Chemical Speciation of Amphoteric Ions on Semi‐Dry Scrubber Residue and Bag‐House Ash from MSWI

Two series of size‐fractionated combusted residues, a bag‐house ash and a scrubber residue, from a municipal solid waste incinerator (MSWI) were prepared and extracted by means of sequential chemical extraction (SCE) procedures proposed by Tessier. Concentrations of water‐soluble phase, exchangeable phase, carbonated phase, Fe/Mn oxide phase, organic matter phase, and residual phase bound amphoteric metals (Pb and Zn) were obtained, and have been compared with those of single batch extraction of toxic characteristic leaching procedure (TCLP). In each size fraction of baghouse ash or scrubber residue, lead or zinc shows a common phenomena that the TCLP value is always lower than the content of the water‐soluble fraction. For lead, baghouse ash has a significant size‐dependent distribution on the water‐soluble phase to perform a size‐dependent test of lead in the TCLP test. The zinc TCLP data having less size dependence might be due to that neither the baghouse ash nor the scrubber residue has a size‐dependent distribution on the water‐soluble zinc phase.     

Sorption interactions of volatile organic compounds with organoclays under different humidities by using linear solvation energy relationships

Organoclays are usually used as sorbents to reduce the spread of organic compounds and to remove them at contaminated sites. The sorption equilibrium and the mechanisms of volatile organic compounds (VOCs) on organoclays under different humidities are helpful for developing efficient organoclays and for predicting the fate of VOCs in the environment. In this study, the organoclay was synthesized through exchanging inorganic cations by hexadecyltrimethyl ammonium (HDTMA) into montmorillonite, resulting in 12?% of organic content. The surface area of organoclay was smaller than the unmodified clay due to the incorporation of organic cations into the interlayer. Both adsorption on organoclay surface and partition into the incorporated HDTMA in organoclay played roles on the sorption process. Compared the sorption coefficients in montmorillonite and different modified clays, the incorporated organic cations overcame the inhibition effect of hydrophilic surface of clay on the sorption process of hydrophobic organic compounds from water. The sorption coefficients of VOC vapors on organoclay were further characterized using a linear solvation energy relationship (LSER). The fitted LSER equations were obtained by a multiple regression of the sorption coefficients of 22 probe chemicals against their solvation parameters. The coefficients of the five-parameter LSER equations showed that high HDTMA-content montmorillonite interacts with VOC molecules mainly through dispersion, partly through dipolarity/polarizability and hydrogen-bonds as well as with negative π-/n-electron pair interaction. The interaction analysis by LSERs suggests that the potential predominant factors governing the sorption of VOCs are dispersion interactions under all tested humidity conditions, similar with the lower level modified clay. The derived LSER equations successfully fit the sorption coefficients of VOCs on organoclay under different humidity conditions. It is helpful to design better toxic vapor removal strategy and evaluate the fate of organic contaminants in the environment.     

A Theoretical Investigation of the Decomposition Reactions of Ethyl Formate in the S0 State

This study revisits the stability of the possible conformations and the decomposition reactions of ethyl formate in the S₀ state using the (U)MP2, MP4SDTQ, CCSD(T), and (U)B3LYP methods with various basis sets. The transition states of the decomposition channels to HCOOH + C₂H₄, CO + CH₃CH₂OH, CH₂O + CH₃CHO, HCOH + CH₃CHO, C₂H₆ + CO₂, and H₂ + CH₂CHOCHO are determined. The microcanonical rate constants derived from the RRKM theory are calculated for each of the decomposition reactions. The high‐pressure limit rate constants are calculated for the decomposition channels to HCOOH + C₂H₄, CO + CH₃CH₂OH, and CH₂O + CH₃CHO.     

White light electroluminescence from graphene‐enhanced single polymer comprising two color emitters of equal molar ratios

White polymeric light‐emitting diode (WPLED) based on a single polymer, poly(3‐hexylthiophene‐alt‐9,9‐dioctylfluorene) (PTAF), has been successfully demonstrated. This conjugated alternating copolymer, PTAF, comprises 50 mol % of 3‐hexylthiophene which is an orange‐red color chromophore and 50 mol % 9,9‐dioctylfluorene which is a bluish‐green color chromophore. It was synthesized by Suzuki cross‐coupling reaction and has a molecular weight of 15,021 and polydispersity of 1.36. Nanocomposite consisting PTAF and graphene nanosheets enhances the optoelectronic properties and the device fabricated with a configuration of ITO/PEDOT:PSS/(PTAF + 1% graphene)/Ca/Al shows two‐color white electroluminescence with CIE 1931 coordinates of (0.28, 0.34). The white luminescence from a single polymer affords the WPLED device a simple structure and low fabrication cost. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Flavonoid Aglycones and Indole Alkaloids from the Roots of Acacia Confusa

