution

Summary. The molecular structure of the transition metal alkoxide Zr(OⁿBu)₄ in toluene and its modification by addition of i-propanol, tetrahydrofurane, and the coordinating ligand pentane-1,3-dione (Hacac) were investigated by extended X-ray absorption fine structure (EXAFS) and X-ray absorption near edge structure (XANES) spectroscopy. Zr(OⁿBu)₄ dissolved in toluene forms dimers. It was proved that cluster size is a function of the number of added equivalents ligand. In contrast, the addition of i-propanol or tetrahydrofurane caused no structural changes observable by EXAFS spectroscopy. A detailed discussion of the structural models is given in terms of possible alternatives and errors within the EXAFS analysis.     

C45- and C50-Carotehoids. Part 8. Synthesis of (all-E,2S,2′S)-bacterioruberin, (all-E,2S,2′S)-monoanhydrobacterioruberin, (all-E,2S,2′S)-bisanhydrobacterioruberin, (all- E,2R,2′R)-3,4,3′,4′-tetrahydrobisanhydro- bacterioruberin,and (all-E,S)-2-isopentenyl-3,4-dehydrorhodopin

Starting from (R)-3-hydroxybutyric acid ((R)- 10 ) the C₄₅- and C₅₀-carotenoids (all-E,2S,2′S)-bacterioruberm ( 1 ), (all-E,2S,2′S)-monoanhydrobacterioruberin ( 2 ), (all-E,2S,2′S)-bisanhydrobacterioruberin ( 3 ), (all-E,2R,2′R)-3,4,3′,4′-tetrahydrobisanhydrobacterioruberin ( 5 ), and (all-E,S)-2-isopentenyl-3,4-dehydrorhodopin ( 6 ) were synthesized. By comparison of the chiroptical data of the natural and the synthetic compounds, the (2S)- and (2′S)-configuration of the natural products 1–3 and 6 was established.     

Simultaneous determination of capecitabine and its metabolite 5-fluorouracil by column switching and liquid chromatographic/tandem mass spectrometry

A liquid chromatographic/tandem mass spectrometric method was developed and validated for the quantitation of capecitabine and its metabolite 5-fluorouracil in human plasma. The simultaneous determination of both analytes was achieved by a column switching method using a trapping column and two analytical columns with different stationary phases. Isocratic elution was used for the separation of capecitabine on a C18 column whereas 5-fluorouracil was separated using gradient elution on an non-polar carbon phase. The calibration curves were linear for both compounds with a correlation factor (R2) > 0.9993 for 5-fluorouracil and >0.9942 for capecitabine. The assay was validated in the concentration range 5.00-1000 ng ml(-1) for both compounds. The intra-day precision was better than 10% for 5-fluorouracil and better than 11% for capecitabine whereas the inter-day precision was better than 8% for 5-fluorouracil and better than 14% for capecitabine.     

Synthesis of functional Δ-1,3,5-oxazaphospholene and 2H-1,4,2-diazaphosphole complexes via catalytic ring expansion reactions of a 2H-azaphosphirene complex

Catalytically-induced ring expansion of 2H-azaphosphirene complex 1 using ferrocenium hexafluorophosphate and acetone (2), diethylketone (3), cyclohexanone (4), benzaldehyde (5) or para-hydroxy-benzaldehyde (6) furnished selectively the Δ³-1,3,5-oxazaphospholene complexes 7-11, whereas with ortho- and para-hydroxy- or ortho- and para-amino-substituted benzonitriles the 2H-1,4,2-diazaphosphole complexes 16-19 were obtained. Two further findings are noteworthy: (1) The significant decreased reaction time in the case of the sterically more demanding carbonyl derivatives 2-4 and (2) the formation of diastereomers in the case of 10 and 11 with a ratio of 8:1 and 9:1, respectively. All products were characterized by NMR, MS and elemental analysis and the configuration of complexes 7 and 10a were determined by X-ray single-crystal diffraction analysis.     

Kristallstruktur und Konformation eines linearen Pentapyrrols

The crystal structure of the pentapyrrin1 was determined by X-ray diffraction methodes at two temperatures (298K and 97K). It is the first structure determination of a linear polypyrrole with more than four pyrrole rings. In the crystal, the molecule is located on a crystallographic two-fold axis, which passes through the central pyrrole ring. It assumes a helical overall-conformation, which is stabilized by intramolecular hydrogen bonding. The acidic proton at the nitrogen atom of the central pyrrolic ring is disordered, being observed with half occupancy at two symmetry-equivalent positions off the crystallographic diad. Attempts to remove the disorder by cooling to 97K were unsuccessful, since no indication for a phase transition was detected.

