Tetrahedral atom ordering in a zeolite framework: a key factor affecting its physicochemical properties

Three gallosilicate natrolites with closely similar chemical composition but differing in the distribution of Si and Ga over crystallographically different tetrahedral sites (T-sites) show striking differences in their cation exchange performance. The ability to exchange Na(+) by the larger alkali metal cations decreases upon increasing the size of the cation, as expected, but also with the degree of T-atom ordering. To seek an insight into this phenomenon, the crystal structures of 11 different zeolites, which show variations in degree of T-atom ordering, nature of countercation, and hydration state, have been refined using synchrotron diffraction data. While the three as-made sodium materials were characterized to have a low, medium, and high degree of ordering, respectively, their pore sizes are close to the size of the bare Na(+) cation and much smaller than that of the larger alkali cations, which are nonetheless exchanged into the materials, each one at a different level. Interestingly, large differences are also manifested when the Na(+) back-exchange is performed on the dehydrated K(+) forms, with crystallographic pore sizes too small even to allow the passage of Na(+). Although the thermodynamic data point to small differences in the enthalpy of the Na(+)/K(+) exchange in the three materials, comparison of the "static" crystallographic pore sizes and the diameter of the exchanged cations lead us to conclude that during the exchange process these zeolites undergo significant deformations that dynamically open the pores, allowing cation traffic even for Cs(+) in the case of the most disordered material. In addition to the very large topological flexibility typical of the natrolite framework, we propose as a hypothesis that there is an additional flexibility mechanism that decreases the rigidity of the natrolite chain itself and is dependent on preferential siting of Si or Ga on crystallographically different T-sites.     

New Dammarane‐Type Saponins from the Rhizomes of Panax japonicus

Phytochemical investigation of the rhizomes of Panax japonicus C. A. Meyer (Araliaceae) resulted in the isolation of two new dammarane‐type triterpenoid saponins, yesanchinoside R₁ ( 1 ) and yesanchinoside R₂ ( 2 ), together with one new natural product, 6′′′‐O‐acetylginsenoside Re ( 3 ). In addition, 25 known compounds, including 23 triterpenoid saponins, 4 – 26 , β‐sitosterol 3‐O‐β‐D ‐glucopyranoside ( 27 ), and ecdysterone ( 28 ), were also identified. The known saponins 12, 15 , and 18 – 22 were reported for the first time from the title plant. Their structures were elucidated on the basis of detailed spectroscopic analyses, including 1D‐ and 2D‐NMR techniques, as well as acidic hydrolysis.     

Porous magnetic manganese oxide nanostructures: synthesis and their application in water treatment

Magnetic manganese oxide nanostructures are fabricated at room temperature by mixing a KMnO(4) solution and oleic acid capped Fe(3)O(4) particles. Oleic acid molecules capped Fe(3)O(4) particles are oxidized by potassium permanganate (KMnO(4)) in an aqueous solution to produce porous magnetic manganese oxide nanostructures. The synthesis technique can be extended to other MnO(x) structures with composition of different nanocrystals, such as quantum dots, noble metal crystals which may have important applications as catalysts, adsorbents, electrodes and advanced materials in many scientific disciplines. Transmission electron microscopy, energy-dispersive X-ray spectroscopy, scanning electron microscopy, X-ray photoelectron spectroscopy, X-ray powder diffraction, Fourier transform infrared spectroscopy, and nitrogen adsorption-desorption measurements are employed to characterize the structures. As an adsorbent in water treatment, the nanostructures possess a large adsorption capability and high organic pollutant removal rates due to the large surface area and pore volume. The nanostructures are recyclable as their adsorption capability can be recovered by combustion. Furthermore, the strong magnetism exhibited by the structures provides an easy and efficient separation means in wastewater treatment under an external magnetic field.     

Speciation analysis of arsenic compounds in edible oil by ion chromatography-inductively coupled plasma mass spectrometry

An inductively coupled plasma mass spectrometer (ICP-MS) was used as an ion chromatographic (IC) detector for the speciation analysis of arsenic in edible oil. The arsenic species studied include arsenite, arsenate, monomethylarsonic acid, dimethylarsinic acid, arsenobetaine and arsenocholine. Gradient elution using (NH(4))(2)CO(3) and methanol at pH 8.5 allowed the chromatographic separation of all species in less than 8 min. Effluents from the IC column were delivered to the nebulizer of ICP-MS for the determination of arsenic. The concentrations of arsenic species have been determined in several used and fresh vegetable oil samples. In this study, a microwave-assisted extraction method was used for the extraction of arsenic species from oil samples. The extraction efficiency was better than 92% and the recoveries from spiked samples were in the range of 90-105%. The precision between sample replicates was better than 8% for all determinations. The limits of detection were in the range of 0.008-0.024 ng mL(-1) for various arsenic species based on peak height, which corresponded to 0.08-0.24 ng g(-1) in the original oil sample. The major arsenic species in the used oil samples varied based on the food items cooked.     

