Design of Sensitive Biocompatible Quantum‐Dots Embedded in Mesoporous Silica Microspheres for the Quantitative Immunoassay of Human Immunodeficiency Virus‐1 Antibodies

A novel sandwich‐type electrochemiluminescence (ECL) immunosensor was developed to enable the sensitive detection of HIV‐1 antibodies. This system incorporated mesoporous silica (mSiO₂) complexed with quantum dots (QDs) and nano‐gold particles, which were assembled to enhance signal detection. Magnetic beads were used by immobilizing the secondary anti‐IgG antibody. This was first employed to capture HIV‐1 antibody (Ab) to form a Fe₃O₄/anti‐IgG/Ab complex. A high loading and signal‐enhanced nanocomposite (hereafter referred to as Au‐mSiO₂‐CdTe) was used as a HIV‐1 antigen label. The Au‐mSiO₂‐CdTe nanocomposite was conjugated with the Fe₃O₄/anti‐IgG/Ab complex to form an immunocomplex (hereafter referred to as Fe₃O₄/anti‐IgG/Ab/HIV‐1/CdTe‐mSiO₂‐Au). This complex could be further separated by an external magnetic field to produce ECL signals. Due to the large specific surface area and pore volume of mSiO₂, the loading of the CdTe QDs was markedly increased. Thus, the loaded QDs released a powerful chemiluminescent signal with a concordantly increased sensitivity of the immunosensor. The immunosensor was highly sensitive, and displayed a linear range of responses for HIV‐1 antibody across a dilution range of 1 : 1500 through 1 : 50 with the detection limit of 1 : 4500. The immunoassay can be a promising candidate in early diagnosis of HIV infection.     

A one-pot tandem synthesis of various 1,2-disubstituted benzimidazoles

A facile method to synthesize various 1,2-disubstituted benzimidazoles is developed. It is suggested that formation of a Meisenheimer adduct between the substrate, amine, and solvent aids the N-arylation process. The generality of the protocol is demonstrated by the efficient reactions involving numerous substituents ranging from electron-withdrawing groups to electron-donating groups.     

ZIF-67 derived carbon wrapped discontinuous CoxP nanotube as anode material in high-performance Li-ion battery

Transition metal phosphides (TMPs) are prospective anode materials for lithium-ion batteries (LIBs) due to their high theoretical capacities and low redox voltages. Herein, we report a template directing method to develop a tube-sheath hybrid composing of cobalt phosphide particles encapsulated in metal organic frameworks (MOFs) derived N-doped carbon sheaths (Co_xP@NC). The utilization of directing template leads to a homogenous distribution of the subsequently formed cobalt phosphide particles, restrains the aggregation of cobalt phosphides, and thus results in the superb rate capability and cyclability. Contributable to the integrated merits of the interior downsized cobalt phosphide particles and the outer ZIF-67 derived porous carbon sheath, the volume expansion during cycling is effectively suppressed. The Co_xP@NC hybrid shows superb electrochemical performance as anode material for LIB, with good reversible capacity of 928 mAh·g^?1 after 100 cycles at 0.1 A g^?1, and high stability of 526 mAh·g^?1 after 600 cycles at 1.0 A g^?1. This work provides a route for rational design of MOF derived carbon-based anode material for LIB, which could also be applied as a promising platform in diverse field.     

Self-Compacting Alkali-Activated Materials: Progress and Perspectives

Alkali-activated materials (AAMs) are considered to be alternative cementitious materials for civil infrastructures. Nowadays, efforts have been made in developing AAMs with self-compacting ability. The obtained self-compacting AAMs (SCAAMs) accomplish superior passing and filling properties as well as excellent mechanical and environmental advantages. This work critically revisits recent progresses in SCAAMs including mixture proportions, fresh properties, mechanical strength, microstructure, acid and sulfate resistance, high temperature behaviors, impact resistance and interface shear strength. To facilitate direct comparison and interpretation of data from different publications, mixture proportions were normalized in terms of the content of key reactive components from precursors and activators, and correlation with mechanical behaviors was made. Moreover, special attention was paid to current research challenges and perspectives to promote further investigation and field application of SCAAMs as advanced construction material.     

Sampled-data output voltage regulation for a DC–DC buck converter nonlinear system with actuator and sensor failures

Nonlinear Dynamics - This paper considers the distributed adaptive neural consensus tracking control problem for a class of uncertain nonaffine nonlinear multi-agent systems. By making use of the...     

