0.90(Bi1/2Na1/2)TiO3–0.05(Bi1/2K1/2)TiO3– 0.05BaTiO3 transducer for ultrasonic wirebonding applications

Lead-free piezoelectric ceramic 0.90(Bi_1/2Na_1/2)TiO₃–0.05(Bi_1/2K_1/2)TiO₃–0.05BaTiO₃ (BNKBT-5) rings (OD=12.7 mm, ID=5.1 mm and 2.3-mm thick) were fabricated and characterized. Four ceramic rings were used as the driving element in an ultrasonic wirebonding transducer and the performance of the transducer was characterized. The lead-free transducer was found to have comparable voltage rise and fall times as a lead-based PZT transducer and has a relatively large vibration amplitude, thus showing that BNKBT-5 has the potential to be used in fabricating lead-free ultrasonic wirebonding transducers. PACS 77.22.Ej; 77.84.-s; 85.50.-n     

Maximal line subbundles of stable bundles of rank 2 over an algebraic curve

Let E be a vector bundle of rank 2 over an algebraic curve X of genus g ≥ 2. In this paper, we prove that E is determined by its maximal line subbundles if it is general. By restudying the results of Lange and Narasimhan which relates the maximal line subbundles with the secant varieties of X, we observe that the proof can be reduced to proving some cohomological conditions satisfied by the maximal line subbundles. By noting the similarity between these conditions and the notion of very stable bundles, we get the result for the case when E has Segre invariant s(E) = g. Also by using the elementary transformation, we have the result for the case s(E) = g−1. I. Choe and J. Choy were supported by KOSEF (R01-2003-000-11634-0) and S. Park was supported by Korea Research Foundation Grant funded by Korea Government(MOEHRD, Basic Research Promotion Fund) (KRF-2005-070-C00005)     

Nature‐Inspired Bacterial Cellulose/Methylglyoxal (BC/MGO) Nanocomposite for Broad‐Spectrum Antimicrobial Wound Dressing

Bacterial cellulose (BC) is a natural material produced by Acetobacter xylinum, widely used in wound dressings due to the high water‐holding capacity and great mechanical strength. In this paper, a novel antimicrobial dressing made from BC/methylglyoxal (MGO) composite with a dip‐coating method inspired by naturally antimicrobial Manuka honey is proposed, which to our best knowledge, has not yet to be reported. Characterizations by scanning electron microscope and atomic force microscopy show the interconnected nanostructure of BC and MGO and increase surface roughness of the BC/MGO composite. Thermal analysis indicates high temperature stability of both BC and BC/MGO, while compared with BC, BC/MGO exhibits slightly weaker thermal stability possibly due to reduction of hydrogen bonding and increase of crystallinity. Mechanical test confirms the strong mechanical property of BC and BC/MGO nanocomposite. From the disk diffusion antimicrobial test, the BC/MGO nanocomposite with highest MGO concentration (4%) shows great zone inhibition diameter (around 14.3, 12.3, 17.1, and 15.5 mm against Micrococcus luteus, Pseudomonas aeruginosa, Staphylococcus aureus, and Escherichia coli). Compared with other antimicrobial wound dressing composite materials, the proposed BC/MGO nanocomposite has among the greatest antimicrobial property against broad‐spectrum bacteria, making it a promising antimicrobial dressing in chronic wounds care.     

A Radical Process towards the Development of Transition‐Metal‐Free Aromatic Carbon?Carbon Bond‐Forming Reactions

Transition‐metal‐free cross‐coupling reactions have been a hot topic in recent years. With the aid of a radical initiator, a number of unactivated arene C? H bonds can be directly arylated/functionalized by using aryl halides through homolytic aromatic substitution. Commercially available or specially designed promoters (e.g. diamines, diols, and amino alcohols) have been used to make this synthetically attractive method viable. This protocol offers an inexpensive, yet efficient route to aromatic C? C bond formations since transition metal catalysts and impurities can be avoided by using this reaction system. In this article, we focus on the significance of the reaction conditions (e.g. bases and promoters), which allow this type of reaction to proceed smoothly. Substrate scope limitations and challenges, as well as mechanistic discussion are also included.     

