Holographic image subtraction using a polarization technique

A holographic image subtraction technique is proposed. The vector nature of light is utilized in introducing a phase difference of π between the two reconstructed object waves. The experimental results are also presented.     

Particle multiplicities in the fission-like reactions of 340 MeV Si on Th

Pre-scission and post-scission multiplicities of neutrons and alpha particles have been simultaneously measured for the fission-like reactions of 340 MeV ²⁸Si on ²³²Th. Dynamical model calculations using HICOL code predict that about 90% of the observed events are of quasi-fission type while the remaining 10% are from compound nucleus fission decay. Moving source fits were carried out to the observed neutron and alpha particle spectra, measured at different angles with respect to the fragment directions. The pre-scission and post-scission neutron multiplicities are deduced to be 8.7±2.0 and 9.4±2.0, respectively. The corresponding multiplicity values for alpha particles are found to be 0.22±0.08 and 0.1±0.03. From the measured post-scission neutron multiplicity, it is inferred that about 65±20 MeV of the initial excitation energy remains at scission. This may be compared to the value of 85±30 MeV estimated from PACE2 statistical model calculations, adjusted to reproduce the measured pre-scission neutron multiplicity. From a comparison of the Statistical Model predictions with the measured pre-scission neutron multiplicity, the fission delay is estimated to be of 5⁺⁷₋₃×10⁻²⁰ s which overlaps with the average duration of fission-like process from the contact to the scission point (2×10⁻²⁰ s) as determined from HICOL-based dynamical calculations. For the delay time deduced as above, the pre-scission alpha particle multiplicity calculated by the PACE2 code is about a factor two larger than the experimental one, demonstrating the difficulties in modelling the alpha particle emission from highly elongated shapes that characterize the fissioning system from the contact point to scission.     

Fluctuation study of pionisation in ultrarelativistic nucleus-nucleus interaction

The scaled factorial moments and the multifractal moments have been investigated in differentη-intervals to study the dynamical fluctuation of pions produced in 200 AGeV³²S-Ag/Br interaction. In order to investigate the detail characteristics of intermittency behaviour, theF-moments are extracted up to the eighth order of moments in differentM-intervals. The analysis indicates a non-thermal phase transition and different regime of particle production during the hadronisation process.     

Non-isothermal thermogravimetric pyrolysis kinetics of waste petroleum refinery sludge by isoconversional approach

Pyrolysis of petroleum refinery sludge has received global acclamation as a clean conversion technique for providing solution of sludge disposal as well as efficient resource utilization. This communication reports the kinetics study of pyrolysis of petroleum refinery sludge. Experiments were carried out by means of thermogravimetric analysis at different heating rates of 5, 10 and 20°C min⁻¹. The pyrolytic reaction is significant in the temperature range of 200–350°C and analysis and evaluation of kinetic parameters is done in the 100–500°C region of non-isothermal TG curves obtained in nitrogen atmosphere. The activation energy is calculated by iso-conversional method, then other kinetic parameters are determined by considering single reaction and two reaction global kinetic model. Two-reaction model is found to fit satisfactorily the experimental results.     

Polyelectrolyte behavior and macromolecular properties of sodium amylopectin xanthate in dilute solution

Sodium amylopectin xanthate was prepared by xanthation of potato amylopectin in alkaline medium. The pure product was characterized by I₂ solution and ultraviolet spectra of the xanthate groups. The polyelectrolyte behavior of Na amylopectin xanthate in aqueous and salt solutions was investigated by viscometry and light scattering. Its polyelectrolyte behavior in aqueous solution as studied viscometrically was completely different from that of Na amylose xanthate, which is characteristic of linear polyelectrolyte molecules. This difference in behavior could be partly due to the branched structure of amylopectin molecule. A dissymmetry study of Na amylopectin xanthate in aqueous and salt solutions, however, showed that Na amylopectin xanthate molecule underwent expansion in water by about 1.3 times its linear dimension in 0.5M NaCl (unperturbed value). Light-scattering measurements confirmed that the Na amylopectin xanthate molecule had a polydisperse random-coil chain configuration in 0.25M NaCl. Its molecular weight, end-to-end length, and other parameters in salt and alkali solutions were also determined, and the data were then compared with those of Na amylose xanthate in the same media. The solution behavior of Na amylopectin xanthate in 1M NaOH was further investigated and linear expansion factor α, excluded volume factor A₂M _W/[η], and Flory's hydrodynamic constant φ were evaluated.     

