Biohydrogen Production from Mushroom Cultivation Waste by Anaerobic Solid‐state Fermentation

Mushroom cultivation waste (MCW) is a polypropylene bag stuffed with wood flour and nutrients for growing mushroom, which is a feasible feedstock for anaerobic biohydrogen production owing to its abundant availability, high organic and nutrient content. This study optimized the seed inoculum from various waste sludges (sewage sludge, cow dung and pig slurry), nutrient addition and operation conditions (moisture content and MCW powder particle size) for maximal biohydrogen production by solid‐state fermentation (SSF). SSF batch test was operated at a MCW 3 g total volatile solid (TVS)/L, temperature 55 °C and rotation speed of 15 rpm with a vertical rotative shaker. The peak hydrogen production performance of hydrogen production rate (HPR) 9.50 mol H₂/kg‐d and hydrogen yield (HY) 0.29 mmol H₂/g TVS) are obtained using sewage sludge 2 seed inoculum, nutrients addition, moisture content 70 % and particle size of 1.190～0.590 mm. The results show that the MCW has the potential for hydrogen production by anaerobic mixed microflora using solid‐state fermentation. The bioenergy of 1842 kWh while using SSF to conver MCW to produce biohydrogen and it could reduce CO₂ emission of 114–178 kg per year comparing using fossil fuel such as coal, fuel oil and natural gas.     

D3R grand challenge 2015: Evaluation of protein–ligand pose and affinity predictions

The Drug Design Data Resource (D3R) ran Grand Challenge 2015 between September 2015 and February 2016. Two targets served as the framework to test community docking and scoring methods: (1) HSP90, donated by AbbVie and the Community Structure Activity Resource (CSAR), and (2) MAP4K4, donated by Genentech. The challenges for both target datasets were conducted in two stages, with the first stage testing pose predictions and the capacity to rank compounds by affinity with minimal structural data; and the second stage testing methods for ranking compounds with knowledge of at least a subset of the ligand–protein poses. An additional sub-challenge provided small groups of chemically similar HSP90 compounds amenable to alchemical calculations of relative binding free energy. Unlike previous blinded Challenges, we did not provide cognate receptors or receptors prepared with hydrogens and likewise did not require a specified crystal structure to be used for pose or affinity prediction in Stage 1. Given the freedom to select from over 200 crystal structures of HSP90 in the PDB, participants employed workflows that tested not only core docking and scoring technologies, but also methods for addressing water-mediated ligand–protein interactions, binding pocket flexibility, and the optimal selection of protein structures for use in docking calculations. Nearly 40 participating groups submitted over 350 prediction sets for Grand Challenge 2015. This overview describes the datasets and the organization of the challenge components, summarizes the results across all submitted predictions, and considers broad conclusions that may be drawn from this collaborative community endeavor.     

Spectral characteristics for a fiber grating external cavity laser

A numerical investigation has been carried out on the influence of the antireflection (AR) coating of laser, the coupling efficiency of laser and fiber (), and the reflectivity of fiber grating (R _g) on the side-mode suppression ratio (SMSR) of the fiber grating external cavity laser (FGECL). The FGECL was fabricated by the assembly of the multimode Fabry–Perot (FP) laser chip and fiber grating. The results showed that the FGECL with a lower AR coating, higher and R _g exhibited a better SMSR. A comparison of the SMSR dependence on the and R _g showed that SMSR increased more rapidly with increasing than SMSR for R _g. These spectral characteristic studies of the SMSR dependence on the device parameters of the AR coating, , and R _g may provide useful device designs for the practical fabrication of a FGECL for use in dense wavelength division multiplexing (DWDM) applications.     

