A novel drum piezoelectric-actuator

This paper presents a large displacement, piezoelectric-metal structure actuator, named the piezoelectric drum actuator. The drum actuator consists of a short, thick-walled steel cylinder sandwiched by two thin composite disks, which are fabricated from a brass disk bonded with a piezoceramic disk. The piezoceramic disk, which is polarized in its thickness direction, has a large diameter thickness ratio, producing a large radial displacement under an applied voltage in the thickness, leading to a large transverse deflection of the composite disks in the drum. The drum (outer diameter: 12.0 mm) has a displacement that is about eight times larger than that of a cymbal actuator made with the same ceramic material and comparable dimensions under the same dc driving voltage of 270 V. The drum actuator also showed a large resonance displacement of 56.7 μm under an ac voltage of 90 V. The effective piezoelectric charge coefficient d’₃₃ of the drum is about twice as large as that reported for the cymbal. PACS 77.65 -j; 85.50.+k; 43.38.fx     

JT-60U装置温度分布剖面不变性的实验研究

在一系列H模放电条件下，建立了一个旨在研究等离子体温度分布剖面不变性的数据库。介绍了数据库建立过程中要解决的关键问题和所用软件，对等离子体温度分布剖面不变性及芯部约束与边缘参数的关系进行了研究。     

Depolarizing a ferroelectric film by ac fields of diminishing amplitude

In this paper, we demonstrate that a sol-gel-derived lead zirconate titanate film can be depolarized by the application of ac fields of diminishing amplitude, and we explain the phenomenon based on the concept of the Preisach model. The amplitude of the ac fields is decreased from 19.5 MV/m to 0.2 MV/m in eight steps. The observed piezoelectric coefficient of the film decreases after each step and finishes with almost the same value as that of an as-deposited film. Our results also reveal the existence of a distribution of coercive fields in the microdomains (Preisach dipolar units), and that the P–E loop of each microdomain is shifted by interaction fields so that the magnitudes of its switch-up and switch-down fields are not necessarily the same. PACS 77.22.Ej; 77.70.+a; 77.90.+k     

An 15N NMR spin relaxation dispersion study of the folding of a pair of engineered mutants of apocytochrome b562

15N relaxation dispersion NMR spectroscopy has been used to study exchange dynamics in a pair of mutants of Rd-apocyt b562, a redesigned four-helix-bundle protein. An analysis of the relaxation data over a range of temperatures establishes that exchange in both proteins is best modeled as two-state and that it derives from the folding/unfolding transition. These results are in accord with predictions based on the reaction coordinate for the folding of the protein determined from native-state hydrogen exchange data [Chu, R.; Pei, W.; Takei, J.; Bai, Y. Biochemistry 2002, 41, 7998-8003]. The kinetics and thermodynamics of the folding transition have been characterized in detail. Although only a narrow range of temperatures could be examined, it is clear that the folding rate temperature profile is distinctly non-Arrhenius for both mutants, with the folding barrier for at least one of them entropic.     

Doped Mott insulators are insulators: hole localization in the cuprates

We demonstrate that a Mott insulator lightly doped with holes is still an insulator at low temperature even without disorder. Hole localization obtains because the chemical potential lies in a pseudogap which has a vanishing density of states at zero temperature. The energy scale for the pseudogap is set by the nearest-neighbor singlet-triplet splitting. As this energy scale vanishes if transitions, virtual or otherwise, to the upper Hubbard band are not permitted, the fundamental length scale in the pseudogap regime is the average distance between doubly occupied sites. Consequently, the pseudogap is tied to the noncommutativity of the two limits U-->infinity (U the on-site Coulomb repulsion) and L -->infinity (the system size).     

Influence of ambient oxygen pressure on the preferred orientation, microstructures, and dielectric properties of (Ba1-xSrx)TiO3 thin films with compositionally graded structures

Compositionally graded (Ba_1-xSr_x)TiO₃ (BST) thin films, with x decreasing from 0.25 to 0.0, were deposited on Pt(111)/Ti/SiO₂/Si(100) substrates by pulsed-laser ablation at 600 °C and under ambient oxygen pressures ranging from 50 to 400 mTorr. The influence of the ambient gas pressure on the preferred orientation, microstructures, and dielectric properties of compositionally graded BST films was investigated by X-ray diffraction, scanning electron microscopy, and dielectric frequency spectra, respectively. As the ambient oxygen pressure was increased, the preferred orientation evolved in the order: (100)+(110)(110)+(111) random orientation, and the surface roughness of the graded BST films also increased. The graded BST films deposited at high ambient oxygen pressures (300400 mTorr) exhibited a grainy structure with polycrystalline grains throughout the film thickness, whereas the graded films deposited at low ambient oxygen pressures (50200 mTorr) possessed a columnar structure. The evolution of the microstructure was ascribed to the different physical and chemical properties of the species that were incident onto the substrates at the various oxygen pressures. The dielectric properties of the graded BST films were dependent upon the ambient oxygen pressures. The graded BST films deposited at 200 mTorr exhibited the highest dielectric constant. PACS 77.55.+f; 77.22.Ch; 81.15.Fg     

Thermal expansion of ultradrawn polystyrene

Measurements on the linear thermal expansivities α∥ and α⊥ parallel and perpendicular to the extrusion direction, respectively, have been carried out between ?160 and 30°C for atactic polystyrene (aPS) with extrusion ratio 1 ≤λ≤ 15 and isotactic polystyrene (iPS) with 1 ≤λ≤ 7.5. For both aPS and iPS, α∥ decreases sharply with increasing λ whereas α⊥ shows only a slight increase. Below λ = 5 the anisotropy α⊥/α∥ is nearly the same for both, but α⊥/α∥ for iPS becomes much larger at higher λ. This is accompanied by an abrupt rise in crystallinity and probably results from the increase in the number and tautness of intercrystalline tie molecules. The birefringences of aPS and iPS increase with λ and have nearly the same values for λ < 5. At higher λ, however, there is a sharp rise in the birefringence of iPS which is probably associated with the sudden increase in crystallinity. With an aggregate model, the chain orientation function for aPS calculated from thermal expansivity is found to be in reasonable agreement with the corresponding value obtained from birefringence.     

Single and multicomponent equilibrium studies for the adsorption of acidic dyes on carbon from effluents

The ability of activated carbon to adsorb three acidic dyes, namely, Acid Blue 80 (AB80), Acid Red 114 (AR114), and Acid Yellow (AY117), from wastewater has been studied at 20 degrees C. The three single-component systems and the three binary equilibrium systems have been measured experimentally. The three single-component isotherms were analyzed using the Langmuir, Freundlich, Redlich-Peterson, and Sips equations. The Redlich-Peterson equation gave the lowest errors using the sum of the squares of the errors closely followed by the Sips and Langmuir equations; the Freundlich fits were significantly worse. The three bisolute experimental equilibrium sets of data were analyzed by incorporating the previous four single-component isotherm equations into the ideal adsorbed solution theory (IAST). The solution methods for each of the four isotherm equations are presented in the paper, and the predicted results for the three bisolute systems, using the four isotherm equations, are compared. For the three bisolute systems (AB80 + AR114, AB80 + AY117, and AR114 + AY117), the Redlich-Peterson isotherm gives the best correlation with the experimental isotherm data.