Systematic investigations of anthocyanin–metal interactions by Raman spectroscopy

The FT‐Raman spectra of the chloride salts of pelargonidin‐3‐glucoside, cyanidin‐3‐glucoside and delphinidin‐3‐glucoside, their structures at pH 5.0 and their interaction with aluminium and ferric ions are presented for the first time and discussed with regard to their spectroscopic response. Two marker bands at approximately 1510 and 1330/1350 cm⁻¹ and one band at approximately 1330/1350 cm⁻¹ were identified being characteristic for the formation of ferric and aluminium chelates, respectively, of cyanidin‐3‐glucoside and delphinidin‐3‐glucoside. In contrast, pelargonidin‐3‐glucoside, exhibiting one single hydroxyl group in the B‐ring, did not form metal chelates, which could be clearly demonstrated by missing marker bands. The formation of anthocyanin–metal chelates was also verified in model systems containing commercial sugar beet pectin and a pectic polysaccharide fraction isolated thereof, respectively. In addition, the absence of anthocyanin–metal chelates in systems prepared with citrate buffer was confirmed, and the effects of low and high methoxylated citrus pectins on chelate formation were studied. Copyright © 2012 John Wiley & Sons, Ltd.     

Simultaneous measurement of localized heat release with OH/CH2O-LIF imaging and spatially integrated OH∗ chemiluminescence in turbulent swirl flames

The in-situ and localized observation of heat release in turbulent flames is important for the validation of computational modeling of turbulent flows with combustion. In the present work we obtain localized information on heat release rate (HRR) by the commonly accepted technique of the simultaneous and single-shot planar imaging of OH and CH₂O concentrations by laser-induced fluorescence (LIF). Additionally, we combine this with the simultaneous line-of-sight and temporally resolved chemiluminescence detection of OH^?, spatially integrated within the flame volume, interrogated by the laser sheets used for the HRR imaging technique. The combined diagnostic methods are demonstrated for a swirl-stabilized, premixed turbulent methane/air flame of 30-kW thermal power, and they show the existence of correlations between both HRR-sensitive diagnostic techniques.     

Phase separation in semidilute aqueous poly(N-isopropylacrylamide) solutions

The phase separation mechanism in semidilute aqueous poly(N-isopropylacrylamide) (PNIPAM) solutions is investigated with small-angle neutron scattering (SANS). The nature of the phase transition is probed in static SANS measurements and with time-dependent SANS measurements after a temperature jump. The observed critical exponents of the phase transition describing the temperature dependence of the Ornstein-Zernike amplitude and correlation length are smaller than values from mean-field theory. Time-dependent SANS measurements show that the specific surface decreases with increasing time after a temperature jump above the phase transition. Thus, the formation of additional hydrogen bonds in the collapsed state is a kinetic effect: A certain fraction of water remains as bound water in the system. Moreover, H-D exchange reactions observed in PNIPAM have to be taken into account.     

Thermoresponsive hydrogels from symmetrical triblock copolymers poly(styrene-block-(methoxy diethylene glycol acrylate)-block-styrene)

A series of symmetrical, thermo-responsive triblock copolymers was prepared by reversible addition-fragmentation chain transfer (RAFT) polymerization, and studied in aqueous solution with respect to their ability to form hydrogels. Triblock copolymers were composed of two identical, permanently hydrophobic outer blocks, made of low molar mass polystyrene, and of a hydrophilic inner block of variable length, consisting of poly(methoxy diethylene glycol acrylate) PMDEGA. The polymers exhibited a LCST-type phase transition in the range of 20-40 °C, which markedly depended on molar mass and concentration. Accordingly, the triblock copolymers behaved as amphiphiles at low temperatures, but became water-insoluble at high temperatures. The temperature dependent self-assembly of the amphiphilic block copolymers in aqueous solution was studied by turbidimetry and rheology at concentrations up to 30 wt %, to elucidate the impact of the inner thermoresponsive block on the gel properties. Additionally, small-angle X-ray scattering (SAXS) was performed to access the structural changes in the gel with temperature. For all polymers a gel phase was obtained at low temperatures, which underwent a gel-sol transition at intermediate temperatures, well below the cloud point where phase separation occurred. With increasing length of the PMDEGA inner block, the gel-sol transition shifts to markedly lower concentrations, as well as to higher transition temperatures. For the longest PMDEGA block studied (DP(n) about 450), gels had already formed at 3.5 wt % at low temperatures. The gel-sol transition of the hydrogels and the LCST-type phase transition of the hydrophilic inner block were found to be independent of each other.     

Surface-initiated synthesis of poly(3-methylthiophene) from indium tin oxide and its electrochemical properties

Poly(3-methylthiophene) (P3MT) was synthesized directly from indium tin oxide (ITO) electrodes modified with a phosphonic acid initiator, using Kumada catalyst transfer polymerization (KCTP). This work represents the first time that polymer thickness has been controlled in a surface initiated KCTP reaction, highlighting the utility of KCTP in achieving controlled polymerizations. Polymer film thicknesses were regulated by the variation of the solution monomer concentration and ranged from 30 to 265 nm. Electrochemical oxidative doping of these films was used to manipulate their near surface composition and effective work function. Doped states of the P3MT film are maintained even after the sample is removed from solution and potential control confirming the robustness of the films. Such materials with controllable thicknesses and electronic properties have the potential to be useful as interlayer materials for organic electronic applications.     

