Ultra-low intensity electron beams of a linear accelerator for irradiation

Ultra-low intensity electron pulsed beams for irradiation have been developed by the use of the electron linear accelerator at Radiation Research Center of Osaka Prefecture University. The energy and the pulse width of the beams are about 4–12 MeV and 0.5–4 μs, respectively. The minimum beam charge has been estimated to be about several aC/pulse. These electrons are basically mono energetic, controllable, collimated and synchronized with the master oscillator of the accelerator, which are favorable features for various uses compared with β-ray sources. Especially, the system is suitable for evaluation of response of radiation detectors. In this study, the response of the TLD for high energetic electron irradiation was also evaluated by the use of these electrons.     

Single crystal X-ray diffraction study of a mixed-valence gold compound, Cs2AuAuCl6 under high pressures up to 18 GPa: Pressure-induced phase transition coupled with gold valence transition

We performed the single-crystal X-ray diffraction study of a perovskite-type gold mixed-valence compound, Cs₂Au^IAu^IIICl₆, under high pressures up to 18 GPa by using a diamond-anvil-cell with helium gas as an ideal hydrostatic pressure-transmitting medium. The lattice parameters and the variable atomic positional parameters were obtained with reasonable accuracy at various pressures. A structural phase transition at ca. 12.5 GPa from I4/mmm to Pm3m was found. The lattice parameters a₀ and c₀, denoted in the tetragonal cell setting, result in the relationship 2^1/2a₀=c₀, and the superstructure reflections h k l (l is odd), caused by the shift of the Cl ions from the midpoint of the Au ions, disappeared at pressures above the phase transition. Both elongated [Au^IIICl₆] and compressed [Au^ICl₆] octahedra in the low-pressure phase smoothly approach regular octahedra with increasing pressure. Above the structural phase transition at 12.5 GPa, all the [AuCl₆] octahedra are crystallographically equivalent, which shows that the tetragonal-to-cubic phase transition accompanies the valence transition from the Au^I/Au^III mixed-valence state to the Au^II single-valence state.     

Determination and correlation of liquid–liquid equilibria for four binary N,N-dimethylformamide + hydrocarbon systems

Liquid–liquid equilibrium measurements for four binary N,N-dimethylformamide + hydrocarbon (hexane, heptane, octane, and cyclohexane) systems were performed using a laser scattering technique. The experimentally determined cloud points were satisfactorily correlated with two local composition models (NRTL, and Tsuboka–Katayama's modification of the Wilson equation). In addition, the prediction of LLE by means of the modified UNIFAC (Dortmund) model was also tested.     

A Ruthenium(III)–Oxyl Complex Bearing Strong Radical Character

Proton‐coupled electron‐transfer oxidation of a Ru^II?OH₂ complex, having an N‐heterocyclic carbene ligand, gives a Ru^III?O^. species, which has an electronically equivalent structure of the Ru^IV=O species, in an acidic aqueous solution. The Ru^III?O^. complex was characterized by spectroscopic methods and DFT calculations. The oxidation state of the Ru center was shown to be close to +3; the Ru?O bond showed a lower‐energy Raman scattering at 732 cm^?1 and the Ru?O bond length was estimated to be 1.77(1) Å. The Ru^III?O^. complex exhibits high reactivity in substrate oxidation under catalytic conditions; particularly, benzaldehyde and the derivatives are oxidized to the corresponding benzoic acid through C?H abstraction from the formyl group by the Ru^III?O^. complex bearing a strong radical character as the active species.     

Stepwise laser photolysis studies of beta-bond cleavage in highly excited triplet states of biphenyl derivatives having C-O bonds

Photochemical profiles of beta-bond dissociation in highly excited triplet states (Tn) of biphenyl derivatives having C-O bonds were investigated in solution, using stepwise laser photolysis techniques. The lowest triplet states (T1) were produced by triplet sensitization of acetone (Ac) upon 308-nm laser photolysis. The molar absorption coefficients of the T1 states were determined using triplet sensitization techniques. Any photochemical reactions were absent in the T1 states. Upon 355-nm laser flash photolysis of the T1 states, they underwent fragmentation, because of homolysis of the C-O bond in the Tn states from the observations of the transient absorption of the corresponding radicals. The quantum yields (Phidec) for the decomposition of the T1 states upon the second 355-nm laser excitation were determined. Based on the Phidec values and the bond dissociation energies (BDEs) for the C-O bond fission, the state energies (ERT) of the reactive highly excited triplet states (TR) were determined. It was revealed that (i) the Phidec was related to the energy difference (DeltaE) between the BDE and the ERT, and (ii) the rate (kdis) of beta-cleavage in the TR state was formulated as being simply proportional to DeltaE. The reaction mechanism for beta-bond cleavage in the TR states was discussed.     