Simultaneous Separation of Four Types of Steroid Hormones by Micellar Electrokinetic Chromatography with Cetyltrimethylammonium Bromide

Micellar electrokinetic chromatography (MEKC) using a cationic surfactant, cetyltrimethylammonium bromide (CTAB), was applied to simultaneous separation of four types of hydrophobic steroid hormones including androgens, estrogens, progestins, and glucocorticoids. Various parameters, such as the concentration of CTAB, type and proportion of organic modifiers, and sample matrix have been demonstrated to be important with respect to the separation resolution, analysis time, and repeatability. Successful separation of cortisone, hydrocortisone, estriol, testosterone, estrone, progesterone, and estradiol was achieved at ?25 kV using 100 mM Tris‐boric acid buffer (pH 9.0) containing 40 mM CTAB and 20% 2‐propanol using ultraviolet (UV) absorption detection. For estrogen compounds which possess intrinsic fluorescence, detection limits at the sub μM level could be achieved with laser‐induced fluorescence (LIF) detection. Two kinds of pharmaceutical preparations were analyzed using the developed method, and the results were in good agreement with the label claims.     

Exfoliation of smectite clays by branched polyamines consisting of multiple ionic sites

Exfoliation through an ionic exchange reaction of layered silicate clays, including synthetic fluorinated mica (Mica) and natural montmorillonite (MMT), were achieved by using polyvalent amine salts as the intercalating agents. The requisite polyamine was synthesized from the epoxy/amine coupling reaction, involving a trifunctional poly(oxypropylene)-triamine (ca. 440 g/mol M_w) and diglycidyl ether of bisphenol-A. The polyamine was a mixture of oligomeric adducts consisting of multiple amine functionalities and a branched backbone. Partial acidification by HCl addition generated a series of amine salts that affected the intercalation and the expansion of the silicate interlayer in the range of 15.2-60.0 Å XRD d spacing. At the specific acidified ratio (H⁺/amine = 1/3 equiv ratio), the polyamine salts rendered the clay’s layered structure into randomization. The result was confirmed by using XRD and transmission electronic microscopy (TEM). The hybrids of polyamines and Mica or MMT were blended into epoxy resins and cured into nanocomposites, which exhibited the improvements of thermal stability and hardness.     

Effect of P/Si polymeric silsesquioxane and the monomer compound on thermal properties of epoxy nanocomposite

The unique polymeric silsesquioxane/4,4′-diglycidyether bisphenol A (DGEBA) epoxy nanocomposites have been prepared by sol-gel method. The structure of nanocomposites was characterized by attenuated total reflectance (ATR) and solid state ²⁹Si NMR. The characteristic intensity of trisubstituted (T) structure was higher than that of tetrasubstituted (Q) structure from solid state ²⁹Si NMR spectra of 3-isocyanatopropyltriethoxysilane (IPTS) modified epoxy. The activation energies of curing reaction of epoxy system and IPTS modified epoxy system are 28-66 kJ/mol and 57-75 kJ/mol, respectively, by Ozawa’s and Kissinger’s methods. The triethyoxysilane side chain of IPTS modified epoxy might interfere the curing reaction of epoxy/amine and increase the activation energy of curing. The thermal degradation of nanocomposites was investigated by Thermogravimetric analysis (TGA). The char yield of nanocomposites was proportional to the 2-(diphenylphosphino)ethyltriethoxysilane (DPPETES) moiety content at high temperature. A higher char content could inhibit thermal decomposition dramatically and enhance the thermal stability. Moreover, the nanocomposites possess high optical transparency.     

Synthesis of ZnO/polystyrene composites particles by Pickering emulsion polymerization

ZnO/polystyrene composite particles were synthesized by Pickering emulsion polymerization. ZnO nanoparticles were first prepared by reaction of zinc acetate and sodium hydroxide in ethanol medium. Then different amount of styrene monomer was emulsified in water in the presence of ZnO nanoparticles either by mechanical stirring or by sonication, followed by polymerization of styrene. Two kinds of initiators were used to start the polymerization, azobisisobutyronitrile (AIBN) and potassium persulfate (KPS). The X-ray diffraction pattern verified the crystal structure of ZnO and FT-IR spectra evidenced the existence of ZnO and polystyrene (PS) in ZnO/polystyrene composite particles. Different morphologies were observed for the composite particles when using different initiators. From TEM photographs, AIBN-initiated system produced mainly core-shell composite particles with PS as core and ZnO as shell, while KPS-initiated system showed both composite particles and pure PS particles. Two schemes of reaction mechanism were proposed to explain the morphologies accordingly. Both systems of composite particles showed good pH adjusting ability.     

