Thermodynamic control over the competitive anchoring of N719 dye on nanocrystalline TiO2 for improving photoinduced electron generation

TiO(2) electrodes, sensitized with the N719 dye at high immersion temperatures during the sensitization process, were found to have large fractions of weakly bound N719 on the electrode surface, which resulted in dye aggregation and decreased device longevity. These disadvantages were ameliorated using a low-temperature stearic acid (SA)-assisted anchoring method described here. The activation energy (ΔE(NS)(++)) and relative fraction of strongly bound N719 were twice as large as the respective values obtained without the use of SA. Slowing of adsorption, both by thermal means and through SA-mediated processes, effectively controlled the binding mode of N719 on the surface of TiO(2). The resulting sensitized electrodes displayed enhanced device longevity and improved generation of photoinduced electrons.     

Swelling, functionalization, and structural changes of the nanoporous layered silicates AMH-3 and MCM-22

Nanoporous layered silicate materials contain 2D-planar sheets of nanoscopic thickness and ordered porous structure. In comparison to porous 3D-framework materials such as zeolites, they have advantages such as significantly increased surface area and decreased diffusion limitations because the layers can potentially be exfoliated or intercalated into polymers to form nanocomposite materials. These properties are particularly interesting for applications as materials for enhancing molecular selectivity and throughput in composite membranes. In this report, the swelling and surface modification chemistry of two attractive nanoporous layered silicate materials, AMH-3 and MCM-22, were studied. We first describe a method, using long-chain diamines instead of monoamines, for swelling of AMH-3 while preserving its pore structure to a greater extent during the swelling process. Then, we describe a stepwise functionalization method for functionalizing the layer surfaces of AMH-3 and MCM-22 via silane condensation reactions. The covalently attached hydrocarbon chain molecules increased the hydrophobicity of AMH-3 and MCM-22 layer surfaces and therefore allow the possibility of effectively dispersing these materials in polymer matrices for thin film/membrane applications.     

Investigation of the redox property of a metalloprotein layer self-assembled on various chemical linkers

Myogloblin, a well-known metalloprotein, was immobilized on a gold surface using various chemical linkers to investigate the length effect of chemical linker on the electron transfer in protein layers, because chemical linkers play roles in the pathway that transfers the electron from the protein to the gold substrate and act as protein immobilization reagents. Chemical linkers with 2, 6, 11, and 16 carbons were utilized to confirm length-effects. The immobilization of protein and chemical linker was validated with surface plasmon resonance (SPR) and atomic force microscopy (AFM). The electrochemical property was evaluated by cyclic voltammetry (CV) and chronocoulometry (CC). In those results, redox peaks of immobilized protein were controlled via the length of chemical linkers, and it could be directly applied to the realization of bioelectronic device.     

Intrinsic magnetism in Fe doped SnO2 nanoparticles

Iron doped semiconducting nanoparticles Sn_1−xFe_xO₂ with x=0, 0.001, 0.002, 0.003, 0.004, 0.01 and 0.03 were prepared by a sol-gel method. The X-ray diffraction, Transmission Electron Microscopy measurements confirm the rutile structure with no impurity phase. The three characteristic lines of electron spin resonance (ESR) are observed in the doped samples for all compositions, which is a clear evidence for rhombic Fe³⁺ in rutile phase. The line width of ESR increases with increase in Fe concentration due to induced disorder. The spin-pumping effect is observed at temperatures below 250 K for the samples with x=0.01 and 0.03. However, based on the Curie-Weiss susceptibility, iron is in paramagnetic state and is subject to weak antiferromagnetic interaction. Blue shift in the optical band gap is observed with increase in the Fe content.     

2,5-Bis(2-octyldodecyl)pyrrolo[3,4-c]pyrrole-1,4-(2H,5H)-dione-based donor-acceptor alternating copolymer bearing 5,5'-di(thiophen-2-yl)-2,2'-biselenophene exhibiting 1.5 cm2·V(-1)·s(-1) hole mobility in thin-film transistors

A novel diketopyrrolopyrrole-based π-conjugated copolymer P(DPP-alt-DTBSe), 5, and a known copolymer P(DPP-alt-QT), 4, have been synthesized in 80-90% yield using the Stille coupling reaction. The molecular weights of 4 and 5 are 58,781 and 19,271 g/mol, respectively, with polydispersity values of 3.25-3.35. A relatively small band gap of 1.32-1.39 eV and excellent solubility in organic solvents were achieved in the two polymers. Thin-film transistors made of 5 exhibit outstanding performance (e.g., μ > 1.0-1.5 cm(2)·V(-1)·s(-1), I(on)/I(off) > 10(5)-10(6)) with a conventional n-octyltrichlorosilane-SiO(2) gate dielectric.     

Synthetic studies on lytophilippine A: synthesis of the proposed structure

Synthesis of the proposed structure of lytophilippine A was accomplished employing SmI(2)-mediated 5-exo cyclization of an aldehydo β-alkoxyvinyl sulfoxide and ring-closing metathesis reaction.     

Hydrolytic degradation behavior of poly(rac-lactide)-block-poly(propylene glycol)-block-poly(rac-lactide) dimethacrylate derived networks designed for biomedical applications

For polymer-based degradable implants, mechanical performance and degradation behavior need to be precisely controlled. Based on a rational design, this work comprehensively describes the properties of photo-crosslinked polymer networks prepared from poly(rac-lactide)-block-poly(propylene glycol)-block-poly(rac-lactide) dimethacrylate precursors during degradation. By varying the length of poly(rac-lactide) blocks connected to a central 4 kDa polyether block, microphase separated networks with adjustable crosslinking density, hydrophilicity/hydrophobicity ratio, thermal, and mechanical properties are obtained. The materials are characterized by a low water uptake, controlled mass loss, and slowly decreasing wet-state E moduli in the kPa range.     