Calorimetric and Dielectric Investigations of Glass Transition in Intermediate Glass-forming Liquid

The calorimetric glass transition and dielectric dynamics of -relaxation in propylene glycol (PG) and its five oligomers (polypropylene glycol, PPG) have been investigated by the modulated differential scanning calorimetry (MDSC) and the broadband dielectric spectroscopy. From the temperature dependence of heat capacity of PPGs, it is clarified that the glass transition temperature (T_g) and the glass transition region are affected by the heating rate. The kinetic changes of PG and PPGs near T_g strongly depend on the underlying heating rate. With increasing the molecular mass of PPGs, the fragility derived from the relaxation time against temperature also increases. The PG monomer is stronger than its oligomers, PPGs, because of the larger number density of the —OH end group which tends to construct the intermolecular network structure. Adam-Gibbs (AG) theory could still hold for MDSC results due to the fact that the dielectric relaxation time can be related to the configurational entropy.This revised version was published online in November 2005 with corrections to the Cover Date.     

Living cationic polymerization of p-methylstyrene by hydrogen iodide/zinc halide initiating systems

Living cationic polymerization of p-methylstyrene has been investigated with use of hydrogen iodide/zinc halide initiating systems (HI/ZnX₂; X = Cl, I) in toluene and methylene chloride solvents. The best results were obtained with HI/ZnCl₂ below 0°C where the zinc salt was employed in excess over hydrogen iodide (HI/ZnCl₂ = 1/5 molar ratio). Under these conditions, the number-average molecular weights $ \left( {\overline {M_n } } \right)$ of the produced polymers increased proportionally to monomer conversion, further increased upon addition of fresh feeds of p-methylstyrene into completely polymerized reaction mixtures, and were in good agreement with the calculated values assuming that one living polymer chain forms per molecule of hydrogen iodide; the molecular weight distributions (MWDs) of the polymers were fairly narrow $ \left( {{{\overline {M_w } } \mathord{\left/ {\vphantom {{\overline {M_w } } {\overline {M_n } }}} \right. \kern-\nulldelimiterspace} {\overline {M_n } }} = 1.1 - 1.3} \right) $ throughout these processes. In contrast, when equimolar mixtures of hydrogen iodide and zinc chloride or iodide were employed, the polymerizations were rather slow even in methylene chloride at +25°C, and the product polymers exhibited bimodal MWDs, the lower-molecular weight fraction of which was mediated by long-lived growing species. Addition of tetra-n-butylammonium iodide as a common ion salt (nBu₄NI/HI = 1/200 molar ratio) led to unimodal MWDs consisting of the long-lived lower polymer fraction alone.     

Convenient construction of a variety of glycosidic linkages using a universal glucosyl donor

This letter deals with the concept of constructing four types (cis-α, trans-α, cis-β, and trans-β) of glycosidic linkages using a universal glucosyl donor. The selectively protected universal glucosyl donor 8 was synthesized in 36% yield from d-glucose (eight steps). The donor 8 undergoes glycosidation with a primary carbohydrate alcohol 7 to give disaccharide 9 having a 1,2-cis-α-glycosidic linkage in 90% yield. The construction of the corresponding 1,2-trans-α-glycosidic linkage was performed in 68% yield (three steps) from 9. A similar glycosidation of the 2-O-(N-phenylcarbamoyl)-glucosyl donor 6 derived from 8 with 7 gave disaccharide 11 having a 1,2-trans-β-glycosidic linkage in 75% yield. The construction of the corresponding 1,2-cis-β-linkage was performed in 53% yield (three steps) from 11.