From terminal alkynes directly to branched amines

The one-pot synthesis of several branched secondary aliphatic amines is described. Hydroamination of terminal alkynes with aliphatic primary amines in the presence of Cp₂Ti(η²-Me₃SiCCSiMe₃) gives the corresponding aldimines as intermediates. Reaction of these in situ produced aldimines with organolithium reagents (n-BuLi, PhLi) provides the α-branched amines in an easy way in upto 78% overall yield.     

Synthesis of a simplified bryostatin C-ring analogue that binds to the CRD2 of human PKC-alpha and construction of a novel BC-analogue by an unusual Julia olefination process

[structure: see text] The synthesis of two truncated bryostatin analogues 2 and 3 is described. High-field NMR measurements on the C-ring analogue 3 in C(2)H(3)CN containing 25% (2)H(2)O have shown that it binds to the CRD2 of human PKC-alpha at virtually the same position as phorbol-13-acetate (PA) and bryostatin 1 (1). NMR titration studies have also revealed that 3 binds to the CRD2 with a potency similar in magnitude to PA but much less potently than 1.     

Dérivés propargyliques,XII et dérivés de la décahydroquinoléine,II Alkynyl-4, alkényl-4 et alkyl-4-décahydroquinolinols-4 N-substitués

The authors describe the synthesis of decahydro-4-quinolinones and N-substituted 4-alkynyl-, 4-allyl- and 4-alkyldecahydro-4-quinolinols and discuss the stereochemical problems of this compounds.     

Benchmarking of ruthenium initiators for the ROMP of a norbornenedicarboxylic acid ester

The kinetic study of ring-opening metathesis polymerization (ROMP) of a diester functionalised norbornene derivative, (±)-exo,endo-bicyclo[2.2.1]hept-5-ene-2,3-dicarboxylic acid diethyl ester, with a series of ruthenium benzylidene complexes revealed the applicability of these initiators for well defined polymerization reactions. Values for the rate of initiation as well as the rate of propagation of the initiators were determined and correlated to the molecular weight and polydispersity of the isolated polymers. As the only initiator providing an entry to virtually monodisperse polymers the classical “first generation Grubbs-catalyst” was identified, while N-heterocyclic carbene based initiators polymerized with a rate of propagation much higher than the rate of initiation yielding polymers with a broader molecular weight distribution.     

Die Kristallstrukturen von KNdTe4, RbPrTe4 und RbNdTe4 — Untersuchungen zur thermischen Stabilität von KNdTe4 sowie Bemerkungen zu einigen anderen Vertretern der Zusammensetzung ALnTe4 (A = K,Rb, Cs und Ln = Seltenerd‐Metall)

Crystal Structures of KNdTe₄, RbPrTe₄, and RbNdTe₄ — Investigations concerning the Thermal Stability of KNdTe₄ as well as some Remarks concerning Additional Representatives of the Composition ALnTe₄ (A = K, Rb, Cs and Ln = Rare Earth Metal) Of the compounds ALnQ₄ (A = Na, K, Rb, Cs; Ln = Lanthanoid; Q = S, Se and Te) the crystal structures of the three new tellurides KNdTe₄, RbPrTe₄ and RbNdTe₄ were determined by X‐ray single‐crystal structure analysis and of the three additional new ones KCeTe₄, KPrTe₄ and CsNdTe₄ by X‐ray powder diffraction experiments. All six new compounds are isotypic with KCeSe₄. Characteristic for the crystal structure of the compounds mentioned above are layers built from (Q₂)^2— dumbbells in form of 4.3².4.3 nets with embedded cations A⁺ and Ln³⁺ between them, which are coordinated eightfold in form of square‐shaped antiprisms by Q ions. The distances Te‐Te within the dumbbells were found to be 277.8(2) pm for all investigated tellurides. By combination of X‐ray diffraction and DTA measurements it was shown that the compound KNdTe₄ is metastable at ambient temperature with a limited existence range between the temperatures 260 and 498 °C.     

Sulfoalkyl Ether β-Cyclodextrin Derivatives: Synthesis and Characterizations

A series of sulfoalkyl ether -cyclodextrin derivatives, including sulfoethyl, sulfopropyl and sulfobutyl ethyl -cyclodextrins, have been synthesized and characterized. Each sulfoalkyl ether -cyclodextrin is a mixture of various degrees of substitution and different positional isotherms. Elemental analysis, ¹H NMR, MS, and Differential Scanning Calorimetry analysis were used to determine the average degree of substitution for each -cyclodextrin derivative. The average degrees of substitution are 3.4, 1.6 and 2.5 for sulfoethyl, sulfopropyl and sulfobutyl ether -cyclodextrin, respectively. The water solubility of these derivatives is substantially higher than that of -cyclodextrin. ¹H NMR indicates thatsulfoethyl ether -cyclodextrin may have major substitution on the secondaryhydroxyl group while the major substitution in sulfopropyl and sulfobutyl ether-cyclodextrin could be on the primary hydroxyl group. MS spectra showthat no more than one substitution occurred on a single glucose unit.     