偶氮四唑叠氮基甲脒AFZT高压物性的第一性原理计算

偶氮四唑叠氮基甲脒AFZT的爆轰性能表现优异,在高能炸药领域中具有广阔的应用前景.本文采用基于密度泛函理论的第一性原理方法计算了AFZT在0～50 GPa压力下的晶体结构、电子性质以及氢键相互作用,并分析了这些性质在压力下的变化规律.在压力的作用下,AFZT晶体在5 GPa下发生了结构转变并伴随着电子结构中带隙值的突变,其带隙先减小后增大再减小,总态密度的峰值随着压力的增加而减小.结构中叠氮甲脒阳离子上的N8-N9与N9-N10键在压力下表现得最稳定,N-H^…N类型的氢键在所有相互作用中占据主导地位.此外,AFZT结构沿不同晶轴压缩的难易程度与此方向上氢键相互作用分布的疏密有关,并且其氢键主要沿xz平面分布而在y轴上分布极少,这导致了它沿y轴方向最易被压缩.     

Resolution enhancement using a new multiple-pulse decoupling sequence for quadrupolar nuclei

A new decoupling composite pulse sequence is proposed to remove the broadening on spin S=1/2 magic-angle spinning (MAS) spectra arising from the scalar coupling with a quadrupolar nucleus I. It is illustrated on the (31)P spectrum of an aluminophosphate, AlPO(4)-14, which is broadened by the presence of (27)Al/(31)P scalar couplings. The multiple-pulse (MP) sequence has the advantage over the continuous wave (CW) irradiation to efficiently annul the scalar dephasing without reintroducing the dipolar interaction. The MP decoupling sequence is first described in a rotor-synchronised version (RS-MP) where one parameter only needs to be adjusted. It clearly avoids the dipolar recoupling in order to achieve a better resolution than using the CW sequence. In a second improved version, the MP sequence is experimentally studied in the vicinity of the perfect rotor-synchronised conditions. The linewidth at half maximum (FWHM) of 65 Hz using (27)Al CW decoupling decreases to 48 Hz with RS-MP decoupling and to 30 Hz with rotor-asynchronised MP (RA-MP) decoupling. The main phenomena are explained using both experimental results and numerical simulations.     

High-field NMR using resistive and hybrid magnets

Resistive and resistive-superconducting hybrid magnets can generate dc magnetic fields much higher than conventional superconducting NMR magnets but the field spatial homogeneity and temporal stability are usually not sufficient for high-resolution NMR experiments. Hardware and technique development addressing these issues are presented for high-resolution NMR at magnetic fields up to 40T. Passive ferromagnetic shimming and magic-angle spinning are used effectively to reduce the broadening from inhomogeneous magnetic field. A phase correction technique based on simultaneous heteronuclear detection is developed to compensate magnetic field fluctuations to achieve high spectral resolution.     

The first pulsar discovered by FAST

<正>To assist with the commissioning [1] of the Five-hundredmeter Aperture Spherical radio Telescope (FAST), we performed a pulsar search, with the primary goal of developing and testing the pulsar data acquisition and processing pipelines. We tested and used three pipelines, two (P1 and P2 hereafter) searched for the periodic signature of pulsars     

Temperature Dependence of In-plane Resistivity and Inverse Hall Angle in NLED Holographic Model

In the strange metal phase of the high-Tc cuprates, it is challenging to explain the linear temperature dependence of the in-plane resistivity and the quadratic temperature dependence of the inverse Hall angle. In this paper, we investigate the temperature dependence of the in-plane resistivity and inverse Hall angle in the nonlinear electrodynamics holographic model developed in our recent work. Maxwell electrodynamics and Born-Infeld electrodynamics are considered. Both cases support a wide spectrum of temperature scalings in parameter space. For Maxwell electrodynamics, the T-linear in-plane resistivity generally dominates at low temperatures and survives into higher temperatures in a narrow strip-like manner. Meanwhile, the T-quadratic inverse Hall angle dominates at high temperatures and extends down to lower temperatures. The overlap between the T-linear in-plane resistivity and the T-quadratic inverse Hall angle, if occurs, would generally present in the intermediate temperate regime. The Born-Infeld case with a 0 is quite similar to the Maxwell case. For the Born-Infeld case with a 0, there can be a constraint on the charge density and magnetic field. Moreover, the overlap can occur for strong charge density.