Large-scale synthesis of uniform and extremely small-sized iron oxide nanoparticles for high-resolution T1 magnetic resonance imaging contrast agents

Uniform and extremely small-sized iron oxide nanoparticles (ESIONs) of < 4 nm were synthesized via the thermal decomposition of iron-oleate complex in the presence of oleyl alcohol. Oleyl alcohol lowered the reaction temperature by reducing iron-oleate complex, resulting in the production of small-sized nanoparticles. XRD pattern of 3 nm-sized nanoparticles revealed maghemite crystal structure. These nanoparticles exhibited very low magnetization derived from the spin-canting effect. The hydrophobic nanoparticles can be easily transformed to water-dispersible and biocompatible nanoparticles by capping with the poly(ethylene glycol)-derivatized phosphine oxide (PO-PEG) ligands. Toxic response was not observed with Fe concentration up to 100 μg/mL in MTT cell proliferation assay of POPEG-capped 3 nm-sized iron oxide nanoparticles. The 3 nm-sized nanoparticles exhibited a high r(1) relaxivity of 4.78 mM(-1) s(-1) and low r(2)/r(1) ratio of 6.12, demonstrating that ESIONs can be efficient T(1) contrast agents. The high r(1) relaxivities of ESIONs can be attributed to the large number of surface Fe(3+) ions with 5 unpaired valence electrons. In the in vivo T(1)-weighted magnetic resonance imaging (MRI), ESIONs showed longer circulation time than the clinically used gadolinium complex-based contrast agent, enabling high-resolution imaging. High-resolution blood pool MR imaging using ESIONs enabled clear observation of various blood vessels with sizes down to 0.2 mm. These results demonstrate the potential of ESIONs as T(1) MRI contrast agents in clinical settings.     

Simultaneous LC?CMS?CMS Determination of HM30181A, [2-(2-{4-[2-(6,7-Dimethoxy-3,4-dihydro-1H-isoquinolin-2-yl)-ethyl]-phenyl}-2H-tetrazol-5-yl)-4,5-dimethoxyphenyl]amide, as a new P-Glycoprotein Inhibitor and Its Two Metabolites, M1 and M2, in Human Plasma: Application to a Pharmacokinetic Study

A simultaneous simple, rapid, and sensitive LC?CMS?CMS method was developed and validated for the determination of HM30181A, [2-(2-{4-[2-(6,7-dimethoxy-3,4-dihydro-1H-isoquinolin-2-yl)-ethyl]-phenyl}-2H-tetrazol-5-yl]-4,5-dimethoxy-phenyl]amide, as a P-glycoprotein inhibitor and its two metabolites, M1 and M2, in human plasma using docetaxel as an internal standard (IS). The analytes were extracted from 200???L of biological sample by liquid?Cliquid extraction using 1?mL of methyl-t-butyl ether. Chromatographic separation was carried on a Luna C8 column at 30???C with mobile phase consisting of distilled water with 0.1% formic acid and acetonitrile (75:25, v/v) at a flow rate of 0.7?mL?min^?1 for human plasma samples. The method was linear over concentration ranges of 0.5?C50, 0.1?C10, and 0.1?C10?ng?mL^?1 for HM30181A, M1, and M2, respectively, in human plasma. The values of coefficient variation for the assay precision were <12.5, <9.10, and <9.96% for HM30181A, M1, and M2, respectively, in human plasma. The values of accuracy were 93.0?C108, 94.7?C104%, and 95.7?C105% for HM30181A, M1, and M2, respectively, in human plasma. This method is simple, sensitive, and applicable for the pharmacokinetic studies of HM30181A and its metabolites in humans.     

Formulation variation and in vitro-in vivo correlation for a rapidly swellable three-layered tablet of tamsulosin HCl

In order to develop a preferable once-a-day oral tablet formulation, various formulations of three-layered tablets containing tamsulosin HCl as a hydrophilic model drug were evaluated and compared with a commercial reference, tamsulosin OCAS?. When the test tablet was exposed to a release medium, the medium quickly permeated to the mid-layer and the two barrier layers swelled surrounding the mid-layer rapidly. Volume expansion showed faster and enough swelling of the three-layered tablet up to 2 h. Larger amount of barrier layers caused reduced release kinetics and a high molecular weight polymer showed more resistance against agitation force. A formulation with water-soluble mid-layer showed fast erosion decreasing its volume significantly. On the pharmacokinetic study, the mean ratio of area under the curve (AUC) and C(max) for the test formulation to the reference was 0.69 and 0.84, respectively, showing that the absorption of the drug was less complete than the reference. Plasma concentration at 24 h of the test formulation was higher than the reference. The Wagner-Nelson method showed that decreased initial dissolution rate might be the cause of the less complete absorption. On considering in vitro-in vivo correlation (IVIVC), level A, the reference (R2=0.981) showed more linear relationship than the test (R2=0.918) due to the decreased dissolution and absorption rate of the formulation. This result suggests that the in vitro dissolution profiles and release kinetics might be useful in correlating absorption kinetics as well as overall plasma drug concentration-time profiles for formulation studies.