Novel open-chain and cyclic conformationally constrained (R)- and (S)-α,α-disubstituted tyrosine analogues

A series of novel open-chain and cyclic conformationally constrained (R)- and (S)-α,α-disubstituted tyrosine analogues 1a–e were synthesized in good yields and high optical purities (Schemes 1 and 2). The absolute configurations of these tyrosine analogues were unambiguously determined based on the X-ray structures of the precursor diastereoisomeric peptides of type 4 and 5 . Four of these structures are described (Figs. 1–4), showing β-turn type-I geometries for dipeptides 4a, 5b , and 4c and an extended conformation for peptide 5c (Table 3). The conversion of the free amino acids 1a–c into suitably protected building blocks 11a–d and 15d,e for peptide synthesis is discussed (Schemes 3 and 4).     

Effect of pressure on coupled electronic ground and excited states determined from luminescence spectra of trans-dioxorhenium(V) complexes

Pressure-dependent luminescence spectra of trans-dioxo complexes of rhenium(V) with ancillary ethylenediamine ligands exhibit resolved vibronic structure in the O=Re=O symmetric stretching mode at room temperature. The intensity distribution within the vibronic progression changes with pressure, leading to band shapes that are also pressure-dependent. These spectroscopic features arise from coupled electronic states and depend on the energy differences between ground and excited states, which vary by 2500 cm(-1) for the three complexes with ethylenediamine, tetramethylethylenediamine, and tetraethylethylenediamine ancillary ligands. We describe the pressure-dependent vibronic structure and band shapes with anharmonic adiabatic potential energy surfaces for the ground states of all complexes. The calculated spectra reveal the pressure dependence of the energies of electronic origins, luminescence band maximums, offsets between ground- and emitting-state potential minimums, and vibrational frequencies. The largest pressure effects are observed where the coupled electronic states are close in energy.     

Synthesis of cyclopentane amide DNA (cpa-DNA) and its pairing properties

We recently reported on the synthesis and pairing properties of the DNA analogue bicyclo[3.2.1]amide DNA (bca-DNA). In this analogue the nucleobases are attached via a linear, 4-bond amide-linker to a structurally preorganized sugar-phosphate backbone unit. To define the importance of the degree of structural rigidity of the bca-backbone unit on the pairing properties, we designed the structurally simpler cyclopentane amide DNA (cpa-DNA), in which the bicyclo[3.2.1]-scaffold was reduced to a cyclopentane unit while the base-linker was left unchanged. Here we present a synthetic route to the enantiomerically pure cpa-DNA monomers and the corresponding phosphoramidites containing the bases A and T, starting from a known, achiral precursor in 9 and 12 steps, respectively. Fully modified oligodeoxynucleotides were synthesized by standard solid-phase oligonucleotide chemistry, and their base-pairing properties with complementary oligonucleotides of the DNA-, RNA-, bca-DNA-, and cpa-DNA-backbones were assessed by UV melting curves and CD-spectroscopic methods. We found that cpa-oligoadenylates form duplexes with complementary DNA that are less stable by -2.7 degrees C/mod. compared to DNA. The corresponding cpa-oligothymidylates do not participate in complementary base-pairing with any of the investigated backbone systems except with its own (homo-duplex). As its congener bca-DNA, cpa-DNA seems to prefer left-handed helical duplex structures with DNA or with itself as indicated by the CD spectra.     

Wechselwirkungen in Kristallen. 106. Mitteilung. Die Klaviatur der Na⊕-Koordinationszahlen in ihren Carbazolanion-Salzen

Interaction in Crystals: The Keyboard of Na⊕ Coordination Numbers in Its Carbazole Anion Salts Some local minima in the shallow potential of the system carbazole anion, sodium cation, and the ethers tetrahydrofuran, 1,2-dimethoxyethane, diglyme, triglyme, tetraglyme, 15-crown-5 as well as 2.2.1-cryptand are explored experimentally and by quantum-chemical calculations. Three prototype contact-ion multiples of Na⊕-solvated carbazole anion M? salts have been crystallized and structurally characterized: polyether-solvated monomers [M?Na⊕_solv]₁, solvent-shared dimers [M?Na⊕_solv]₂, and solvent-separated polyions [(M?)nNa?_solv](^n?1)? [Na⊕_solv](n_?1). The Na⊕ coordination numbers stretch from 3 to 7 as illustrated by the compounds [(M?)₃Na+]??[Na+(2.2.1-crytand)]₂ for 3 and 7, [(M?)₂Na+(THF)₂]? [Na⊕(2.2.1-cryptand)] for 4 and 7, [M? Na+(diglyme)]₂ for 5, or [M? Na+(l 5-crown-5)] for 6. Structural comparison is based on literature analogies as well as on results of MNDO calculations concerning charge distribution and enthalpies of formation. Taken together, the results demonstrate the delicate energy balance, by which cation solvation can influence the formation of organic salts.