Conjugate addition of (trimethylstannyl)copper reagents to α,β-acetylenic N,N-dimethylamides. Trapping of the intermediates with electrophiles

A study of the reaction of Me₃SnCu·.Me₂S (1) and [Me₃SnCuSPh]Li (2) with α,β - acetylenic N,N-dimethylamides 3 shows (a) that the overall process can be controlled experimentally so as to produce either N,N-dimethyl ($\text{E}$)-(4) or ($\text{Z}$)-3-trimethylstannyl-2-alkenamides (5), (b) that the initially formed intermediate derived from interaction of 2 and 3 is significantly more stable than that obtained by reaction of 2 and α,β-acetylenic esters, and (c) that the intermediate produced by treating 3 with 1 can be trapped with electrophiles other than proton.     

Theoretical Study of Ethanethiol Adsorption on HZSM-5 Zeolite

The density functional theory and the cluster model methods have been employed to investigate the interactions between ethanethiol and HZSM-5 zeolites. Molecular complexes formed by the adsorption of ethanethiol on silanol H3SiOH with two coordination forms, model Bronsted acid sites of zeolite cluster H3Si(OH)Al(OH)2SiH3 interaction with ethanethiol, aluminum species adsorbed ethanethiol have been comparatively studied. Full optimization and frequency analysis of all cluster models have been carried out using B3LYP hybrid method at 3-21G basis level for hydrogen atoms and 6-31G(d) basis set level for silicon, aluminum, oxygen, carbon, and sulfur atoms. The structures and energy changes of different coordination forms of H3Si(OH)Al(OH)2SiH3-ethanethiol, silanol-ethanethiol and Al(OH)3-ethanethiol have been studied. The calculated results showed the nature of interactions was van der Waals force as exhibited by not much change in geometric structures and properties. The preference order of ethanethiol adsorbed on HZSM-5 zeolite may be residual aluminum species, bridging hydroxyl groups and silanol OH groups from the adsorption heat. The adsorbed models of protonized ethanethiol on bridging hydroxyl OH groups and linear hydrogen bonded ethanethiol on bridging OH groups suggested in literature might not exist as revealed by this theoretical calculation. Possible adsorption models were obtained for the first time.     

Dynamic coating of a capillary with room-temperature ionic liquids for the separation of amino acids and acid drugs by capillary electrophoresis

A room-temperature ionic liquid (IL), 1-ethyl-3-methyl-imidazolium tetrafluoroborate (1E-3MI-TFB), used for the coating of a silica capillary enables one to reduce or invert the electroosmotic flow (EOF) in capillary zone electrophoresis. Excellent separations of amino acids and ary lalkanoic acids were obtained. Such separations could not be obtained in a naked capillary in the presence of the cationic surfactants cetyltrimethylammonium bromide (CTAB) or polycationic polymer hexadimethrine bromide (HDB). The results indicate that 1E-3MI-TFB not only modulates the EOF but also acts as a discriminator. Further experiments indicate that the interaction between hydrogen at C-2 carbon of IL and acid drugs plays an important role in the separation. The text was submitted by the authors in English.     

Adsorption of NH3 onto activated carbon prepared from palm shells impregnated with H2SO4

Adsorption of ammonia (NH3) onto activated carbons prepared from palm shells impregnated with sulfuric acid (H2SO4) was investigated. The effects of activation temperature and acid concentration on pore surface area development were studied. The relatively large micropore surface areas of the palm-shell activated carbons prepared by H2SO4 activation suggest their potential applications in gas adsorption. Adsorption experiments at a fixed temperature showed that the amounts of NH3 adsorbed onto the chemically activated carbons, unlike those prepared by CO2 thermal activation, were not solely dependent on the specific pore surface areas of the adsorbents. Further adsorption tests for a wide range of temperatures suggested combined physisorption and chemisorption of NH3. Desorption tests at the same temperature as adsorption and at an elevated temperature were carried out to confirm the occurrence of chemisorption due to the interaction between NH3 and some oxygen functional groups via hydrogen bonding. The surface functional groups on the adsorbent surface were detected by Fourier transform infrared spectroscopy. The amounts of NH3 adsorbed by chemisorption were correlated with the contents of elemental oxygen present in the adsorbents. Mechanisms for chemical activation and adsorption processes are proposed based on the observed phenomena.     

Protein profiles and identification of high performance liquid chromatography isolated proteins of cancer cell lines using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS) has been used to rapidly profile the protein content of human cell lysates from MCF-10 cell and variant lines. The method was used to study the protein profiles of these cells as they progressed from normal breast epithelium to fully malignant cells. Distinct differences in the protein profiles were observed with progression, and specific proteins associated with carcinogenesis (p53, c-myc, and c-erbB-2) were heavily expressed in these cells as detected by MALDI-TOFMS. These proteins were also isolated using non-porous reversed-phase high performance liquid chromatography (NP-RP-HPLC) and mass analyzed by MALDI-TOFMS to provide molecular weight information without interference from other proteins in the whole cell lysates, and to avoid suppression effects in mixtures of proteins detected by MALDI-TOFMS. In order to confirm the identity of these oncoproteins, the cell lysates were subjected to one-dimensional (1-D) gel separation and subsequently electroblotted onto a poly(vinylidene difluoride) (PVDF) membrane for further analysis. Trypsin and cyanogen bromide digestions were performed on these proteins eluted from excised PVDF bands which were then analyzed by MALDI-TOFMS. The identity of these proteins was confirmed by database matching procedures.     

