Octahedral (cis-cyclam)iron(III) complexes with O,N-coordinated o-iminosemiquinonate(1-) pi radicals and o-imidophenolate(2-) anions

Three octahedral complexes containing a (cis-cyclam)iron(III) moiety and an O,N-coordinated o-iminobenzosemiquinonate pi radical anion have been synthesized and characterized by X-ray crystallography at 100 K: [Fe(cis-cyclam)(L(1-3)(ISQ))](PF(6))(2) (1-3), where (L(1-3)(ISQ)) represents the monoanionic pi radicals derived from one-electron oxidations of the respective dianion of o-imidophenolate(2-), L(1), 2-imido-4,6-di-tert-butylphenolate(2-), L(2), and N-phenyl-2-imido-4,6-di-tert-butylphenolate(2-), L(3). Compounds 1-3 possess an S(t) = 0 ground state, which is attained via strong intramolecular antiferromagnetic exchange coupling between a low-spin central ferric ion (S(Fe) = 1/2) and an o-imino-benzosemiquinonate(1-) pi radical (S(rad) = 1/2). Zero-field M?ssbauer spectra of 1-3 at 80 K confirm the low-spin ferric electron configuration: isomer shift delta = 0.26 mm s(-1) and quadrupole splitting DeltaE(Q) = 1.96 mm s(-1) for 1, 0.28 and 1.93 for 2, and 0.33 and 1.88 for 3. All three complexes undergo a reversible, one-electron reduction of the coordinated o-imino-benzosemiquinonate ligand, yielding an [Fe(III)(cis-cyclam)(L(1-3)(IP))](+) monocation. The monocations of 1 and 2 display very similar rhombic signals in the X-band EPR spectra (g = 2.15, 2.12, and 1.97), indicative of low-spin ferric species. In contast, the monocation of 3 contains a high-spin ferric center (S(Fe) = 5/2) as is deduced from its M?ssbauer and EPR spectra.     

Metal- and ligand-directed one-pot syntheses,crystal structures,and properties of novel oxo-centered tetra- and hexametallic clusters

Starting from closely related metal-ligand combinations, completely different oligomeric metal clusters are synthesized. Whereas, picoline-tetrazolylamide HL(1) (1) and zinc or nickel acetate afforded [2x2] grids [M(4)(L(1))(8)] (2), slightly different N-(2-methylthiazole-5-yl)-thiazole-2-carboxamide HL(2) (5 a) and nickel acetate yielded the monometallic complex [Ni(L(2))(2)(OH(2))(2)] (6). In contrast, reaction of 5 a with zinc acetate produced the tetrametallic zinc cluster [Zn(4)O(L(2))(4)(OAc)(2)] (7). Even more surprising, when 3-methyl-substituted HL(3) (5 b) instead of 2-methyl-substituted HL(2) (5 a) was allowed to react under identical conditions with zinc acetate, the cluster [Zn(4)O(L(3))(4)Cl(2)] (8) crystallized from dichloromethane. Clusters 7 and 8 are isostructural. As for 7, in 8 two of the edges of the tetrahedron of zinc ions are doubly bridged, two are singly bridged, and the other two are nonbridged. On the other hand, when iron(II) acetate under aerobic conditions was allowed to react with 5 a, the unprecedented complex [[Fe(3)O(L(2))(2)(OAc)(4)](2)O] (9) was isolated. Cluster 9 is composed of two trimetallic, triangular mu(3)-O(2-)-centered [Fe(3)O(L(2))(2)(OAc)(4)](+) modules, linked by an almost linear mu(2)-O(2-) bridge. The M?ssbauer spectrum together with cyclic voltammetric and square-wave voltammetric measurements of 9 are reported, and 6-9 were characterized unequivocally by single-crystal X-ray structure analyses.     

Single-crystal structures of polyphenylene dendrimers

A series of first-generation polyphenylene dendrimers based on three different cores were prepared by Diels-Alder cycloaddition and their single-crystal structures were determined. Consisting exclusively of interlocked, twisted phenyl rings, these polyphenylene nanostructures have exciting structural and dynamic properties. Single crystals of dendrimers, suitable for X-ray structure analysis, were grown from different solvent mixtures by slow evaporation at room temperature. It should be pointed out that one of the described polyphenylene dendrimers represents up to now the biggest oligophenylene nanostructure from which crystallographic data is available.     

Anab initio investigation of Cu2Se and Cu4Se2

Summary Experimentally known copper selenium clusters show extraordinary geometrical features, especially short Cu-Cu distances. We report the first theoretical investigation of Cu₂Se and Cu₄Se₂. Various quantum chemical methods (SCF, MP2, CPF, CCSD, CCSD(T), LDF) are applied to determine the importance of dynamic electron correlation. We find that inclusion of correlation does not essentially change the electronic structure of the clusters but has a strong influence on geometries. To reduce the computational effort we apply effective core potentials (ECPs) in combination with small, but carefully optimized basis sets. The applicability of simple modellings of correlation energies for approximate inclusion of correlation effects in SCF geometry optimizations is tested.     