     

Hierarchical assembly of helicate-type dinuclear titanium(IV) complexes

The ligands 4-7-H(2) were used in coordination studies with titanium(IV) and gallium(III) ions to obtain dimeric complexes Li(4)[(4-7)(6)Ti(2)] and Li(6)[(4/5a)(6)Ga(2)]. The X-ray crystal structures of Li(4)[(4)(6)Ti(2)], Li(4)[(5b)(6)Ti(2)], and Li(4)[(7a)(6)Ti(2)] could be obtained. While these complexes are triply lithium-bridged dimers in the solid state, a monomer/dimer equilibrium is observed in solution by NMR spectroscopy and ESI FT-ICR MS. The stability of the dimer is enhanced by high negative charges (Ti(IV) versus Ga(III)) of the monomers, when the carbonyl units are good donors (aldehydes versus ketones and esters), when the solvent does not efficiently solvate the bridging lithium ions (DMSO versus acetone), and when sterical hindrance is minimized (methyl versus primary and secondary carbon substituents). The dimer is thermodynamically favored by enthalpy as well as entropy. ESI FT-ICR mass spectrometry provides detailed insight into the mechanisms with which monomeric triscatecholate complexes as well as single catechol ligands exchange in the dimers. Tandem mass spectrometric experiments in the gas phase show the dimers to decompose either in a symmetric (Ti) or in an unsymmetric (Ga) fashion when collisionally activated. The differences between the Ti and Ga complexes can be attributed to different electronic properties and a charge-controlled reactivity of the ions in the gas phase. The complexes represent an excellent example for hierarchical self-assembly, in which two different noncovalent interactions of well balanced strengths bring together eleven individual components into one well-defined aggregate.     

Identification of an activated catalyst in the iridium-catalyzed allylic amination and etherification. Increased rates, scope, and selectivity

Studies were conducted to determine possible intermediates in the highly enantioselective, iridium-catalyzed amination and etherification of allylic carbonates, and these studies revealed that cyclometalation of the phosphoramidite ligand is likely to generate the active catalyst. The square-planar [Ir(COD)(L1)Cl] (L1 = P(BINOL)(bisphenethylamine)) did not react with cinnamyl carbonate, but did react with amine to generate an Ir(I) trigonal bipyramidal complex coordinated by COD, a cyclometalated kappa2-phosphoramidite, and a kappa1-phosphoramidite. This complex reacted with phosphines to generate products from replacement of the kappa1-phosphoramidite. These cyclometalated complexes were highly active catalysts for allylic amination and etherification and retained the high selectivity of the original catalyst system. In addition, these complexes combined with [Ir(cod)Cl]2 catalyzed reactions of amines with lower loadings, catalyzed reactions of alkylamines and aromatic amines that did not react with the original catalyst system, and catalyzed reactions of phenoxides under milder conditions.     

Correlation between Solution and the Solid State: The pH Dependent Composition in the Ternary System [Co(H2O)6]2+ or [Ni(H2O)6]2+/Piperazine/Phosphate

The protolytic equilibria of piperazine (C₄H₁₀N₂) and phosphate have been investigated in the presence of cobalt or nickel chloride or nitrate by potentiometric titrations between pH 2 and 8. Potentiometric titrations suggest the presence of [M²⁺(H₂O)₅(C₄H₁₁N₂⁺)]³⁺ and [M²⁺(H₂O)₅(C₄H₁₀N₂)]²⁺ in solution with stability constants logK of 3.1 and 3.8 for M = Co and 3.1 and 3.6 for M = Ni, respectively. Crystallization experiments were then conducted at selected pH values to isolate desired species from the known solution composition. Crystallization afforded [M(H₂O)₆]²⁺(C₄H₁₂N₂²⁺)(HPO₄^2—)₂ at pH 3.5 and 6.2 (M = Co, Ni), and Co₃(PO₄)₂·8H₂O at pH 10.5. No crystals with the dihydrogenphosphate anion or a metal‐bound piperazine ligand could be isolated under the reaction conditions. The solid‐state assembly in the isomorphous structures of [M(H₂O)₆](C₄H₁₂N₂)(HPO₄)₂ with M = Co and Ni is based on an extended hydrogen bonded network between the three ionic building blocks.