Novel calcium-alginate capsules with aqueous core and thermo-responsive membrane

Novel calcium-alginate (Ca-alginate) capsules with aqueous core and thermo-responsive membrane are successfully prepared by introducing a co-extrusion minifluidic approach, and the thermo-responsive gating characteristics of Ca-alginate capsule membranes embedded with poly(N-isopropylacrylamide) (PNIPAM) microspheres are investigated systematically. The experimental results show that the prepared Ca-alginate capsules are highly monodisperse, and the average diameter and membrane thickness of Ca-alginate capsules are about 2.96 mm and 0.11 mm respectively. The Ca-alginate capsule membranes exhibit desired thermo-responsive gating property. With increasing the content of PNIPAM microspheres embedded in the Ca-alginate capsule membranes, the thermo-responsive gating coefficient of the capsule membranes increases simply. When solute molecules diffuse through the capsule membrane, the thermo-responsive gating coefficient is significantly affected by the molecular weight of solute molecules.     

TIRF microscopy as a screening method for non-specific binding on surfaces

We report a method for studying nanoparticle-biosensor surface interactions based on total internal reflection fluorescence (TIRF) microscopy. We demonstrate that this simple technique allows for high throughput screening of non-specific adsorption (NSA) of nanoparticles on surfaces of different chemical composition. Binding events between fluorescent nanoparticles and functionalized Zeonor? surfaces are observed in real-time, giving a measure of the attractive or repulsive properties of the surface and the kinetics of the interaction. Three types of coatings have been studied: one containing a polymerized aminosilane network with terminal -NH(2) groups, a second film with a high density of -COOH surface groups and the third with sterically restraining branched poly(ethylene)glycol (PEG) functionality. TIRF microscopy revealed that the NSA of nanoparticles with negative surface charge on such modified coatings decreased in the following order -NH(2)>-branched PEG>-COOH. The surface specificity of the technique also allows discrimination of the degree of NSA of the same surface at different pH.     

Location of Si vacancies and [Ti(OSi)4] and [Ti(OSi)3OH] sites in the MFI framework: a large cluster and full ab initio study

Titanium silicalite-1 (TS-1) is an important catalyst for selective oxidation reactions. However, the nature and structure of the active sites and the mechanistic details of the catalytic reactions over TS-1 have not been well-understood, leaving a continuous debate on the genesis of active sites on the TS-1 surface in the literature. In this work, the location of Si vacancies and [Ti(OSi)(4)] and [Ti(OSi)(3)OH] sites in the MFI (Framework Type Code of ZSM-5 (Zeolite Socony Mobile-Five)) framework has been studied using a full ab initio method with 40T clusters with a Si:Ti molar ratio of 39:1. It was shown that the former four energetically favorable sites for Si vacancies are T6, T12, T4, and T8 and for Ti centers of [Ti(OSi)(4)] are T10, T4, T8 and T11, being partially the same sites. Whether by replacing Si vacancies or substituting the fully coordinated Si sites, the most preferential site for Ti is T10, which indicates that the insertion mechanism does not affect the favorable sites of Ti in the MFI lattice. For the defective [Ti(OSi)(3)OH] sites, it was found that the Si vacancy at T6 with a Ti at its neighboring T9 site (T6-def-T9-Ti pair) is the most energetically favorable one, followed by a T6-def-T5-Ti pair with a small energy gap. These findings are significant to elucidate the nature of the active sites and the mechanism of reactions catalyzed by TS-1 and to design the TS-1 catalyst.     

Isolation and structural characterization of the elusive 1:1 adduct of hydrazine and carbon dioxide

A solid hydrazine was isolated as a crystalline powder by reacting aqueous hydrazine with supercritical CO(2). Its structure determined by single crystal X-ray diffraction shows a zwitterionic form of NH(3)(+)NHCO(2)(-). The solid hydrazine is remarkably stable but is as reactive as liquid hydrazine even in the absence of solvents.     

Control of ZnO morphologies on carbon nanotube electrodes and electrocatalytic characteristics toward hydrazine

We controlled the morphologies of zinc oxide (ZnO) nanostructures on single-walled carbon nanotube electrodes by an electrochemical deposition method and investigated the dependence of the electrocatalytic characteristics toward hydrazine on the different morphologies. ZnO nanorods provided high electrocatalytic activity with unique electrochemical behaviours, associated with the H(+) ion generated by the electro-oxidation of hydrazine.