光辅助超高真空CVD系统制备SiGe异质结双极晶体管研究

介绍了采用紫外光化学汽相淀积(UVCVD)、超高真空化学汽相淀积(UHVCVD)和超低压化学汽相淀积(ULPCVD)技术研制的化学汽相淀积(CVD)工艺系统,简称U³CVD系统.应用该系统,在450℃低温和10^-7Pa超高真空环境下研制出了硅锗(SiGe)材料和硅锗异质结双极晶体管(SiGe HBT)材料.实验表明,该系统制备的SiGe HBT材料性能良好.     

Two-dimensional phased arrays for surgical applications: Multiple focus generation and scanning

A numerical simulation and a comparative analysis of the acoustic fields produced by two-dimensional phased arrays intended for ultrasonic surgery are performed for the case of a multiple focus (in particular, 25 foci) generation. The calculations were conducted for arrays (with an operating frequency of 1.5 MHz) consisting of 256 elements 5 mm in diameter, which were positioned on the array surface both regularly and randomly. The array foci can be formed simultaneously, but, in this case, the intensity levels of the secondary peaks in the ultrasonic field can exceed the values that guarantee the safe application of this method in surgery. A much safer way is to synthesize many foci with the use of several configurations, each of which contains a smaller number of foci. The number of foci in individual configurations must be approximately the same. It is demonstrated that randomization of the element distribution over the array surface provides an opportunity to improve the array performance, to reduce the intensity levels of secondary peaks in the acoustic field, and to increase the array capability for multiple focus scanning off the array axis.     

Banach-stone theorems and separating maps

LetC(X,E) andC(Y,F) denote the spaces of continuous functions on the Tihonov spacesX andY, taking values in the Banach spacesE andF, respectively. A linear mapH:C(X,E)→C(Y,F) isseparating iff(x)g(x)=0 for allx inX impliesHf(y)Hg(y)=0 for ally inY. Some automatic continuity properties and Banach-Stone type theorems (i.e., asserting that isometries must be of a certain form) for separating mapsH between spaces of real- and complex-valued functions have already been developed. The extension of such results to spaces of vector-valued functions is the general subject of this paper. We prove in Theorem 4.1, for example, for compactX andY, that a linear isometryH betweenC(X,E) andC(Y,F) is a “Banach-Stone” map if and only ifH is “biseparating (i.e,H andH ⁻¹ are separating). The Banach-Stone theorems of Jerison and Lau for vector-valued functions are then deduced in Corollaries 4.3 and 4.4 for the cases whenE andF or their topological duals, respectively, are strictly convex. Research supported by the Fundació Caixa Castelló, MI/25.043/92     

Lagrangian Duality in Set-Valued Optimization

In this paper, we study optimization problems where the objective function and the binding constraints are set-valued maps and the solutions are defined by means of set-relations among all the images sets (Kuroiwa, D. in Takahashi, W., Tanaka, T. (eds.) Nonlinear analysis and convex analysis, pp. 221–228, 1999). We introduce a new dual problem, establish some duality theorems and obtain a Lagrangian multiplier rule of nonlinear type under convexity assumptions. A necessary condition and a sufficient condition for the existence of saddle points are given. The authors thank the two referees for valuable comments and suggestions on early versions of the paper. The research of the first author was partially supported by Ministerio de Educación y Ciencia (Spain) Project MTM2006-02629 and by Junta de Castilla y León (Spain) Project VA027B06.     

Change in the magnetic state of a surface upon formation of hydrogen bonds during adsorption

It is established that reversible adsorption of water and methyl alcohol molecules, occurring via formation of hydrogen bonds, changes the dynamic properties of domain walls in the surface region of soft ferromagnets, as well as their initial static magnetic susceptibility. A mechanism is proposed for the effects revealed.     

On the Use of the Restitution Condition in Flexible Body Dynamics

The difference between the classical treatment offlexible body impact and the treatment of impact in flexiblemultibody dynamics is due to several fundamental reasons. Inthe classical impact theory, simple structures such as beamsand plates are used. Infinite dimensional models can bedeveloped for these simple structural elements to study theimpact dynamics and the wave propagation problem. Flexiblemultibody impact problems, on the other hand, involve bodieswith complex geometry that cannot be modeled using infinitenumber of degrees of freedom. Furthermore, the classicalimpact theory has been mainly concerned with the impactbetween a rigid mass that moves without constraints beforeit impacts a simple flexible structure. This is not amultibody simulation scenario in which the impact occursbetween kinematically constrained bodies that are subjectedto impulsive constraint forces in addition to the impactforces. These constraint forces can influence the motion ofthe two bodies immediately after impact, and as aconsequence, the simple classical theory scenario of impactdoes not apply. It is the objective of this paper to discussthe use of the restitution condition in flexible multibodyimpact problems and demonstrate that the use of thisapproach does not exclude the classical formulation.Nonetheless, the impulse momentum balance approach can serveas an effective and efficient procedure for solving theimpact problem in finite dimensional models that do not obeythe classical wave theory. Energy results of simplestructural elements are presented in order to demonstratethe consistency of using the impulse momentum balanceapproach in solving impact problems in finite dimensionalflexible body applications.     

Graphitic nanofillers in PMMA nanocomposites—An investigation of particle size and dispersion and their influence on nanocomposite properties

Mechanical, thermal, and electrical properties of graphite/PMMA composites have been evaluated as functions of particle size and dispersion of the graphitic nanofiller components via the use of three different graphitic nanofillers: “as received graphite” (ARG), “expanded graphite,” (EG) and “graphite nanoplatelets” (GNPs) EG, a graphitic materials with much lower density than ARG, was prepared from ARG flakes via an acid intercalation and thermal expansion. Subsequent sonication of EG in a liquid yielded GNPs as thin stacks of graphitic platelets with thicknesses of ～10 nm. Solution‐based processing was used to prepare PMMA composites with these three fillers. Dynamic mechanical analysis, thermal analysis, and electrical impedance measurements were carried out on the resulting composites, demonstrating that reduced particle size, high surface area, and increased surface roughness can significantly alter the graphite/polymer interface and enhance the mechanical, thermal, and electrical properties of the polymer matrix. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2097–2112, 2007     

Development of a universal constant rate thermal analysis system for being used with any thermoanalytical instrument

The SCTA method implies to control the temperature in such a way that the reaction rate changes with the time according to a function previously defined by the user. Constant Rate Thermal Analysis (CRTA) is one of the most commonly used SCTA methods and implies achieving a temperature profile at which the reaction rate remains constant all over the process at a value previously selected by the user. This method permits to minimize the influence of heat and mass transfer phenomena on the forward reaction. The scope of this work is to develop a universal CRTA temperature controller that could be adapted to any thermoanalytical device. The thermoanalytical signal is programmed to follow a preset linear trend by means of a conventional controller that at the time controls a second conventional temperature programmer that forces the temperature to change for achieving the trend programmed for the thermoanalytical signal. Examples of the performance of this control system with a Thermobalance and a Thermomechanical Analyser (TMA) are given.