Determination of ammonia, ethanol and acetic acid in solution using membrane introduction mass spectrometry

Methods have been developed to allow applications of membrane introduction mass spectrometry (MIMS) to monitor solution phase components of fermentation broths using electron ionization. The solutions are transported by flow injection analysis (FIA) through a direct insertion membrane probe, fitted with a silicone membrane in the sheet configuration. Analytes of interest pass through the membrane and are ionized by electron implant ionization. The compounds monitored are ammonia, acetic acid, and ethanol, with ammonia being detected as the monochloramine derivative which is generated at pH 10 upon addition of hypochlorite. Quantitation is achieved using external standard solutions. The dynamic range for the quantification of ammonia is 2-8000 ppm, and for ethanol and acetic acid 10-1000 ppm. This method provides rapid detection of analytes of interest, on-line monitoring capabilities, and the advantage of electron ionization. The introduction of samples into the mass spectrometer is achieved readily and automatically, the response time is a few seconds, and there are no memory effects.     

Physicochemical and macromolecular properties of sodium amylose xanthate in dilute solution

Sodium amylose xanthate has been studied in dilute solution. Potato starch was fractionated for this purpose into amylose and amylopectin fractions. Amylose was xanthated in solution under alkaline conditions and the Na amylose xanthate was then characterized by reaction with I₂ solution and ultraviolet spectra of the xanthate groups determined. Stability of the xanthate in alkaline condition under both oxygen and nitrogen atmospheres was also investigated. From light scattering measurements of dilute salt solutions of Na amylose xanthate, the weight-average molecular weight M _w as well as the molecular dimensions were determined. In 0.11M NaCl, which conforms to the θ solvent, Na amylose xanthate molecules appear to have a random-coil configuration. Two other configurational parameters, such as the effective bond length b, and the steric factor σ, i.e., (R₀²)^1/2/(R_f² )^1/2, where (R₀²)^1/2 is the Root-mean-square end-to-end distance in the unperturbed state and (R_f² )^1/2 is the unperturbed value calculated on the assumption of free rotation about each intermonomer C? O bond of the amylose chain were also calculated and found to be 6.24 and 1.020, respectively. It is thus concluded that the amylose chain in Na amylose xanthate behaves as a typical flexible coil in dilute salt solution.     

NS and NSO-Donor ligands and their metal complexes. Synthesis and characterisation of a new low-spin iron(III) complex with 1,2-di(o-aminophenylthio)ethane and iron(III), cobalt(III) and manganese(III) complexes of 1,2-di(o-salicylaldiminophenylthio)ethane

Summary Iron(III) complexes of a quadridentate N₂S₂ donor ligand, 1,2-di(o-aminophenylthio)ethane (DAPTE) and its Schiff Base with salicylaldehyde, a hexadentate N₂S₂O₂ donor ligand,viz. 1,2-di(o-salicylaldiminophenylthio)ethane (H₂DSALPTE) have been synthesised and characterised.The Schiff base ligand (1 mol) gave a dark green tri-iron(III) [Fe₃(DSALPTE)(HDSALPTE)Cl₃]Cl₂ complex when reacted with anhydrous iron(III) chloride (1 mol). The Mössbauer data of this complex suggest the presence of three iron sites, one of which is octahedral and the other two tetrahedral. On the other hand, Fe(ClO₄)₃ reacted smoothly with H₂DSALPTE in ethanol to give a mononuclear pseudo-octahedral complex in which the ligand functions in a dibasic hexadentate fashion. Mössbauer data suggest the presence of a low-spin-high-spin equilibrium in the solid state. The manganese(III) and cobalt(III) complexes of the Schiff base, H₂DSALPTE, are also studied for the sake of comparison with the corresponding iron(III) complex. The N₂S₂ ligand, however, formed a low-spin pseudo-octahedral iron(III) complex. The complexes have been characterised by elemental analysis, molar conductance values, cryomagnetic data and i.r., electronic and Mössbauer spectral data.