From the methanolic extract of the roots of Acacia confusa Merr. (Leguminosae), (‐)‐2,3‐cis‐3,4‐cis‐4′‐methoxy‐3,3′,4,7,8‐pentahydroxyflavan ( 1 ), (‐)‐2,3‐cis‐3,4‐cis‐3,3′,4,4′,7,8‐hexahydroxyflavan ( 2 ), (‐)‐2,3‐trans‐3′,4′,7,8‐tetrahydroxydihydroflavonol ( 3 ), (+)‐catechin ( 4 ), (‐)‐epicatechin ( 5 ), 3′,4′,7,8‐tetrahydroxyflavonol ( 6 ) together with N‐methyltryptamine ( 7 ) and N,N‐dimethyltryptamine ( 8 ) were isolated, and their structures were established by analysis of their spectroscopic data. Among them, compound 1 was a new flavonoid. Additionally, the results of chromatographic bioassay on lettuce seeds indicated that compounds 7 and 8 exhibited significant phytotoxicity at a concentration lower than 14 mM.     

Phenylated poly(P-phenylene vinylenes) prepared via the chlorine precursor route (CPR)

The synthesis of several highly phenylated PPV derivatives by a chlorine precursor route (CPR) was investigated in order to understand its scope. Three 1,4-bis(chloromethyl)benzene monomers were prepared via a robust and versatile synthetic procedure involving the Diels-Alder reaction. The monomers were then polymerized to the corresponding precursor polymers with about 1.0 equivalent of potassium t-butoxide in THF. Only one monomer gave a soluble precursor polymer while the other two gave insoluble precursor polymers. The soluble precursor polymer was deposited as thin films and then converted to the corresponding PPV derivative, which showed green photoluminesence and electroluminesence.     

Immobilization of a Monolayer of Bovine Serum Albumin on Gold Nanoparticles for Stereo‐specified Recognition of Dansyl‐norvaline

The assembly strategy to prepare a monolayer of bovine serum albumin on the surface of silica gel supported gold nanoparticles is described. The stereo‐specific recognition ability of this material was evaluated by enantioresolution of Dansyl‐norvaline. For enantiomeric separation, the influences of buffer concentration and the concentration of organic modifier on the separation performance were investigated. A better separation in terms of enantioresolution and peak shape was found with the phosphate concentration at 30 mM. Moreover, the peak shape and resolution can be improved by the addition of methanol solution. Enantioresolution of Dansyl‐norvaline was obtained from this material at optimized conditions. It appears that the immobilization of a monolayer of bovine serum albumin on gold nanoparticles as the chiral selector of Dansyl‐derivative amino acid is promising.     

Dinuclear iron(II)-cyanocarbonyl complexes linked by two/three bridging ethylthiolates: relevance to the active site of [Fe] hydrogenases

Dinuclear iron(II)-cyanocarbonyl complex [PPN](2)[Fe(CN)(2)(CO)(2)(mu-SEt)](2) (1) was prepared by the reaction of [PPN][FeBr(CN)(2)(CO)(3)] and [Na][SEt] in THF at ambient temperature. Reaction of complex 1 with [PPN][SEt] produced the triply thiolate-bridged dinuclear Fe(II) complex [PPN][(CN)(CO)(2)Fe(mu-SEt)(3)Fe(CO)(2)(CN)] (2) with the torsion angle of two CN(-) groups (C(5)N(2) and C(3)N(1)) being 126.9 degrees. The extrusion of two sigma-donor CN(-) ligands from Fe(II)Fe(II) centers of complex 1 as a result of the reaction of complex 1 and [PPN][SEt] reflects the electron-rich character of the dinuclear iron(II) when ligated by the third bridging ethylthiolate. The Fe-S distances (2.338(2) and 2.320(3) A for complexes 1 and 2, respectively) do not change significantly, but the Fe(II)-Fe(II) distance contracts from 3.505 A in complex 1 to 3.073 A in complex 2. The considerably longer Fe(II)-Fe(II) distance of 3.073 A in complex 2, compared to the reported Fe-Fe distances of 2.6/2.62 A in DdHase and CpHase, was attributed to the presence of the third bridging ethylthiolate, instead of pi-accepting CO-bridged ligand as observed in [Fe] hydrogenases. Additionally, in a compound of unusual composition ([Na.(5)/(2)H(2)O][(CN)(CO)(2)Fe(mu-SEt)(3)Fe(CO)(2)(CN)])(n)((1)/(2)O(Et)(2))(n) (3), the Na(+) cations and H(2)O molecules combining with dinuclear [(CN)(CO)(2)Fe(mu-SEt)(3)Fe(CO)(2)(CN)](-) anions create a polymeric framework wherein two CN(-) ligands are coordinated via CN(-)-Na(+)/CN(-)-(Na(+))(2) linkages, respectively.