A vibrational spectroscopic study of the adsorption of 4,4′-bipyridyl by sepiolite and smectite group clay minerals from Anatolia (Turkey)

The adsorption of 4,4-bipyridyl by natural sepiolite and smectite group clay minerals (bentonite, hectorite and saponite) from Anatolia (Turkey) has been studied using vibrational spectroscopy. Investigation of Fourier-transform infrared and Fourier-transform Raman spectra of adsorbed 4,4-bipyridyl indicate the presence of chemisorbed species. However, any evidence for the generation of anionic species on the surface of the phyllosilicates has not been detected. It is proposed that the adsorbed bipyridyl molecules on sepiolite are centrosymmetric and H-bonded to the surface hydroxyls through both the nitrogen lone pairs as bidentate ligands. The adsorbed bipyridyl molecules on the smectite group clays are coordinated to exchangeable cations both directly and also indirectly through water as monodentate ligands. XRD patterns of the clays studied are also recorded.     

The Synthesis of Dibenzo[3n]crown-n by Novel Methods and their Cation Binding Studied by Fluorescence Spectroscopy. Part IV

The dibenzo[3n]crown-n were synthesised from1,2-bis(o-hydroxyphenoxy)ethane obtained from 1,2-bis(o-formylphenoxy)ethane via Bayer-Willigeroxidations with H₂O₂/CH₃COOH in good yields. The cyclic condensation of 1,2-bis(o-hydroxyphenoxy)ethanewith dichlorides, and ditosylates of polyethylene glycols in DMF/Me₂CO₃ gave the macrocyclesdibenzo[15]crown-5, dibenzo[18]crown-6, dibenzo[21]crown-7 anddibenzo[24]crown-8. The structures were identified using IR, mass, ¹H and ¹³C NMR spectroscopy. Therecognition of the molecules for the cations, Li⁺, Na⁺, K⁺, Rb⁺ and Zn²⁺were conducted quantitatively with steady state fluorescencespectroscopy. The 1:1 association constants in acetonitrileshowed a good relation of the appropriate size of the macrocyclic ether towards the fitting cationradii. Namely, dibenzo[15]crown-5 was the best for Li⁺ binding and more than 100 times better thanNa⁺ and K⁺. Dibenzo[21]crown-7 was excellent for Rb⁺ binding while K⁺ is 100 timesless preferred. The largest crown ether studied, dibenzo[24]crown-8, exhibited the order of binding power,Rb⁺ > K⁺ > Na⁺. Zn²⁺ displayed, however, a marked binding with only dibenzo[18]crown-6.p>     

Structural and Chemical Analysis of Materials with High Spatial Resolution

 An understanding of the correlation between microstructures and properties of materials require the characterization of the material on many different length scales. Often the properties depend primarily on the atomistics of defects, such as dislocations and interfaces. The different techniques of transmission electron microscopy allow the characterization of the structure and of the chemical composition of materials with high spatial resolution to the atomic level: high resolution transmission electron microscopy allows the determination of the position of the columns of atoms (ions) with high accuracy. The accuracy which can be achieved in these measurements depends not only on the instrumentation but also on the quality of the transmitted specimen and on the scattering power of the atoms (ions) present in the analyzed column. The chemical composition can be revealed from investigations by analytical microscopy which includes energy dispersive X-ray spectroscopy, mainly quantitatively applied for heavy elements, and electron energy-loss spectroscopy. Furthermore, the energy-loss near-edge structure of EELS data results in information on the local band structure of unoccupied states of the excited atoms and, therefore, on bonding. A quantitative evaluation of convergent beam electron diffraction results in information on the electron charge density distribution of the bulk (defect-free) material. The different techniques are described and applied to different problems in materials science. It will be shown that nearly atomic resolution can be achieved in high resolution electron microscopy and in analytical electron microscopy. Recent developments in electron microscopy instrumentation will result in atomic resolution in the foreseeable future.     

On the Chemistry of a Dibenzohypericin Derivative

Summary.  A hypericin derivative was synthesized in which instead of the methyl groups two benzene rings were condensed to the chromophoric system in order to extend its conjugation. This derivative showed lowered fluorescence and concomitantly enhanced sensitized production of active oxygen species as compared to hypericin. However, in contrast to intuition its long wavelength band remained unshifted in comparison to its parent compound hypericin. Geometry and absorption properties were also investigated by means of semiempirical calculations. Received July 27, 2001. Accepted August 9, 2001     

Infrared-optical properties of vapour-deposited metal films

Spectroscopic infrared ellipsometry was applied to determine the optical constants of thin metal layers deposited on dielectric substrates such as glass or CaF(2). The layers were produced by evaporating gold or silver in a vacuum, and the coverage, that is the deposited mass per area, was chosen in the range 80-1200 mg m(-2) for gold, which refers to thicknesses in the lower nanometer range; in the case of the specifically lighter silver, about half the coverage was applied. At low coverage a metal island structure is obtained, which gives rise to surface-enhanced infrared absorption (SEIRA). Depending on the coverage, the deposited films exhibit either dielectric or metallic optical properties. Atomic force microscopy and conductivity measurements complement the spectroscopic observation.