Investigation of domain behaviour in 0.7Pb(Mg1/3Nb2/3) O3-0.3PbTiO3 single crystals at different temperatures in the transmission electron microscope

Using transmission electron microscopy, in-situ changes in ferroelastic domains in 0.7Pb(Mg_1/3Nb_2/3)O₃-0.3PbTiO₃ single crystals were observed at 60 to -163°C. At -163°C, the microscopic tweed morphology of the ferroelastic domains rotated by 90°, and certain orientation changes in the mesoscopic sawtooth domains took place. At this temperature, the ferroelastic domains became coarsened and certain S-shaped mesoscopic domains were reshaped. The disappearance and/or changes in the orientations of both the sawtooth and the ferroelastic domains were reversible upon return to room temperature. On heating to 60°C, both the mesoscopic sawtooth and the microscopic tweed domains were stable below 53°C. Above 53°C, the mesoscopic walls disappeared and the contrast of the tweed domains became blurred. Upon return to room temperature from 60°C, the mesoscopic domain patterns could not be retrieved, indicating that the transformation was irreversible. The morphology of the tweeds at this temperature indicated a structural transition from a two-variant domain state to a multivariant state, eliminating mesoscopic boundaries.     

Tensile strength of aluminium nitride films

Two-layered aluminium nitride (AlN)/silicon nitride microbridges were fabricated for microbridge tests to evaluate the elastic modulus, residual stress and tensile strength of the AlN films. The silicon nitride layer was added to increase the robustness of the structure. In a microbridge test, load was applied to the centre of a microbridge and was gradually increased by a nano-indenter equipped with a wedge tip until the sample was broken, while displacement was recorded coherently. Measurements were performed on single-layered silicon nitride microbridges and two-layered AlN/silicon nitride microbridges respectively. The data were fitted to a theory to derive the elastic modulus, residual stress and tensile strength of the silicon nitride films and AlN films. For the AlN films, the three parameters were determined to be 200, 0.06 and 0.3?GPa, respectively. The values of elastic modulus obtained were consistent with those measured by conventional nano-indentation method. The tensile strength value can be used as a reference to reflect the maximum tolerable tensile stress of AlN films when they are used in micro-electromechanical devices.     

Multiple drumlike silencer for low frequency duct noise reflection

Low frequency duct noise is difficult to tackle by passive means within a certain space limitation. Drumlike silencer offers broadband sound reflection in the low-frequency region, e.g. 0.1–0.3 times the first cut-on frequency of the central duct. Optimization was carried out for the logarithmic bandwidth in which the transmission loss (TL) is greater than a pre-determined criterion value. The prediction was validated in laboratory but it was anticipated that the required high level of tension is difficult to implement in practice. It is found that the optimal tension is approximately proportional to the 3rd power of membrane length, so a partitioned membrane is expected to reduce the required tension. In order to optimize the partitioned drumlike silencer, a new cost function of total transmission loss, or insertion loss, with a frequency weighting in favour of a certain wide band of low frequencies is introduced. The new cost function removes the undesirable discontinuous behaviour occurring in the previous optimization process. It is also found that the partitioned silencer can drastically improve the weighted total TL and the tension required is indeed much reduced. The main performance improvement derives from around the lower frequency limit of interest.     

Thermally stimulated depolarization current in electron‐irradiated poly(vinylidene fluoride‐trifluoroethylene) (56/44 mol %) copolymers

The effect of electron irradiation on poly(vinylidene fluoride‐trifluoroethylene) (56/44 mol %) copolymers was studied with dielectric constant measurements, differential scanning calorimetry (DSC), X‐ray diffraction, thermally stimulated depolarization current (TSDC) spectroscopy, and polarization hysteresis loops. The dielectric relaxation peaks, obeying the Vogel–Fulcher law, indicated that the copolymers were transformed from a normal ferroelectric to a relaxor ferroelectric. The X‐ray and DSC results showed that both the crystalline and polar ordering decreased after irradiation, indicating a partial recovery from trans–gauche bonds to local trans bonds (polar ordering). Moreover, the peak temperature decreased with the irradiation dose in the TSDC spectra; this demonstrated fewer dipoles and crystalline regions in the irradiated copolymer films during the ferroelectric–paraelectric transition and was consistent with polarization hysteresis loop measurements. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1099–1105, 2004     

High-efficiency difference frequency generation in LiNbO3

We report efficient (50%) difference frequency generation of infrared radiation in LiNbO₃. The quantum conversion efficiency shows good qualitative agreement with the exact coupled wave solution. Analysis of this solution shows that the ratio of pump to idler power should be large for optimum output power. This result is a distinct departure from the small signal analysis. Our results indicate that total conversion to the infrared is possible in commercially available crystal lengths.