Thermal degradation kinetics of polyimide containing 2,6-benzobisoxazole units

A novel polyimide (PI) based on 2,6-bis(p-aminophenyl)-benzo[1,2-d;5,4-d′]bisoxazole has been synthesized via a conventional two-stage procedure with bis(ether anhydrides) (HQDPA). The intermediate poly(amic acid) had inherent viscosities of 1.70 dl/g and could be thermally converted into light yellow polyimide film. The resulted polyimide showed excellent thermal stability, and the glass transition temperatures (T_g) were above 283 °C, the 5% weight loss temperature of the polymer was at 572 °C in N₂. The thermal degradation of the polyimide was studied by thermogravimetric analysis (TGA) in order to determine the actual reaction mechanisms of the decomposition process. The activation energy of the solid-state process was determined using Flynn-Wall-Ozawa method, which does not require knowledge of the reaction mechanism, which resulted to be 361.36 kJ/mol. The activation energy of different mechanism models and pre-exponential factor (A) were determined by Coats-Redfern method. Compared with the value obtained from the Ozawa method, the actual reaction mechanism obeyed nucleation and growth model, Avrami-Erofeev function (A₃) with integral form g(X) = [−ln(1−X)]³.     

Chromatofocusing nonporous reversed-phase high-performance liquid chromatography/electrospray ionization time-of-flight mass spectrometry of proteins from human breast cancer whole cell lysates: a novel two-dimensional liquid chromatography/mass spectrometry method

A novel two-dimensional two-column liquid chromatography/mass spectrometry (LC/MS) technique is described in this work, where chromatofocusing (CF) has been coupled to nonporous reversed-phase (NPS-RP) HPLC to separate proteins from human breast epithelial whole cell lysates. The liquid fractions from NPS-RP-HPLC are readily amenable to direct on-line analysis using electrospray ionization orthogonal acceleration time-of-flight mass spectrometry (ESI-TOFMS). A key advantage of this technique is that proteins can be 'peeled off' in the liquid phase from the CF column according to their isoelectric points (pI) in the first chromatographic separation dimension. The NPS-RP-HPLC column further separates these pI-focused fractions based upon protein hydrophobicity as the second chromatographic dimension. The third dimension involves on-line molecular weight determination using ESI-TOFMS. As a result, this method has the potential to be fully automated. In addition, a 2-D protein map of pI versus molecular weight is generated, which is analogous to a 2-D gel image. Thus, this technique may provide a means to study differential expression of proteins from whole cell lysates.     

Synthesis of PI3K inhibitor GDC-0077 via a stereocontrolled N-arylation of α-amino acids

An efficient synthesis of PI3K inhibitor GDC-0077, featuring two consecutive Cu-catalyzed CN coupling reactions, is reported. The described synthetic route involves a chemoselective Ullmann-type coupling of a chiral difluoromethyl-substituted oxazolidinone, a Cu-catalyzed N-arylation of l-alanine with high stereochemical integrity, and a high-yielding final amide bond formation step to produce GDC-0077 in >99.5 area % HPLC purity.     

Two New Steroidal Glycosides from Fermented Leaves of Agave americana

Two new spirostanol glycosides named agamenoside A and B, ere isolated from the fermented leaves of Agave americana. Their structures were elucidated as (23S,25R)-5α-spirostan-3β,6α，23－triol 3-O-α-L-rhamnopyranosyl-(1→3)-β-D-glucopyranosyl-(1→2)-[β-D-xylopyranosyl-(1→3)]-β-D-glucopyranosyl-(1→4)-β-D-galactopyranoside(1) and (25R)-5α-spiro-stan-3β,6α-diol 3-O-β-D-glucopyranosyl-(1→2)-[β-D-xylopyranosyl-(1→3)]-β-D-glucopyra-nosyl-(1→4)-β-D-galactopyranoside(2) by a combination of chemical and spectral methods.     

Thermal analysis of eugenol,isoeugenol and their benzoic acid esters

Eugenol and isoeugenol were investigated by means of thermal analysis. It was observed that eugenol and isoeugenol have one characteristic endothermic effect at 260° and 290°C, respectively, and two exothermic effects in the temperature intervals 270°–590°C. The DTA curves of the benzoyl esters of eugenol and isoeugenol begin with endothermic effects at 70° and 95°C, respectively, which coincide with the melting points of these compounds.