Nano-organized collagen layers obtained by adsorption on phase-separated polymer thin films

The organization of adsorbed type I collagen layers was examined on a series of polystyrene (PS)/poly(methyl methacrylate) (PMMA) heterogeneous surfaces obtained by phase separation in thin films. These thin films were prepared by spin coating from solutions in either dioxane or toluene of PS and PMMA in different proportions. Their morphology was unraveled combining the information coming from X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), and water contact angle measurements. Substrates with PMMA inclusions in a PS matrix and, conversely, substrates with PS inclusions in a PMMA matrix were prepared, the inclusions being either under the form of pits or islands, with diameters in the submicrometer range. The organization of collagen layers obtained by adsorption on these surfaces was then investigated. On pure PMMA, the layer was quite smooth with assemblies of a few collagen molecules, while bigger assemblies were found on pure PS. On the heterogeneous surfaces, it appeared clearly that the diameter and length of collagen assemblies was modulated by the size and surface coverage of the PS domains. If the PS domains, either surrounding or surrounded by the PMMA phase, were above 600 nm wide, a heterogeneous distribution of collagen was found, in agreement with observations made on pure polymers. Otherwise, fibrils could be formed, that were longer compared to those observed on pure polymers. Additionally, the surface nitrogen content determined by XPS, which is linked to the protein adsorbed amount, increased roughly linearly with the PS surface fraction, whatever the size of PS domains, suggesting that adsorbed collagen amount on heterogeneous PS/PMMA surfaces is a combination of that observed on the pure polymers. This work thus shows that PS/PMMA surface heterogeneities can govern collagen organization. This opens the way to a better control of collagen supramolecular organization at interfaces, which could in turn allow cell-material interactions to be tailored.     

Ultrasonics in food processing

In recent years, the physical and chemical effects of ultrasound in liquid and solid media have been extensively used in food processing applications. Harnessing the physical forces generated by ultrasound, in the absence and presence of cavitation, for specific food processing applications such as emulsification, filtration, tenderisation and functionality modification have been highlighted. While some applications, such as filtration and emulsification are "mature" industrial processes, other applications, such as functionality modification, are still in their early stages of development. However, various investigations discussed suggest that ultrasonic processing of food and dairy ingredients is a potential and viable technology that will be used by many food industries in the near future.     

A comparative study of the luminescence characteristics of polymineral fine grains and coarse-grained K- and Na-rich feldspars

The IRSL and post-IR IRSL (pIRIR) signal characteristics of polymineral fine grains are investigated and compared with those of K- and Na-rich feldspar extracts. TL signal loss after IR and pIRIR stimulations occurs mainly at around 320 °C for polymineral and Na-feldspar samples and around 410 °C for K-feldspar samples, when a preheat temperature of 250 °C for 60 s is used. After preheating to a higher temperature (320 °C for 60 s) all samples show a TL reduction around 410 °C in the blue detection window. Pulse annealing experiments for IRSL and pIRIR signals for preheats between 320 °C and 500 °C indicate that the signal stabilities are similar among the different feldspar types, when a higher preheat temperature (>320 °C) is used. Thermal activation energies for IRSL and pIRIR signals are largest in K-feldspar and smallest in polymineral fine grains, in both blue and UV detection windows for both fast time-resolved (TR) and continuous wave (CW) signals. These results suggest that IRSL and pIRIR signals in polymineral fine grains originate mainly from Na-feldspar grains; these signals are less thermally stable than those from K-feldspar, but a more stable signal (presumably from K-feldspar grains) can be obtained using a higher preheat temperature.     

Low loss propagation in slow light photonic crystal waveguides at group indices up to 60

We have designed slow light photonic crystal waveguides operating in a low loss and constant dispersion window of Δλ = 2 nm around λ = 1565 nm with a group index of n_g = 60. We experimentally demonstrate a relatively low propagation loss, of 130 dB/cm, for waveguides up to 800 μm in length. This result is particularly remarkable given that the waveguides were written on an electron-beam lithography tool with a writefield of 100 μm that exhibits stitching errors of typically 10–50 nm. We reduced the impact of these stitching errors by introducing “slow–fast–slow” mode conversion interfaces and show that these interfaces reduce the loss from 320 dB/cm to 130 dB/cm at n_g = 60. This significant improvement highlights the importance of the slow–fast–slow method and shows that high performance slow light waveguides can be realised with lengths much longer than the writing field of a given e-beam lithography tool.     

Coherent spectral enhancement of carrier-envelope-phase stable continua with dual-gas high harmonic generation

Attosecond science is enabled by the ability to convert femtosecond near-infrared laser light into coherent harmonics in the extreme ultraviolet spectral range. While attosecond sources have been utilized in experiments that have not demanded high intensities, substantially higher photon flux would provide a natural link to the next significant experimental breakthrough. Numerical simulations of dual-gas high harmonic generation indicate that the output in the cutoff spectral region can be selectively enhanced without disturbing the single-atom gating mechanism. Here, we summarize the results of these simulations and present first experimental findings to support these predictions.