Reactions of the (2-pyridyl) pyrrolide platinum(II) complex driven by sterically encumbered chelation: a model for the reversible attack of alcohol at the coordinated carbon monoxide

Treatment of 3,5-bis(trifluoromethyl)-2-(2'-pyridyl)pyrrole (fpyroH) with Pt(DMSO)2Cl2 and Na2CO3 in THF solution gave a light-yellow complex denoted as [Pt(fpyro)2] (1). A single-crystal X-ray diffraction study on 1 revealed a large conformational distortion around the platinum(II) center, which is attributed to interligand repulsion between the pyridyl groups and the CF3 substituents of the nearby pyrrolides. Reaction of 1 with N- and C-donor ligands such as acetonitrile, pyridine, isocyanide, and CO affords the adducts [Pt(fpyro)2(L)], L = NCMe (2), pyridine (3), CNBut (4), and CO (5), showing formation of one monodentate fpyro ligand by release of the strain energy. The variable-temperature 1H NMR studies showed a static structure for the N-substituted adducts 2 and 3, whereas the C-adducts 4 and 5 are shown to be more labile, displaying a pairwise exchange of bidentate and monodentate fpyro ligands in solution. Addition of ethanol to the coordinated CO in 5 during recrystallization is also established, affording an ethoxycarbonyl complex [Pt(fpyro)(fpyroH)(CO2Et)] (6), which was isolated as a crystalline solid and can be readily converted back to 5 and free ethanol upon dissolution at room temperature.     

An Overview of Recent Advances in the Synthesis of Organic Unsymmetrical Disulfides

Organic unsymmetrical disulfides have been extensively applied in various academic and industrial fields including intermediates in organic synthesis, agriculture, and food science, natural materials, biochemistry, pharmaceutical and medicine chemistry, polymers, material engineering, etc. They play a crucial role in the fabrication of various biological active sulfur heterocycles. Due to broad and extensive applications, many methods have been developed for the synthesis of unsymmetrical S−S and efforts have been made to improve some issues such as cost, energy efficiency, green chemistry, avoid or minimizing waste generation. Several outstanding review articles have been previously published highlighting the advances of S−S bond formation, in general, using various reagents under different conditions in the absence or presence of oxidants/catalysts. In 2020, a review paper was published by our group focusing on recent developments since 2014 in the synthesis of organic symmetrical disulfides. However, investigations on new catalytic methods are being regularly reported and new types of unsymmetrical disulfides are synthesized. The present overview has attempted to systematically summarize recent advances in the process of unsymmetrical S−S bond formation with a major focus since 2010, highlighting mechanistic considerations, substrate scope, advantages, and limitations. The patents are not studied in this overview.     

Chemical constituents of Antrodia camphorata submerged whole broth

One new compound, 10-hydroxy-gamma-dodecalactone (1) and three natural new compounds, 11-hydroxy-gamma-dodecalactone (2), 2-(2-hydroxyethyl)phenol (3) and 12-hydroxydodecanoic acid methyl ester (4), together with eight known compounds, ergostatrien-3beta-ol, ergosterol peroxide, methyl (4-hydroxyphenyl)acetate, vanillin, 4-hydroxybenzaldehyde, hexadecanoic acid, 5-methoxymethylfuran-2-carbaldehyde and 5-hydroxymethylfuran-2-carbaldehyde, all were isolated from the submerged whole broth of Antrodia camphorata. The structures of 1 and 2 were principally elucidated by spectral evidence and the absolute configuration was elucidated by the modified Mosher's method.